Difference between revisions of "Programming the P2 Scanners for NXDN"
From The RadioReference Wiki
(Created page with "Please document any tips and tricks for programming NXDN systems, manually or with ProScan or ARC-XT, here '''Required:''' The following firmware versions are required t...") |
|||
| Line 2: | Line 2: | ||
| + | ==Check Your Firmware Version== | ||
'''Required:''' The following firmware versions are required to copy NXDN. These are paid upgrades and applied (using the front port on the BCD996P2) using BC VUP3 | '''Required:''' The following firmware versions are required to copy NXDN. These are paid upgrades and applied (using the front port on the BCD996P2) using BC VUP3 | ||
* You can check your firmware version by selecting ''MENU --> Settings --> See Scanner Info'' | * You can check your firmware version by selecting ''MENU --> Settings --> See Scanner Info'' | ||
Revision as of 20:16, 12 August 2021
Please document any tips and tricks for programming NXDN systems, manually or with ProScan or ARC-XT, here
Check Your Firmware Version
Required: The following firmware versions are required to copy NXDN. These are paid upgrades and applied (using the front port on the BCD996P2) using BC VUP3
- You can check your firmware version by selecting MENU --> Settings --> See Scanner Info
- Install BC VUP3.03
- Using the BC VUP Firmware Updater (3.03)
- BCD996P2: 1.08.01 or later
- BCD325P2: 1.08.01 or later
General / How Tos
- Can You Program a frequency on the 325P2 or 996P2 to show NXDN information?
- Yes. When you program it, press Hold and set the mode to Digital`
- Press Func + 6. There are 3 modes; Mode 1 shows NXDN or DMR, Mode 2 shows CC or RAN, Mode 3 shows slot or UID
- Can the 325P2 and 996P2 search for a NAC (P25), Color Code (DMR), RAN or Area (NXDN)?
- Yes. Go to Srch/CloCall Opt, then Tone/Code Search, then NAC/CC/RAN/Area.
---
- Return to Program your DMA Scanner