Actions

Difference between revisions of "SR30C"

From The RadioReference Wiki

 
(2 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
[[Image:SR30C.jpg|right|150px|SR30C-Click to view full size]]
 
[[Image:SR30C.jpg|right|150px|SR30C-Click to view full size]]
  
==Physical and Tech Specifications==
+
==Specifications==
 +
===Physical===
 
* 500 Channels, 10 banks
 
* 500 Channels, 10 banks
 +
*Display Backlight - You can turn on/off the LCD backlight.
  
;Frequency Coverage
+
===Technical===
 +
*10 Channel Storage Banks - You can store up to 50 frequencies into each bank for a total of 500 frequencies so you can more easily identify calls.
 +
*Flexible Antenna with BNC Connector - provides adequate reception in strong signal areas and is designed to help prevent antenna breakage. Or you can connect an external antenna for better reception.
 +
*Memory Backup - keeps the frequencies stored in memory for an extended time if the scanner loses power.
 +
*PC Programming - you can download information into the scanner and control the scanner via your personal computer.
 +
*Triple-Conversion Circuitry - virtually eliminates any interference from IF (intermediate frequency) images, so you hear only the selected frequency.
 +
 
 +
====Frequency Coverage====
 
*25-54 MHz
 
*25-54 MHz
 
*108-174 MHz
 
*108-174 MHz
 
*406-512 MHz
 
*406-512 MHz
  
*'''10 Channel Storage Banks''' - You can store up to 50 frequencies into each bank for a total of 500 frequencies so you can more easily identify calls.
+
====Power====
 
+
*Built-In Charger - allows you to charge Ni-MH batteries in the scanner using a USB port on any computer and the supplied USB cable.
*'''PC Programming''' - you can download information into the scanner and control the scanner via your personal computer.
+
*Two Power Options - let you power the scanner using the included two AA rechargeable or alkaline batteries or ''the supplied USB cable''.
 
 
*'''Triple-Conversion Circuitry''' - virtually eliminates any interference from IF (intermediate frequency) images, so you hear only the selected frequency.
 
 
 
*'''Display Backlight''' - You can turn on/off the LCD backlight.
 
 
 
*'''Flexible Antenna with BNC Connector''' - provides adequate reception in strong signal areas and is designed to help prevent antenna breakage. Or you can connect an external antenna for better reception.
 
 
 
*'''Memory Backup''' - keeps the frequencies stored in memory for an extended time if the scanner loses power.
 
 
 
*'''Two Power Options''' - let you power the scanner using the included two AA rechargeable or alkaline batteries or ''the supplied USB cable''.
 
 
 
*'''Built-In Charger''' - allows you to charge Ni-MH batteries in the scanner using a USB port on any computer and the supplied USB cable.
 
 
 
  
 
==Features==
 
==Features==
*'''[[Battery Saver]]''' - works when there is no transmission for 1 minute in Scan Hold Mode and any Search Hold Mode (without Priority Scan). This feature turns off RF power for 1 second and turns on it for 300ms to extend the battery life.
+
*[[Battery Saver]] - works when there is no transmission for 1 minute in Scan Hold Mode and any Search Hold Mode (without Priority Scan). This feature turns off RF power for 1 second and turns on it for 300ms to extend the battery life.
 
+
*Battery Low Alert - the icon will blink in the display and a tone warns you every 15 seconds when the battery power gets low.
*'''Battery Low Alert''' - the icon will blink in the display and a tone warns you every 15 seconds when the battery power gets low.
+
*[[Uniden Close Call|Close Call]] RF Capture Technology - you can set the scanner so it detects and provides information about nearby radio transmissions
 
+
*[[Uniden Close Call|Close Call]] Do-Not-Disturb - checks for Close Call activity in between channel reception so active channels are not interrupted.
*'''[[Uniden Close Call|Close Call]] RF Capture Technology''' - you can set the scanner so it detects and provides information about nearby radio transmissions
+
*[[Uniden Close Call|Close Call]] Temporary Store - temporarily stores and scans the last 10 Close Call hits in the 'Close Call Hits' system.
 
+
*Custom Search - lets you program up to 10 Custom Search Ranges and search any or all of these ranges.
*'''[[Uniden Close Call|Close Call]] Do-Not-Disturb''' - checks for Close Call activity in between channel reception so active channels are not interrupted.
+
*Direct Access - lets you directly access any channel.
 
+
*[[Key Lock]] - lets you lock the scanner's keys to help prevent accidental changes to the scanner's programming.
*'''[[Uniden Close Call|Close Call]] Temporary Store''' - temporarily stores and scans the last 10 Close Call hits in the 'Close Call Hits' system.
+
*Lock-Out Function - lets you set your scanner to skip over specified channels or frequencies when scanning or searching.
 
+
*[[Priority Scan]]  
*'''Custom Search''' - lets you program up to 10 Custom Search Ranges and search any or all of these ranges.
+
*[[Quick Search]] - allows you to enter a frequency and start searching up or down from that frequency.
 
+
*Scan/Search Delay/Resume - controls whether the scanner pauses at the end of the transmission to wait for a reply.
*'''Direct Access''' - lets you directly access any channel.
+
*Search Lockouts - you can lock up to 200 search frequencies: 100 temporary frequencies and 100 permanent frequencies in Custom Search, Service Search, Close Call Search, or Quick Search Modes.
 
+
*Service Banks - frequencies are preset in 10 separate Police, Fire/Emergency, Ham, Marine, Railroad, Civil Air, CB Radio to make it easy to locate specific types of calls and search any or all of these banks.
*'''[[Key Lock]]''' - lets you lock the scanner's keys to help prevent accidental changes to the scanner's programming.
+
*Temporary Lockout - makes it easy to temporarily lock out any channel or frequency. The lockout is cleared when you turn power off, then back on so you don’t have to remember to unlock the channels later.
 
