Actions

Difference between revisions of "Programming the P2 Scanners for DMR / MOTOTRBO"

From The RadioReference Wiki
Line 23: Line 23:
 
* Yes, see the {{Thread|voice-control-channel-decoding-software.26|395387-lcn-to-frequency-calculator-for-dmr-tiii.html|LCN to Frequency Calculator for Tier III}}
 
* Yes, see the {{Thread|voice-control-channel-decoding-software.26|395387-lcn-to-frequency-calculator-for-dmr-tiii.html|LCN to Frequency Calculator for Tier III}}
 
**Note:  This will also work with other DMR types that have a defined bandplan
 
**Note:  This will also work with other DMR types that have a defined bandplan
 +
 +
 +
;If the system is in the database as a Capacity Max or Connect Plus system, where can I find the color code, LCN and LSN?
 +
[[Image:Site Freq Table CapMax.jpg|Site Frequency Table|right]]
 +
# Go to the database listing
 +
# Click on a site name under '''Name'''
 +
# On the next form, go all the way to the bottom and look on the left for the '''Site Frequency Table'''. An example is shown on the right
  
  
Line 28: Line 35:
 
[[Image:Site Frequency Table.jpg|Site Frequency Table|right]]
 
[[Image:Site Frequency Table.jpg|Site Frequency Table|right]]
 
# If it's in the database, go to the frequency listing
 
# If it's in the database, go to the frequency listing
−
# Click on a name under '''Name'''
+
# Click on a site name under '''Name'''
 
# On the next form, go all the way to the bottom and look on the left for the '''Site Frequency Table'''. An example is shown on the right
 
# On the next form, go all the way to the bottom and look on the left for the '''Site Frequency Table'''. An example is shown on the right
 
# Take the channel number, reduce it by 1 and divide the result by 2. This will be the LCN that Uniden scanners will recognize
 
# Take the channel number, reduce it by 1 and divide the result by 2. This will be the LCN that Uniden scanners will recognize

Revision as of 16:07, 5 July 2021

Please document any tips and tricks for programming DMR and MOTOTRBO systems, manually or with ProScan or ARC-XT, here


Required: The following firmware versions are required to copy DMR / MOTOTRBO / NXDN. These are paid upgrades and applied (using the front port on the BCD996P2) using BC VUP3


Why won't my scanner receive DMR on Slot 1 and or Slot 2
  • Try reversing Slot numbers compared to System's Slot numbering.


On DMR I can't see the Flavor Type, Color Code or Slot
  • Display Mode 1 - will show the flavor (CON, CAP, XPT, etc).
  • Display Mode 2 - will show the Color Code.
  • Display Mode 3 - will show the slot.


Is there a way to calculate the frequency from the LCN in a Tier III system?


If the system is in the database as a Capacity Max or Connect Plus system, where can I find the color code, LCN and LSN?
Site Frequency Table
  1. Go to the database listing
  2. Click on a site name under Name
  3. On the next form, go all the way to the bottom and look on the left for the Site Frequency Table. An example is shown on the right


How Can I find the correct LCN to use in Uniden scanners for a Tier III System?
Site Frequency Table
  1. If it's in the database, go to the frequency listing
  2. Click on a site name under Name
  3. On the next form, go all the way to the bottom and look on the left for the Site Frequency Table. An example is shown on the right
  4. Take the channel number, reduce it by 1 and divide the result by 2. This will be the LCN that Uniden scanners will recognize


Since the P2 scanners don't have the Analyze or LCN Finder functions, how can you use them to research and hear DMR MOTOTRBO?


---

Retrieved from "https://wiki.radioreference.com/index.php?title=Programming_the_P2_Scanners_for_DMR_/_MOTOTRBO&oldid=287789"