Difference between revisions of "BCD325P2"
From The RadioReference Wiki
m (→In the Box) |
m (→FM Bandwidths) |
||
Line 53: | Line 53: | ||
*'''FMB''': ~75 kHz deviation | *'''FMB''': ~75 kHz deviation | ||
*'''WFM''': >100 kHz deviation | *'''WFM''': >100 kHz deviation | ||
+ | |||
+ | ===Power Requirements=== | ||
+ | *'''Power requirements''': 2 AA batteries(2.05v or higher) or 5V DC ≥300mA or AC adapter 5v ≥300ma. | ||
===RR System Compatibility=== | ===RR System Compatibility=== |
Revision as of 19:01, 5 April 2016
The Uniden BCD325P2 is a APCO-25 Phase II capable handheld "Trunktracker V" scanner with Dynamic Memory Architecture. This scanner became available to the market in April, 2015. It is an upgrade and repackaging of the BCD396XT.
Contents
Specifications
Features
- TrunkTracker V -- Includes APCO P25 Phase I and II, Motorola, EDACS, and LTR
- 25,000 Channels
- Close Call™ RF Capture
- Temporary Lockout
- Location-Based Scanning
- Fire Tone-Out Alert
- Band Scope
- Rapid System/Channel Number Tagging
- DCS/CTCSS Rapid Decoding
- Audio AGC
- S.A.M.E. Weather Alert
- Location Alerts*
- Crows-Flight Navigation*
- Backlit LCD
- Dynamic Memory
- Custom Search
- 16 Character Text Tagging
- Narrowband Reception
- Key-Safe Mode
- IF Exchange
- Preemptive Trunking Priority
- 12 Service Searches: Public Safety, News, Ham Radio, Marine, Railroad, Air, CB Radio, FRS/GMRS, Racing, FM Broadcast and Special (Itinerant)
- Multi-Site System Support
- Channel Volume Offset
- PC Programming and Control (with 3rd party software, not included)
In the Box
- BCD325P2 Radio Scanner
- Batteries (2 AA 2300mah)
- Flexible antenna (BNC)
- USB to USB Mini B cable(Programming/Charging)
- Hand strap
- Owner’s manual
- Belt Clip (Already attached w 2 screws)
Frequency Coverage
- 25.0000 - 512.0000 MHz
- 758.0000 - 823.9875 MHz
- 849.0125 - 868.9875 MHz
- 894.0125 - 960.0000 MHz
- 1240.0000 - 1300.0000 MHz
FM Bandwidths
- NFM: ~7.5 kHz deviation
- FM: ~15 kHz deviation
- FMB: ~75 kHz deviation
- WFM: >100 kHz deviation
Power Requirements
- Power requirements: 2 AA batteries(2.05v or higher) or 5V DC ≥300mA or AC adapter 5v ≥300ma.
RR System Compatibility
This scanner is compatible with the following Trunking System Types and System Voices used in the RadioReference Database, of course you must verify that the scanner will cover the appropriate frequency range:
- System Types:
- Motorola Type I
- Motorola Type II
- Motorola Type IIi Hybrid
- Motorola Type II Smartnet
- Motorola Type II SmartZone
- Motorola Type II SmartZone OmniLink
- Motorola Type II VOC
- EDACS Standard (Wide)
- EDACS Standard Networked
- EDACS Narrowband
- EDACS Narrowband Networked
- EDACS SCAT
- EDACS ESK (not ProVoice)
- LTR Standard
- Project 25 Standard
- System Voices:
- Analog
- Analog and APCO-25 Common Air Interface
- APCO-25 Common Air Interface Exclusive
Related Pages
- External Links
- Uniden BCD325P2 Wiki Page
- The required USB drivers can be found here
- Wiki Articles
Supporting Software
- See the Uniden DMA Software Support article for packages that support programming and virtual control
Message Boards / Groups
- RadioReference
- Yahoo! Groups
Return to Uniden Scanners