BCD996T
From The RadioReference Wiki
BCD996T
Feature Summary
- Memory Architecture
Dynamic allocation. Construction: 400 Systems, 6000 Channels*
Maximum Systems: 400 Maximum Channel Groups per System: 20 Maximum Channels in a Trunked System: 200 Maximum Channels in a Conventional System: Limits of memory
- Creation of Systems and Channel Groups use some channel slots, so the total number of channels could be less than 6000.
- Search with Scan
- Temporary Lockout
- 99 System Quick Keys + 10 Group Quick Keys per System
- Startup Configuration – lets you set systems to be automatically locked or unlocked during power-up.
- Single-Handed Function Operation
- Priority Scan
- Priority Plus
- Channel Alert
- Alert Plus – keeps the scanner silent except during alert events (channel with programmed alert, weather alert, location alert, etc).
- Dropout Delay
- Attenuator
- Repeater Reverse
- Quick Recall – quickly navigates to a specific Channel by choosing the System, Group, and Channel.
- Weather and SAME Alert
- 10 Custom Search Ranges
- Service Search – Public Safety, News, HAM Radio, Marine, Railroad, Air, CB Radio, FRS/GMRS, Racing, TV Broadcast, FM Broadcast, Special, Military Air
- Tone Search – Rapidly searches for the CTCSS/DCS used during a transmission.
- Fire Tone-Out
- Frequency Autostore
- ID Autostore
- Quick Search
-panel keys.
- 200 Search Lockouts
- Alpha Tagging – For System, Group, Channel, Talkgroup ID, Custom Search Range and SAME Group. The scanner allows up to 16 characters for each name.
- Duplicate Input Alert
- Data Skip
- Broadcast Screen – sets the scanner to ignore hits on Pager, FM, UHF TV, VHF TV, NOAA WX and custom band frequencies.
- Trunk Tracking – supports the following systems:
- Motorola: Type I 800 / Type II 800, 900, UHF, VHF, P25
- EDACS: WIDE, NARROW, SCAT
- LTR
- APCO Project 25 Decoder – lets you listen to digitalized voice data that is compliant with the APCO Project25 standard.
- APCO Auto Adjust Threshold
- Multi-Site Trunking – allows independent system sites to share common talk group channel lists.
- Control Channel Only mode
- Battery Save
- Two-Color LCD and Keypad Backlight – select red or green backlighting.
- Independent Alert Tone Volume – lets you set the volume level of the following tones: Key Beep, Emergency Alert, Channel Alert, Close Call Alert and Battery Low Alert.
- Key Lock
- Close Call RF Capture
- Close Call Do-Not-Disturb – sets Close Call RF Capture to operate only when no transmission is being received.
- Close Call Temporary Store – automatically saves and scans the last 10 Close Call hits.
- PC Control
- Wired Cloning
- On-Air Programming
- Scan Speed – 100 CH/Sec. in Scan Mode (max)
- Search Speed / Turbo Search – 100 Steps/Sec. in Search Mode (max) - except for 5 kHz step. 300 Steps/Sec. in Search Mode (max) - (Turbo Search) - for 5 kHz step
- Memory Back Up
- Trunking Activity Indicators
- Audio AGC
- Location-Based Scanning – Each system can include latitude, longitude, and range information and can be automatically enabled/disabled when a GPS is connected and the unit is within the defined range of the system.
- Non-Radio Location-Based Features – the scanner can include location alerts (that sound alert tones when the unit approaches a defined latitude/longitude) and speed-trap alerts (that sound alert tones if the unit is traveling at > than a set speed limit while it is within a grid area).
- GPS Display Mode – displays location and travel information based on the GPS input.