+
*Turbo Search - increases the search speed from 100 to 300 steps per second automatically for bands ''with 5 kHz steps''.
*'''Lock-Out Function''' - lets you set your scanner to skip over specified channels or frequencies when scanning or searching.
 
 
 
*'''[[Priority Scan]] with Do Not Disturb''' - lets you program one channel in each bank (10 in all) and then have the scanner check each channel every 2 seconds while it scans the banks so you don’t miss transmissions on those channels. Do-Not Disturb keeps the scanner from interrupting transmissions during receiving.
 
 
 
*'''[[Priority Scan|Priority Plus Scan]]''' - you can set the scanner so it scans only the priority channels.
 
 
 
*'''Quick Search''' - allows you to enter a frequency and start searching up or down from that frequency.
 
 
 
*'''Scan/Search Delay/Resume''' - controls whether the scanner pauses at the end of the transmission to wait for a reply.
 
 
 
*'''Search Lockouts''' - you can lock up to 200 search frequencies: 100 temporary frequencies and 100 permanent frequencies in Custom Search, Service Search, Close Call Search, or Quick Search Modes.
 
 
 
*'''Service Banks''' - frequencies are preset in 10 separate Police, Fire/Emergency, Ham, Marine, Railroad, Civil Air, CB Radio to make it easy to locate specific types of calls and search any or all of these banks.
 
 
 
*'''Temporary Lockout''' - makes it easy to temporarily lock out any channel or frequency. The lockout is cleared when you turn power off, then back on so you don’t have to remember to unlock the channels later.
 
 
 
*'''Turbo Search''' - increases the search speed from 100 to 300 steps per second automatically for bands ''with 5 kHz steps''.
 
 
 
  
 
==Owner's Manual==
 
==Owner's Manual==
 
*[http://www.uniden.info/download/ompdf/SR30Com.pdf Owners Manual]
 
*[http://www.uniden.info/download/ompdf/SR30Com.pdf Owners Manual]
 
==Firmware Updates==
 
* no updates available
 
  
 
==Related Pages==
 
==Related Pages==
*{{Forum|uniden-forums|RadioReference Uniden}}
+
*{{Forum|uniden-forums.82|RadioReference Uniden}}
 
 
==Reviews, etc==
 
 
 
  
 
==Supporting Software==
 
==Supporting Software==

Latest revision as of 08:47, 10 May 2021

SR30C-Click to view full size

Specifications

Physical

  • 500 Channels, 10 banks
  • Display Backlight - You can turn on/off the LCD backlight.

Technical

  • 10 Channel Storage Banks - You can store up to 50 frequencies into each bank for a total of 500 frequencies so you can more easily identify calls.
  • Flexible Antenna with BNC Connector - provides adequate reception in strong signal areas and is designed to help prevent antenna breakage. Or you can connect an external antenna for better reception.
  • Memory Backup - keeps the frequencies stored in memory for an extended time if the scanner loses power.
  • PC Programming - you can download information into the scanner and control the scanner via your personal computer.
  • Triple-Conversion Circuitry - virtually eliminates any interference from IF (intermediate frequency) images, so you hear only the selected frequency.

Frequency Coverage

  • 25-54 MHz
  • 108-174 MHz
  • 406-512 MHz

Power

  • Built-In Charger - allows you to charge Ni-MH batteries in the scanner using a USB port on any computer and the supplied USB cable.
  • Two Power Options - let you power the scanner using the included two AA rechargeable or alkaline batteries or the supplied USB cable.

Features

  • Battery Saver - works when there is no transmission for 1 minute in Scan Hold Mode and any Search Hold Mode (without Priority Scan). This feature turns off RF power for 1 second and turns on it for 300ms to extend the battery life.
  • Battery Low Alert - the icon will blink in the display and a tone warns you every 15 seconds when the battery power gets low.
  • Close Call RF Capture Technology - you can set the scanner so it detects and provides information about nearby radio transmissions
  • Close Call Do-Not-Disturb - checks for Close Call activity in between channel reception so active channels are not interrupted.
  • Close Call Temporary Store - temporarily stores and scans the last 10 Close Call hits in the 'Close Call Hits' system.
  • Custom Search - lets you program up to 10 Custom Search Ranges and search any or all of these ranges.
  • Direct Access - lets you directly access any channel.
  • Key Lock - lets you lock the scanner's keys to help prevent accidental changes to the scanner's programming.
  • Lock-Out Function - lets you set your scanner to skip over specified channels or frequencies when scanning or searching.
  • Priority Scan
  • Quick Search - allows you to enter a frequency and start searching up or down from that frequency.
  • Scan/Search Delay/Resume - controls whether the scanner pauses at the end of the transmission to wait for a reply.
  • Search Lockouts - you can lock up to 200 search frequencies: 100 temporary frequencies and 100 permanent frequencies in Custom Search, Service Search, Close Call Search, or Quick Search Modes.
  • Service Banks - frequencies are preset in 10 separate Police, Fire/Emergency, Ham, Marine, Railroad, Civil Air, CB Radio to make it easy to locate specific types of calls and search any or all of these banks.
  • Temporary Lockout - makes it easy to temporarily lock out any channel or frequency. The lockout is cleared when you turn power off, then back on so you don’t have to remember to unlock the channels later.
  • Turbo Search - increases the search speed from 100 to 300 steps per second automatically for bands with 5 kHz steps.

Owner's Manual

Related Pages

Supporting Software

ARC75

Mailing Lists/Forums

Facebook
Groups.io

Return to Uniden Scanners