UBC800XLT
From The RadioReference Wiki
Uniden's Base/Mobile Trunktracker scanner with Dynamic Memory Architecture and GPS Support for European markets.
Contents
General Specifications
Limits
- Channels: 6,000 maximum
- Systems: 500 maximum
- Sites: 1000 maximum, 256 maximum per system
- Groups per system: 20 maximum
- Talkgroups per trunked system: 250 maximum
- Channels per conventional system: 1000 maximum
- Scan Rate: 100 channels per second (conventional mode)
- Search Rate: 300 steps per second (on 5 kHz steps)
- System Quick Key range: 0-99
- Group Quick Key range: 0-9
- Custom Search Ranges: 10
- Startup Keys: 10
- Preprogrammed Service Search Bands: 6
Frequency Coverage
- 25 - 512 MHz
- 806 - 960 MHz
- 1240 - 1300 MHz
Power
- Voltage: 13.8 Volts DC
- Current: less than 750mA (max. rating of included wall wart)
- Power plug: 5.5mm outer diameter, 2.1mm inner diameter; Radio Shack size code "M"
Features
- Rebanding supported? No (only vhf/uhf allow editing band plan)
- Dynamic Memory Architecture
- TrunkTracker III with Motorola Control Channel Only trunking and I-Call monitoring
- Multi-Site support
- Trunking Activity Indicators
- Uniden Close Call, with Close Call Do Not Disturb, Close Call Priority (or Primary), and Close Call Temporary Store.
- GPS Support for Location Based Scanning with independent control of Systems and Sites
- Dangerous Crossing/Road and POI alerts
- 100 Quick Keys
- Adjustable (0-5 sec) scan delay
- Data Skip
- Supported step sizes: 5, 6.25, 8.33, 10, 12.5,15, 20, 25, 50 or 100 kHz
- 3 selectable but not definable bandplans
- DCS/CTCSS Rapid Decode
- Temporary System, Site, Group, Channel, and Location Lockout
- 500 (250 Temporary + 250 Permanent) Search Lockouts
- Startup Configuration
- Frequency/ID AutoStore - automatically store frequencies from a service or limit search into a conventional system or store talk group IDs into a trunked system
- 16 character text tagging for each system, site, group, channel, talkgroup, search range, location, and Tone-out
- Compatible with BC-RH96 Remote Head
- AGC
- Quick Search
- Search with Scan for Service and Custom Searches with assigned Quick Keys
- 6 Service Searches - Air, Marine, CB AM Radio, CB FM Radio, PMR, and LPD
- Custom Search — lets you program up to 10 search ranges
- 6 Quick-Access Search Keys
- Fire Tone Out alert
- Also see the Fire Tone Out article
- Channel Alert
- Independent Alert Tone Volume – lets you set the volume level of the following tones: Key Beep, Emergency Alert, Channel Alert, and Close Call Alert.
- Duplicate Channel Alert
- Repeater Reverse ?
- Priority Scan with Priority Plus
- Also see the Priority Scan article
- Signal Strength display
- LCD and Keypad Backlight
- Reversible Display - Lets you reverse the display to mount unit upside down (and hear the speaker from the top)
- Adjustable Hold (scan duration 0-255 sec) per system, custom or service search
- Strong signal attenuation
- Broadcast Screen - ignore hits on 10 custom frequency ranges during Close Call or search operation.
- PC Programming and Control
- Record Out - you can connect an output jack to a VOX controlled recorder or PC sound input to record the received audio
- Wired Cloning (Will only Clone to another UBC800XLT)
- DIN-E and ISO Vehicle Mountable sleeve (optional)
- Antenna Connector: BNC- push on telescoping whip
- Accessories included: Mounting bracket, 230 Volt Adaptor (EURO plug), RS232 cable, three-wire DC power cord, cigarette lighter adapter, and ARC800Lite software Cdrom
Available Accessories:
- Uniden USB1 cable
- Uniden USB1S cable
Manual
- GPS800 GPS receiver kit
- ARC800 Basic software CDrom
- ARC800 Pro software CDrom
Related Pages
- Wiki Articles
- Uniden DMA FAQ
- DMA Radios Hints and Kinks
- Programming an UHF system requires at least 1 base frequency and offset.
Supporting Software
- Windows OS
- Please see our Uniden DMA Software Support article for software links
- UniTrunker trunking decoder (as of 1.0.0.10)
- Trunk88 Motorola trunking decoder
External Links
Return to Uniden Scanners