Pro-668
From The RadioReference Wiki
Contents
General Info
Catalog #: 2000668
Radio Shack branded version of the Whistler WS1080.
(Functionally the same as the former GRE PSR-800 for the most part as well.)
In the box
- Pro-668
- Rubber ducky antenna
- Interface cable
- 2GB microSD card (which also contains the Digital iScan software)
- Belt clip
Technical Issues
- Do you have Connection Issues Under Win 10.x?
Error Codes
- Discussion: Pro-668 Error Codes Thread
Error Code | Error Type | Suggested Solution |
---|---|---|
01-00 | General heap error | Contact GRE Support and provide error code information |
01-01 | Unable to allocate from heap | Contact GRE Support and provide error code information |
02-00 | Unknown object type in data | Use PC Application to delete any corrupted objects or create a new configuration |
02-01 | Unknown TSYS type in data | Use PC Application to delete any corrupted TSYS objects or create a new configuration |
03-00 | No MicroSD Card inserted | Ensure that a properly formatted MicroSD card is fully inserted and locked in the MicroSD slot. |
03-01 | General error initializing file system | Reinsert the MicroSD card to ensure it is fully inserted in locked in the MicroSD slot. If necessary, reformat the MicroSD card using the PC Application “Prepare SD Card for use” option. Replace the MicroSD card if the problem persists. |
03-02 | Cluster size bad | Reinsert the MicroSD card to ensure it is fully inserted in locked in the MicroSD slot. If necessary, reformat the MicroSD card using the PC Application “Prepare SD Card for use” option. Replace the MicroSD card if the problem persists. |
03-03 | Error reading MicroSD card | Reinsert the MicroSD card to ensure it is fully inserted in locked in the MicroSD slot. If necessary, reformat the MicroSD card using the PC Application “Prepare SD Card for use” option. Replace the MicroSD card if the problem persists. |
03-04 | Error writing MicroSD card | Reinsert the MicroSD card to ensure it is fully inserted in locked in the MicroSD slot. If necessary, reformat the MicroSD card using the PC Application “Prepare SD Card for use” option. Replace the MicroSD card if the problem persists. |
03-05 | MicroSD Card is full | Reduce size of configuration, remove unnecessary audio recordings or switch to a MicroSD card with more capacity. |
03-06 | MicroSD Card is write protected | Reinsert the MicroSD card to ensure it is fully inserted in locked in the MicroSD slot. If necessary, reformat the MicroSD card using the PC Application “Prepare SD Card for use” option. Replace the MicroSD card if the problem persists. |
03-07 | Mass storage mode is active | Under normal conditions this error should not appear. Mass storage device mode is disabled when the scanner is connected to a computer and scanning. Disconnect the radio from the computer, wait a few seconds, then reconnect. Contact GRE Support if the problem persists. |
03-08 | Unknown MicroSD card read/write error | Reinsert the MicroSD card to ensure it is fully inserted in locked in the MicroSD slot. If necessary, reformat the MicroSD card using the PC Application “Prepare SD Card for use” option. Replace the MicroSD card if the problem persists. |
04-00 | Initialization error | Contact GRE Support and provide error code information |
04-01 | Initialization error | Contact GRE Support and provide error code information |
04-02 | Firmware load error | Contact GRE Support and provide error code information |
05-00 | Unable to load CONFIG__.BIN | Reformat the MicroSD card using the PC Application “Prepare SD Card for use” option. Replace the MicroSD card if the problem persists. |
05-01 | CONFIG__.BIN file error | Reformat the MicroSD card using the PC Application “Prepare SD Card for use” option. Replace the MicroSD card if the problem persists. |
05-02 | CONFIG__.BIN file error | Reformat the MicroSD card using the PC Application “Prepare SD Card for use” option. Replace the MicroSD card if the problem persists. |
05-03 | CONFIG__.BIN file error | Reformat the MicroSD card using the PC Application “Prepare SD Card for use” option. Replace the MicroSD card if the problem persists. |
FCC / Technical Data
External Links
Return to Radio Shack Scanners