Difference between revisions of "BC796D"
From The RadioReference Wiki
| Line 89: | Line 89: | ||
==Supporting Software== | ==Supporting Software== | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
* [http://www.uniden.com/rn_productsupport_downloads.cfm?product=BC796d UASD and Firmware updates 796] | * [http://www.uniden.com/rn_productsupport_downloads.cfm?product=BC796d UASD and Firmware updates 796] | ||
| + | * See our [[Uniden Legacy Software Support]] article for additional software | ||
; Non Windows OS | ; Non Windows OS | ||
| Line 113: | Line 101: | ||
* [http://groups.yahoo.com/group/BC796D/ BC796D Yahoo group] | * [http://groups.yahoo.com/group/BC796D/ BC796D Yahoo group] | ||
* [http://www.radioreference.com/forums/forumdisplay.php?f=82 RadioReference Uniden forum] | * [http://www.radioreference.com/forums/forumdisplay.php?f=82 RadioReference Uniden forum] | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
* [http://www.strongsignals.net/access/forums/viewforum.php?f=6&sid=a008fecb4f59406385d1ff0cbe328c9c Strong Signals BC796D Forum] | * [http://www.strongsignals.net/access/forums/viewforum.php?f=6&sid=a008fecb4f59406385d1ff0cbe328c9c Strong Signals BC796D Forum] | ||
* [http://strongsignals.net/access/forums/viewforum.php?f=29 Strong Signals Uniden Message board] | * [http://strongsignals.net/access/forums/viewforum.php?f=29 Strong Signals Uniden Message board] | ||
Revision as of 19:27, 16 July 2010
The BC796D Digital Capable Scanner is APCO 25 Capable with 1000 channels, 10 banks, 10 priority channels and continuous band coverage.
Contents
General Specifications
Configuration
- Banks/Lists Type
Limits
- Channels: 1000
- Banks: 10 (100 channels each)
- In trunking mode, each bank has 10 Scan Lists of 10 ID's each (100)
Frequency Coverage
- 25.0000 - 512.0000 MHz
- 849.0125 - 868.9875 MHz
- 894.0125 - 956.0000 MHz
- 1240.0000 - 1300.0000 MHz
Features
- Rebanding supported? YES See the Related Pages section
- TrunkTracker IV
- Motorola Control Channel Only scanning option in menu with selectable plan for 800/900 mHz systems but only one site or system can be programmed per bank
- I-Call monitoring
- APCO25 Digital Audio decoding - Including 9600 Baud C4FM & CQPSK*
- Automatic Digital Detect
- 100 cps scan rate
- 16-character Alpha Tagging - Bank Channel and Search Range
- Adjustable scan/search delay/resume
- PC Control/Programming/cloning (Software and serial port interface included)
- CTCSS and DCS automatic identification
- SAME Weather Alert - Specific Area Message Encoding - During a NOAA Weather or Emergency Alert, a code for your specific location will alert you to severe conditions in your immediate area.
- 10 Priority Channels with Priority Plus
- Priority IDs
- Motorola and Project 25 Control Channel only trunking
- Motorola Status Bits
- EDACS partial talkgroup IDs
- EDACS Patch Tracking
- 12 Preprogrammed Service Searches
- 10 Custom search ranges
- Auto store
- Channel alert
- Backlit Keypad - Offers you added visibility for dialing at night or in low light.
- Data skip
Power Requirements
- 13.8V DC @ 700 mA
RR System Compatibility
This scanner is compatible with the following Trunking System Types and System Voices used in the RadioReference Database, of course you must verify that the scanner will cover the appropriate frequency range:
- System Types:
- Motorola Type I
- Motorola Type II
- Motorola Type IIi Hybrid
- Motorola Type II Smartnet
- Motorola Type II Smartzone
- Motorola Type II Smartzone Omnilink
- Motorola Type II VOC
- EDACS Standard (Wide)
- EDACS Standard Networked
- EDACS Narrowband (Narrow)
- EDACS Narrowband Networked
- EDACS SCAT
- LTR Standard
- Project 25 Standard
- System Voices:
- Analog
- Analog and APCO-25 Common Air Interface
- APCO-25 Common Air Interface Exclusive
Owner's Manual
Modifications
Reviews and User Opinions
Related Pages
- BC796 rebanding firmware update
- Strong Signals BC796D Club
- Simulcast digital distortion
- Fix Audio Popping on the 785/796
Supporting Software
- UASD and Firmware updates 796
- See our Uniden Legacy Software Support article for additional software
- Non Windows OS
Yahoo Groups and Mailing Lists (software and receiver support)
- Uniden BC796D-BC296D Yahoo group
- UnidenBC796D Yahoo group
- Uniden_BC796D Yahoo group
- BC796D Yahoo group
- RadioReference Uniden forum
- Strong Signals BC796D Forum
- Strong Signals Uniden Message board
To Erase Memory
- 1) Turn radio off
- 2) Press and hold three keys 2,9,manual and while holding those keys in, turn on radio.
- 3) Display reads "ALL Memory Clear Please Wait"
eBay Listings
Return to Uniden Scanners