View source for Windows 10 installation of GRE PSR-800 Software and Driver

'''Note:''' For other PC Driven scanners, please see the [[Connection Issues Under Win 10.x Using the WS-1080 / 1095]] article


==Preparation==
;Windows 10 update from 1511 to 1607
#EZScan needs to be uninstalled
#EZ Scan folder removed in "My Documents" ''(probably better to rename it since this is where all your settings, scanlists and programming are stored)''
#Reboot

==Procedure==
This procedure requires administrator privileges and connection to the Internet


#Download EZScanDGInstall_v1.08 from the greamerica.com web site, save it in a folder (e.g. named GRECOM) and unzip it in that folder. EZScanDGInstall_v1.08.exe will be created.
#Instruct Windows to boot into the "Options" menu. Either click on the "Power" button, hold down the "Shift" key while clicking "Restart or Run: shutdown.exe /r /o /f /t 00
#After rebooting into the “Options Menu”, click “Troubleshoot” and then “Advanced options”.
#On the next page, select "Advanced Options".
#Select the "Startup Settings" to change the behavior of Windows Startup and then click restart or reboot on the next page.
#A menu with 9 selections will appear. Select number 7 or F7 to "Disable Driver Signature enforcement".
#Windows 10 will restart.
#Install the EZScan software by running the downloaded and unzipped EZScanDGInstall_v1.08.exe .
#Run the installed software and update it from inside to 1.9 Bld 301.
#Connect your PSR-800 scanner to the computer. Wait for the default driver installation, which is completed when a file explorer window with the scanner SD card contents pops up.
#Now correct the scanner driver. In the Device Manager, find the extra USB Communications Port assigned to the scanner under "Ports (COM&LPT)".
#Update the driver with this special procedure:
##"Driver" tab
##"Update Driver"
##"Browse my computer for driver software"
##"Let me pick from a list of device drivers on my computer"
##"GRECOM PSR-800 Serial Device"
##"Next".
#If "GRECOM PSR-800 Serial Device" is not shown then go back one screen and select "Browse for driver software on your computer", type this file path: C:\Windows\Inf\GRECOM_PSR-800.inf and click on "Next".
#If a warning screen about the risk of unsigned drivers appears, select the unsigned driver option because the PSR-800 driver is unsigned.
#Repeat the PSR-800 driver installation steps 10 - 14 for each physical USB port on your computer.
#You can verify the driver installation by checking in the device manager that now your scanner shows up under "Ports (COM&LPT)" as "GRECOM PSR-800 Serial Device".


These instructions come from this {{Thread|gre-scanners|339979-windows-10-psr-800-a.html|thread|}} 


[[Category:GRE Scanners]]
[[Category:Handheld Scanners]]
[[Category:Mobile Scanners]]
[[Category:Digital Scanners without DMR]]
[[Category:Digital Scanners without MOTOTRBO]]
[[Category:Digital Scanners without NXDN]]
[[Category:Digital Scanners without ProVoice]]
[[Category:Object Oriented Scanners]]
[[Category:Rebanding Supported Scanners]]