Control Channel Data Output
From The RadioReference Wiki
- XT Models: Settings > Set C - Ch output.
- P2 Models: Same as XT Models
- HomePatrol 1 and 2: Extreme update required See the Raw Data Output section in the Easier to Read guide.
Control Channel Data Output allows the analysis of control channel data without the need to perform invasive modifications to the scanner
See our Trunked Radio Decoders article for links to various decoders.
See our Voice Control Channel Decoding Software Forum for support with many of these decoders
CAUTION: This function will prevent the scanner from connecting to any control programs such as Butel, ProScan, etc. Make sure this function is off before using these programs or the connection will fail.