Difference between revisions of "Programming the P2 Scanners for DMR / MOTOTRBO"
From The RadioReference Wiki
Line 1: | Line 1: | ||
Please document any tips and tricks for programming [[DMR]] and [[MOTOTRBO]] systems, manually or with ProScan or ARC-XT, here | Please document any tips and tricks for programming [[DMR]] and [[MOTOTRBO]] systems, manually or with ProScan or ARC-XT, here | ||
+ | |||
+ | |||
+ | '''Required:''' The following firmware versions are required to copy DMR / MOTOTRBO / NXDN. These are paid upgrades and applied (using the front port on the BCD996P2) using BC VUP3 | ||
+ | * You can check your firmware version by selecting ''MENU --> Settings --> See Scanner Info'' | ||
+ | * [http://info.uniden.com/twiki/bin/view/UnidenMan4/InstallingBC_VUP Install BC VUP3.03] | ||
+ | * [http://info.uniden.com/twiki/bin/view/UnidenMan4/UsingBC_VUP Using the BC VUP Firmware Updater (3.03)] | ||
+ | * BCD996P2: 1.08.01 | ||
+ | * BCD325P2: 1.08.01 | ||
Revision as of 01:52, 5 July 2021
Please document any tips and tricks for programming DMR and MOTOTRBO systems, manually or with ProScan or ARC-XT, here
Required: The following firmware versions are required to copy DMR / MOTOTRBO / NXDN. These are paid upgrades and applied (using the front port on the BCD996P2) using BC VUP3
- You can check your firmware version by selecting MENU --> Settings --> See Scanner Info
- Install BC VUP3.03
- Using the BC VUP Firmware Updater (3.03)
- BCD996P2: 1.08.01
- BCD325P2: 1.08.01
- Is there a way to calculate the frequency from the LCN in a Tier III system?
- Yes, see the LCN to Frequency Calculator for Tier III Thread
- Note: This will also work with other DMR types that have a defined bandplan
- How Can I find the correct LCN to use in Uniden scanners for a Tier III System?
- If it's in the database, go to the frequency listing
- Click on a name under Name
- On the next form, go all the way to the bottom and look on the left for the Site Frequency Table. An example is shown on the right
- Take the channel number, reduce it by 1 and divide the result by 2. This will be the LCN that Uniden scanners will recognize
- Since the P2 scanners don't have the Analyze or LCN Finder functions, how can you use them to research and hear DMR MOTOTRBO?
- You can use the Control Channel Data Output function to feed audio to utilities like DSD Plus
- See our Trunked Radio Decoders page for links to decoding software
- See this How to set up DSD Fastlane for DMR Tier III frequencies, talkgroups and networks Thread
---
- Return to Program your DMA Scanner