Motorola Type I
From The RadioReference Wiki
Motorola Type I refers to the original Motorola systems that were based on Fleets and Subfleets. Each system had a certain number of Fleets assigned, and then each Fleet had a certain number of Subfleets and radio IDs. The distribution of Fleets and Subfleets on a Type I system is determined by the system Fleetmap. Motorola Type I systems are not scalable because they limit the amount of IDs any fleet or subfleet can support. Each Type I ID appears as a three or four digit number, followed by a hyphen, followed by a one or two digit number (example 200-14).
The term "Privacy Plus" refers to a Type I system. Privacy Plus systems are normally older public safety systems and SMRs. You can read about how to determine older fleet and size codes here
Type 1 Block Size Codes
Motorola | A | B | C | D | E | F | G | H | I | J | K | M | O | Q |
Trunktracker | S1 | S2 | S3 | S4 | S5 | S6 | S7 | S8 | S9 | S10 | S11 | S12 | S13 | S14 |
Trunker.exe | A | B | C | D | E | F | G | H | I | J | K | L | M | N |
Size Code Parameters
Motorola | TT | Trunker.exe | Fleets | Subfleets | Ids |
A | S1 | A | 128 | 4 | 16 |
B | S2 | B | 16 | 8 | 64 |
C | S3 | C | 8 | 8 | 128 |
D | S4 | D | 1 | 16 | 512 |
E | S5 | E | 64 | 4 | 32 |
F | S6 | F | 32 | 8 | 32 |
G | S7 | G | 32 | 4 | 64 |
H | S8 | H | 16 | 4 | 128 |
I | S9 | I | 8 | 4 | 256 |
J | S10 | J | 4 | 8 | 256 |
K | S11 | K | 2 | 16 | 256 |
M | S12 | L | 1 | 16 | 1024 |
O | S13 | M | 1 | 16 | 2048 |
Q | S14 | N | 1 | 16 | 4096 |