Difference between revisions of "Dynamic Memory Architecture"
From The RadioReference Wiki
m (updated link to avoid redirect) |
m (updated categories) |
||
Line 93: | Line 93: | ||
Return to the [[Uniden DMA FAQ]] | Return to the [[Uniden DMA FAQ]] | ||
− | [[Category: | + | |
− | [[Category: | + | [[Category:RR Glossary]] |
+ | [[Category:Scanners Glossary]] | ||
+ | [[Category:DMA Radios Hints and Kinks for Uniden Scanners]] |
Revision as of 12:42, 21 January 2016
Dynamic Memory Architecture, or DMA, is Uniden's scheme for storing and organizing systems, sites, groups, channels, and talkgroups in a scanner.
A scanner that implements DMA has a pool of memory to store any programmed data. The pool is divided into blocks.
A System is the top-most element that can be created in DMA. Within each system, a number of Groups can be created. Within each Group, a number of Channels (for a conventional System) or Talkgroups (for a trunked System) can be created.
Some scanners also allow multiple Sites to be programmed for a trunked System.
Each System, Site, Group, Channel, or Talkgroup will occupy one or more blocks.
Each System can be assigned a System Quick Key to easily enable or disable the System to be scanned. If the scanner implements Sites to be programmed for a System, usually each site may be programmed with a Site Quick Key. Likewise, Groups can be assigned a Group Key Quick.
The number of memory blocks varies by scanner. The allowable number of Systems, Groups within a System, and Channels/Talkgroups within a Group also vary by scanner model.
The following Uniden models use Dynamic Memory Architecture.
Model | Analog (AM/FM) | Digital (APCO Project 25) | Trunking |
---|---|---|---|
BCD396T | Yes | Yes | Yes |
BCD396XT | Yes | Yes | Yes |
BR330T | Yes | Yes | |
BC346XT | Yes | Yes | |
BC246T | Yes | Yes | |
SC230 | Yes | ||
BCD996T | Yes | Yes | Yes |
BCD996XT | Yes | Yes | Yes |
BCT15 | Yes | Yes | |
BCT15X | Yes | Yes |
How Can I Get Started?
Your first step begins with an article written by UPMan called Scanner Programming;Man Machine Interface. This article will give you an introduction into how to set up a DMA radio. While the article was written before all the current models were in production, the basic ideas are still the same. A basic description of the architecture can be found here.
How do I Lay Out My Groups and Systems?
As suggested in the above article, the use of a spreadsheet or other columnar layouts will help in getting things organized.
Return to the Uniden DMA FAQ