WS1010
From The RadioReference Wiki
(Redirected from WS1010)
The WS1010 is manufactured by The Whistler Group. The WS1010 is operationally the same as the former GRE PSR-100 and very similar in operation to the current WS1025 and former GRE PSR-200 desktop models and uses the same software and cables.
General Specifications
- Bands Received
- 29–54 MHz VHF Lo
- 108–136.99166 MHz Aircraft
- 137–174 MHz VHF Hi
- 380–512 UHF Bands
- 200 Channels with 10 channel-storage banks
- Conventional scanner (VHF, UHF)
- Scan rate 40cps, Searh rate 75cps
- Spectrum Sweeper (with 10 autostore channels)
- Triple-Conversion Circuitry
- Weather Search
- Weather Alert Indicator
- 1 programmable Skywarn channel
- Two Second Scan Delay
- Lock Out Function
- 200 Search Lockouts
- 1 Priority Channels
- 5 one touch service search banks
- Hypersearch/scan
- Direct Tune
- Key Lock
- Manual Access
- Liquid Crystal Display
- Display Backlight
- Key Backlight
- BNC Antenna connector
- Memory Backup
- Computer interface and Programming with computer control
- Key tones (for correct entry or different tones for errors)
- Battery Save ( a mode to preserve power if no signal appears for 5 seconds)
- 4 AA alkaline or Ni-MH batteries
Supporting Software
- ARC404 software for PSR-100/PSR-200
- PSREdit100
- Please see our Connecting scanners via USB article for cables to connect the scanner via USB
Message Boards/forums
External Links
- Whistler Help Center See the 'Scanner Radios' section
Return to the Whistler Scanners page
This category currently contains no pages or media.