Programming the P2 Scanners for NXDN

Please document any tips and tricks for programming NXDN systems, manually or with ProScan or ARC-XT, here

Check Your Firmware Version

Required: The following firmware versions are required to copy NXDN. These are paid upgrades and applied (using the front port on the BCD996P2) using BC VUP3

• You can check your firmware version by selecting MENU --> Settings --> See Scanner Info
• Install BC VUP3.03
• Using the BC VUP Firmware Updater (3.03)
• BCD996P2: 1.08.01 or later
• BCD325P2: 1.08.01 or later

General / How Tos

Can You Program a frequency on the 325P2 or 996P2 to show NXDN information?

• Yes. When you program it, press Hold and set the mode to Digital`
• Press Func + 6. There are 3 modes; Mode 1 shows NXDN or DMR, Mode 2 shows CC or RAN, Mode 3 shows slot or UID

Can the 325P2 and 996P2 search for a NAC (P25), Color Code (DMR), RAN or Area (NXDN)?

• Yes. Go to Srch/CloCall Opt, then Tone/Code Search, then NAC/CC/RAN/Area.

---

• Return to Program your DMA Scanner