Difference between revisions of "Pro-668"
From The RadioReference Wiki
m |
m (→External Links) |
||
Line 68: | Line 68: | ||
==External Links== | ==External Links== | ||
− | *[ | + | *[https://www.radioshack.com/products/radioshack-pro-668-handheld-iscan-digital-trunking-scanner?variant=20332485509 PRO-668 Product Page at RS] |
− | |||
==Wiki Articles== | ==Wiki Articles== |
Revision as of 12:39, 27 October 2016
Contents
General Info
Catalog #: 2000668
Radio Shack branded version of the Whistler WS1080.
(Functionally the same as the former GRE PSR-800 for the most part as well.)
In the box
- Pro-668
- Rubber ducky antenna
- Interface cable
- 2GB microSD card (which also contains the Digital iScan software)
- Belt clip
Error Codes
- Discussion: Pro-668 Error Codes Thread
Error Code | Error Type | Suggested Solution |
---|---|---|
01-00 | General heap error | Provide error code information in Yahoo group or forum |
01-01 | Unable to allocate from heap | Same as above |
02-00 | Unknown object type in data | Use PC Application to delete any corrupted objects or create a new configuration |
02-01 | Unknown TSYS type in data | Use PC Application to delete any corrupted TSYS objects or create a new configuration |
03-00 | No MicroSD Card inserted | Ensure that a properly formatted MicroSD card is fully inserted and locked in the MicroSD slot. |
03-01 | General error initializing file system | Reinsert the MicroSD card to ensure it is fully inserted in locked in the MicroSD slot. If necessary, reformat the MicroSD card using the PC Application “Prepare SD Card for use” option. Replace the MicroSD card if the problem persists. |
03-02 | Cluster size bad | Reinsert the MicroSD card to ensure it is fully inserted in locked in the MicroSD slot. If necessary, reformat the MicroSD card using the PC Application “Prepare SD Card for use” option. Replace the MicroSD card if the problem persists. |
03-03 | Error reading MicroSD card | Reinsert the MicroSD card to ensure it is fully inserted in locked in the MicroSD slot. If necessary, reformat the MicroSD card using the PC Application “Prepare SD Card for use” option. Replace the MicroSD card if the problem persists. |
03-04 | Error writing MicroSD card | Reinsert the MicroSD card to ensure it is fully inserted in locked in the MicroSD slot. If necessary, reformat the MicroSD card using the PC Application “Prepare SD Card for use” option. Replace the MicroSD card if the problem persists. |
03-05 | MicroSD Card is full | Reduce size of configuration, remove unnecessary audio recordings or switch to a MicroSD card with more capacity. |
03-06 | MicroSD Card is write protected | Reinsert the MicroSD card to ensure it is fully inserted in locked in the MicroSD slot. If necessary, reformat the MicroSD card using the PC Application “Prepare SD Card for use” option. Replace the MicroSD card if the problem persists. |
03-07 | Mass storage mode is active | Under normal conditions this error should not appear. Mass storage device mode is disabled when the scanner is connected to a computer and scanning. Disconnect the radio from the computer, wait a few seconds, then reconnect. Contact GRE Support if the problem persists. |
03-08 | Unknown MicroSD card read/write error | Reinsert the MicroSD card to ensure it is fully inserted in locked in the MicroSD slot. If necessary, reformat the MicroSD card using the PC Application “Prepare SD Card for use” option. Replace the MicroSD card if the problem persists. |
04-00 | Initialization error | Provide error code information to Yahoo group or forum |
04-01 | Initialization error | Same as above |
04-02 | Firmware load error | Same as above |
05-00 | Unable to load CONFIG__.BIN | Reformat the MicroSD card using the PC Application “Prepare SD Card for use” option. Replace the MicroSD card if the problem persists. |
05-01 | CONFIG__.BIN file error | Reformat the MicroSD card using the PC Application “Prepare SD Card for use” option. Replace the MicroSD card if the problem persists. |
05-02 | CONFIG__.BIN file error | Reformat the MicroSD card using the PC Application “Prepare SD Card for use” option. Replace the MicroSD card if the problem persists. |
05-03 | CONFIG__.BIN file error | Reformat the MicroSD card using the PC Application “Prepare SD Card for use” option. Replace the MicroSD card if the problem persists. |
FCC / Technical Data
External Links
Wiki Articles
Return to Radio Shack Scanners