Difference between revisions of "Control Channel Data Output"
From The RadioReference Wiki
m |
|||
Line 1: | Line 1: | ||
− | Available in: [[BC346XT]], [[BCD396XT]], [[BCT15X]], [[BCD996XT]], [[HomePatrol-1]], [[HomePatrol-2]] | + | Available in: [[BC346XT]], [[BCD396XT]], [[BCT15X]], [[BCD996XT]], [[HomePatrol-1]], [[HomePatrol-2]], [[BCD996P2]], [[BCD325P2]] |
Access: | Access: | ||
*XT Models: Settings > Set C - Ch output. | *XT Models: Settings > Set C - Ch output. | ||
+ | *P2 Models: Same as XT Models | ||
*HomePatrol 1 and 2: ''Extreme update required'' See the [http://new.marksscanners.com/HP/HP.shtml#raw%20data Raw Data Output] section in the Easier to Read guide. | *HomePatrol 1 and 2: ''Extreme update required'' See the [http://new.marksscanners.com/HP/HP.shtml#raw%20data Raw Data Output] section in the Easier to Read guide. | ||
------ | ------ |
Revision as of 23:27, 28 April 2021
Available in: BC346XT, BCD396XT, BCT15X, BCD996XT, HomePatrol-1, HomePatrol-2, BCD996P2, BCD325P2
Access:
- XT Models: Settings > Set C - Ch output.
- P2 Models: Same as XT Models
- HomePatrol 1 and 2: Extreme update required See the Raw Data Output section in the Easier to Read guide.
Control Channel Data Output allows the analysis of control channel data without the need to perform invasive modifications to the scanner
See our Trunked Radio Decoders article for links to various decoders.
CAUTION: This function will prevent the scanner from connecting to any control programs such as Butel, ProScan, etc. Make sure this function is off before using these programs or the connection will fail.