Actions

Difference between revisions of "Programming the P2 Scanners for DMR / MOTOTRBO"

From The RadioReference Wiki
 
(28 intermediate revisions by the same user not shown)
Line 2: Line 2:
  
  
−
;Is there a way to calculate the frequency from the LCN in a Tier III system?
+
==Check Your Firmware Version==
−
* Yes, see the {{Thread|voice-control-channel-decoding-software.26|395387-lcn-to-frequency-calculator-for-dmr-tiii.html|LCN to Frequency Calculator for Tier III}}
+
'''Required:''' The following firmware versions are required to copy DMR / MOTOTRBO. These are paid upgrades and applied (using the front port on the BCD996P2) using BC VUP3
−
**Note:  This will also work with other DMR types that have a defined bandplan
+
If you have questions / problems with the upgrade, please post in the {{Forum|uniden-tech-support.248|Uniden Tech Support}}.
 +
* You can check your firmware version by selecting ''MENU --> Settings --> See Scanner Info''
 +
* See this [https://www.youtube.com/watch?v=WB4rii_u7n4&t=20s&ab_channel=ZipScanners video] from ZipScanners for how to access my uniden com
 +
* [http://info.uniden.com/twiki/bin/view/UnidenMan4/InstallingBC_VUP Install BC VUP3.03]
 +
* [http://info.uniden.com/twiki/bin/view/UnidenMan4/UsingBC_VUP Using the BC VUP Firmware Updater (3.03)]
 +
* BCD996P2: current version: 1.09.12 <sup>1</sup>
 +
* BCD325P2: current version: 1.09.12 <sup>2</sup>
 +
 
 +
; Notes
 +
#If your scanner's serial number starts with '''378A''', be sure to use '''ONLY this (or newer)''' version. The scanner will '''stop working''' using earlier versions. If your scanner's serial number starts with '''378Z''', you can update to this (or newer) versions.
 +
#If your scanner's serial number starts with '''379B''', be sure to use '''ONLY this (or newer)''' version. The scanner will '''stop working''' using earlier versions. If your scanner's serial number starts with '''379Z''', you can update to this (or newer) versions.
 +
 
 +
==General and How Tos==
 +
; Why won't my scanner receive DMR on Slot 1 and or Slot 2
 +
* Try reversing Slot numbers compared to System's Slot numbering.
 +
 
 +
 
 +
;On DMR I can't see the Flavor Type, Color Code or Slot
 +
* Display Mode 1 - will show the flavor (CON, CAP, XPT, etc).
 +
* Display Mode 2 - will show the Color Code.
 +
* Display Mode 3 - will show the slot.
 +
 
 +
 
 +
;Can You Program a frequency on the 325P2 or 996P2 to show DMR information?
 +
* Yes. When you program it, press '''Hold''' and set the mode to '''Digital'''`
 +
* Press Func + 6.  There are 3 modes; Mode 1 shows NXDN or DMR, Mode 2 shows CC or RAN, Mode 3 shows slot or UID
 +
 
 +
 
 +
;Can the 325P2 and 996P2 search for a NAC (P25), Color Code (DMR), RAN or Area (NXDN)?
 +
* Yes. Go to Srch/CloCall Opt, then Tone/Code Search, then NAC/CC/RAN/Area.
 +
 
 +
 
 +
;Can you program the P2 scanners to run in Search mode if there are no talkgroups listed?
 +
* Yes, but you must enter one dummy talkgroup as a placeholder.
 +
 
 +
 
 +
;Does Close Call work on a DMR channel?
 +
*  It will work on the base station or repeater since there's a continuous carrier, but it won't work on subscriber units which transmit in 30ms bursts
 +
 
