Actions

Difference between revisions of "Uniden scanner test modes"

From The RadioReference Wiki
Line 5: Line 5:
 
==Before We Begin==  
 
==Before We Begin==  
 
* The usual warnings apply; RR is not responsible if you damage your scanner, use at your own risk, etc.
 
* The usual warnings apply; RR is not responsible if you damage your scanner, use at your own risk, etc.
−
* Some of these cause the scanner to lock up. If this happens remove the battery / power, put it back in then turn it back on. Make sure your scanner is backed up before you do any of this.
+
* Some of these cause the scanner to lock up. If this happens remove the battery / power, put it back in then turn it back on. Make sure your scanner is '''backed up''' using your software of choice before you do any of this.
 
* You can find support to discuss these at the {{Forum|uniden-tech-support.248|Uniden Tech Support}}
 
* You can find support to discuss these at the {{Forum|uniden-tech-support.248|Uniden Tech Support}}
  

Revision as of 18:41, 28 June 2021

Introduction

This page will be used to show the effects of various key combinations that result in previously-undocumented functions. Please document those that are not found in the owner's guide or the Easier to Read guides


Before We Begin

  • The usual warnings apply; RR is not responsible if you damage your scanner, use at your own risk, etc.
  • Some of these cause the scanner to lock up. If this happens remove the battery / power, put it back in then turn it back on. Make sure your scanner is backed up using your software of choice before you do any of this.
  • You can find support to discuss these at the Uniden Tech Support Forum


Onward



Return to the Uniden DMA FAQ

Retrieved from "https://wiki.radioreference.com/index.php?title=Uniden_scanner_test_modes&oldid=287384"