Actions

Difference between revisions of "Uniden scanner test modes"

From The RadioReference Wiki

Line 1: Line 1:
 +
==Introduction==
 
This page will be used to show the effects of various key combinations that result in previously-undocumented functions. Please document those that are '''not''' found in the owner's guide or the Easier to Read guides
 
This page will be used to show the effects of various key combinations that result in previously-undocumented functions. Please document those that are '''not''' found in the owner's guide or the Easier to Read guides
  
 +
 +
==Before We Begin==
 +
* The usual warnings apply; RR is not responsible if you damage your scanner, use at your own risk, etc.
 +
* Some of these cause the scanner to lock up. If this happens remove the battery / power, put it back in then turn it back on. Make sure your scanner is backed up before you do any of this.
 +
* You can find support to discuss these at the {{Forum|uniden-tech-support.248|Uniden Tech Support}}
 +
 +
 +
==Onward==
 
* [[Uniden Scanner Test Modes for the original DMA scanners]]
 
* [[Uniden Scanner Test Modes for the original DMA scanners]]
 
* [[Uniden Scanner Test Modes for the XT and P2 scanners]]
 
* [[Uniden Scanner Test Modes for the XT and P2 scanners]]

Revision as of 18:35, 28 June 2021

Introduction

This page will be used to show the effects of various key combinations that result in previously-undocumented functions. Please document those that are not found in the owner's guide or the Easier to Read guides


Before We Begin

  • The usual warnings apply; RR is not responsible if you damage your scanner, use at your own risk, etc.
  • Some of these cause the scanner to lock up. If this happens remove the battery / power, put it back in then turn it back on. Make sure your scanner is backed up before you do any of this.
  • You can find support to discuss these at the Uniden Tech Support Forum


Onward



Return to the Uniden DMA FAQ