 +
==Random Tips==
 +
* {{Thread|uniden-tech-support.248|453466-dmr-upgrade-for-my-bcd996p2.html|DMR Upgrade for my BCD996P2}}
 +
* {{Thread|uniden-tech-support.248|455640-assistance-programming-dmr-bcd996p2.html|Assistance Programming DMR BCD996P2}}
 +
* {{Thread|uniden-tech-support.248|464885-bcd325p2-dmr-tier-3-t3-tiii-programming.html|BCD325P2 DMR Tier 3 Programming}}
 +
* {{Thread|uniden-tech-support.248|466381-mototrbo-dmr-system-monitoring-for-newbie.html|MOTOTRBO DMR System Monitoring For Newbie}}
 +
* {{Thread|uniden-tech-support.248|467082-dmr-oft-question.html|DMR OFT Question}}
 +
*If you are running in ID Search mode, you will need a dummy department if you wish to store it
 +
*Discovery does need a dummy department
 +
 
 +
==Programming with Software==
 +
* FreeScan does not support programming DMR / MOTOTRBO.  Use [https://www.proscan.org ProScan] or [https://www.butelsoftware.com ARC-XT] for this
 +
 
 +
 
 +
==System Types==
 +
===DMR Conventional===
 +
* If you wish to scan a DMR Conventional channel that says 'TG 16777215 (ALL TG)' in the database, program it as a conventional frequency. That will increase scan speed and will still allow you to hear everything on that channel.
 +
<small> Thanks Joe Bearcat</small>
 +
 
 +
 
 +
===Capacity Types and Connect Plus Systems===
 +
;If the system is in the database as a MOTOTRBO Capacity Max or Connect Plus system, where can I find the color code, LCN and LSN?
 +
[[Image:Site Freq Table CapMax.jpg|Site Frequency Table|right]]
 +
# Go to the database listing
 +
# Click on a site name under '''Name'''
 +
# On the next form, go all the way to the bottom and look on the left for the '''Site Frequency Table'''. An example is shown on the right
  
  
−
;How Can I find the correct LCN to use in Uniden scanners for a Tier III System?'''
+
===Hytera Systems===
 +
* See the {{Thread|voice-control-channel-decoding-software.26|454634-understanding-xpt-trunking.html|Understanding XPT Trunking}}
 +
;How Can I find the correct LCN to use in Uniden scanners for a Hytera System?'''
 
[[Image:Site Frequency Table.jpg|Site Frequency Table|right]]
 
[[Image:Site Frequency Table.jpg|Site Frequency Table|right]]
 
# If it's in the database, go to the frequency listing
 
# If it's in the database, go to the frequency listing
−
# Click on a name under '''Name'''
+
# Click on a site name under '''Name'''
 
# On the next form, go all the way to the bottom and look on the left for the '''Site Frequency Table'''. An example is shown on the right
 
# On the next form, go all the way to the bottom and look on the left for the '''Site Frequency Table'''. An example is shown on the right
 
# Take the channel number, reduce it by 1 and divide the result by 2. This will be the LCN that Uniden scanners will recognize
 
# Take the channel number, reduce it by 1 and divide the result by 2. This will be the LCN that Uniden scanners will recognize
  
 +
===Tier III (Trunking) Systems===
 +
* {{Thread|uniden-tech-discussion.248|470876-dmr-programming-help.html|DMR Programming Help (DMR Tier 3)}}
 +
;Is there a way to calculate the frequency from the LCN in a Tier III system?
 +
* {{Thread|voice-control-channel-decoding-software.26|460906-capacity-max-tier-3-finding-lcns.html|Capacity Mzx Tier 3 Finding LCNs}}
 +
* Yes, see the {{Thread|voice-control-channel-decoding-software.26|395387-lcn-to-frequency-calculator-for-dmr-tiii.html|LCN to Frequency Calculator for Tier III}}
 +
**Note:  This will also work with other DMR types that have a defined bandplan
  
  
−
; Since the P2 scanners don't have the Analyze or LCN Finder functions, how can you use them to research and hear DMR MOTOTRBO?
+
----
−
* You can use the [[Control Channel Data Output]] function to feed audio to utilities like DSD Plus
+
* Return to [[Uniden DMA Scanner Features and Functions]]
−
* See our [[Trunked Radio Decoders]] page for links to decoding software
+
* Return to [[Uniden DMA FAQ]]
−
* See this {{Thread|voice-control-channel-decoding-software.26|428325-how-to-setup-dsd-fastlane-dmr-tiii-frequencies-talkgroup-and-networks.html|How to set up DSD Fastlane for DMR Tier III frequencies, talkgroups and networks}}
 
