Difference between revisions of "Programming the P2 Scanners for NXDN"
From The RadioReference Wiki
| Line 7: | Line 7: | ||
* [http://info.uniden.com/twiki/bin/view/UnidenMan4/InstallingBC_VUP Install BC VUP3.03] | * [http://info.uniden.com/twiki/bin/view/UnidenMan4/InstallingBC_VUP Install BC VUP3.03] | ||
* [http://info.uniden.com/twiki/bin/view/UnidenMan4/UsingBC_VUP Using the BC VUP Firmware Updater (3.03)] | * [http://info.uniden.com/twiki/bin/view/UnidenMan4/UsingBC_VUP Using the BC VUP Firmware Updater (3.03)] | ||
| − | * BCD996P2: 1. | + | * BCD996P2: current version: 1.09.12 |
| − | * BCD325P2: 1.08.01 | + | * BCD325P2: current version: 1.08.01 |
| − | |||
==General / How Tos== | ==General / How Tos== | ||
Revision as of 07:51, 13 August 2021
Please document any tips and tricks for programming NXDN systems, manually or with ProScan or ARC-XT, here
Check Your Firmware Version
Required: The following firmware versions are required to copy NXDN. These are paid upgrades and applied (using the front port on the BCD996P2) using BC VUP3
- You can check your firmware version by selecting MENU --> Settings --> See Scanner Info
- Install BC VUP3.03
- Using the BC VUP Firmware Updater (3.03)
- BCD996P2: current version: 1.09.12
- BCD325P2: current version: 1.08.01
General / How Tos
- Can You Program a frequency on the 325P2 or 996P2 to show NXDN information?
- Yes. When you program it, press Hold and set the mode to Digital`
- Press Func + 6. There are 3 modes; Mode 1 shows NXDN or DMR, Mode 2 shows CC or RAN, Mode 3 shows slot or UID
- Can the 325P2 and 996P2 search for a NAC (P25), Color Code (DMR), RAN or Area (NXDN)?
- Yes. Go to Srch/CloCall Opt, then Tone/Code Search, then NAC/CC/RAN/Area.
---
- Return to Program your DMA Scanner