−
 
 
−
 
 
  
−
---
 
−
* Return to [[Program your DMA Scanner]]
 
  
 
[[Category:Programming FAQs and Tips for Uniden Scanners]]
 
[[Category:Programming FAQs and Tips for Uniden Scanners]]

Latest revision as of 11:40, 16 April 2024

Please document any tips and tricks for programming DMR and MOTOTRBO systems, manually or with ProScan or ARC-XT, here


Check Your Firmware Version

Required: The following firmware versions are required to copy DMR / MOTOTRBO. These are paid upgrades and applied (using the front port on the BCD996P2) using BC VUP3 If you have questions / problems with the upgrade, please post in the Uniden Tech Support Forum.

Notes
  1. If your scanner's serial number starts with 378A, be sure to use ONLY this (or newer) version. The scanner will stop working using earlier versions. If your scanner's serial number starts with 378Z, you can update to this (or newer) versions.
  2. If your scanner's serial number starts with 379B, be sure to use ONLY this (or newer) version. The scanner will stop working using earlier versions. If your scanner's serial number starts with 379Z, you can update to this (or newer) versions.

General and How Tos

Why won't my scanner receive DMR on Slot 1 and or Slot 2
  • Try reversing Slot numbers compared to System's Slot numbering.


On DMR I can't see the Flavor Type, Color Code or Slot
  • Display Mode 1 - will show the flavor (CON, CAP, XPT, etc).
  • Display Mode 2 - will show the Color Code.
  • Display Mode 3 - will show the slot.


Can You Program a frequency on the 325P2 or 996P2 to show DMR information?
  • Yes. When you program it, press Hold and set the mode to Digital`
  • Press Func + 6. There are 3 modes; Mode 1 shows NXDN or DMR, Mode 2 shows CC or RAN, Mode 3 shows slot or UID


Can the 325P2 and 996P2 search for a NAC (P25), Color Code (DMR), RAN or Area (NXDN)?
  • Yes. Go to Srch/CloCall Opt, then Tone/Code Search, then NAC/CC/RAN/Area.


Can you program the P2 scanners to run in Search mode if there are no talkgroups listed?
  • Yes, but you must enter one dummy talkgroup as a placeholder.


Does Close Call work on a DMR channel?
  • It will work on the base station or repeater since there's a continuous carrier, but it won't work on subscriber units which transmit in 30ms bursts

Random Tips

Programming with Software

  • FreeScan does not support programming DMR / MOTOTRBO. Use ProScan or ARC-XT for this


System Types

DMR Conventional

  • If you wish to scan a DMR Conventional channel that says 'TG 16777215 (ALL TG)' in the database, program it as a conventional frequency. That will increase scan speed and will still allow you to hear everything on that channel.

Thanks Joe Bearcat


Capacity Types and Connect Plus Systems

If the system is in the database as a MOTOTRBO Capacity Max or Connect Plus system, where can I find the color code, LCN and LSN?
Site Frequency Table
  1. Go to the database listing
  2. Click on a site name under Name
  3. On the next form, go all the way to the bottom and look on the left for the Site Frequency Table. An example is shown on the right


Hytera Systems

How Can I find the correct LCN to use in Uniden scanners for a Hytera System?
Site Frequency Table
  1. If it's in the database, go to the frequency listing
  2. Click on a site name under Name
  3. On the next form, go all the way to the bottom and look on the left for the Site Frequency Table. An example is shown on the right
  4. Take the channel number, reduce it by 1 and divide the result by 2. This will be the LCN that Uniden scanners will recognize

Tier III (Trunking) Systems

Is there a way to calculate the frequency from the LCN in a Tier III system?


Retrieved from "https://wiki.radioreference.com/index.php?title=Programming_the_P2_Scanners_for_DMR_/_MOTOTRBO&oldid=328006"