Actions

Difference between revisions of "Freescan Create Group"

From The RadioReference Wiki

m
m (remove Yahoo groups listing)
 
(38 intermediate revisions by 2 users not shown)
Line 1: Line 1:
Editing a group is the lowest level in the Dynamic Memory Architecture. Here you can have either frequencies (if you've allocated a conventional system) or talkgroups (for a trunked system). This screen can be accessed by putting the cursor on the desired '''site''', and right clicking (version .8)
+
[[Image:FS create newgroup v8.JPG|thumb|right|allocating a new group]]
 +
 
 +
Editing a group is the lowest level in the Dynamic Memory Architecture. Here you can have either frequencies (if you've allocated a conventional system) or talkgroups (for a trunked system). This screen can be accessed by putting the cursor on the desired '''group'''. When FreeScan allocates a new system, a new site and group are also allocated. If you wish to allocate a new group, be sure the cursor is under the existing group, then right click. The screen to the right results. You can also add a group by clicking on the 'new group' button in the toolbar.
 +
 
 +
 
 +
In addition there are 2 ways to view the data. Checking the '''simple view''' box will show a limited number of elements; unchecking it (Full View) increases the number of elements - for the most part, related to the XT and P2 series scanners - that are displayed. This logic works for both the conventional and talkgroup screens. Controls that are displayed in the Full View are in ''italics''
  
==Editing a Conventional Group==
 
  
[[Image:FreeScan Conventional editgrp.JPG|thumb|right|click to expand]]
+
==Common Fields==
  
* '''Name''' - the name allocated when the import from the UASD or RadioReference completed, or the one used when the group was allocated manually. Notice that it can be justified using one of the three tools at the top right of the name field, or by using the [[Freescan Edit functions|Justify Channel Names]] function.
+
* '''Name''' - the name allocated when the import from the UASD, BuTel or RadioReference completed, or the one used when the group was allocated manually. Notice that it can be justified using one of the three tools at the top right of the name field, or by using the [[Freescan Edit functions|Justify Channel Names]] function. To change data in this column, ''double click'' on it first.
  
* '''Quick Key''' - the '''Group''' Quick Key (GQK) assigned to this group. The '''Find Free''' button will attempt to find the next unassigned GQK - however you can override this with the pulldown
+
* '''Quick Key''' - the '''Group''' Quick Key (GQK) assigned to this group. The '''Find Free''' button will attempt to find the next unassigned GQK - however you can override this with the pulldown. Be sure that the selected GQK is checked off on the System screen. This insures that the GQK is allocated and enabled.
  
 
* '''Locked Out''' - If checked, this group is locked out and will not be scanned
 
* '''Locked Out''' - If checked, this group is locked out and will not be scanned
Line 20: Line 24:
  
 
* '''EZ-GRAB''' - See the [[Freescan EZGrab|EZ GRAB]] article on how to use this function
 
* '''EZ-GRAB''' - See the [[Freescan EZGrab|EZ GRAB]] article on how to use this function
 +
 +
* '''GPS (XT scanners only)'''- Be sure to click on the '''Enabled''' box. Pressing '''Edit GPS Settings''' displays the GPS Settings screen, where locations and ranges may be defined. See the [[FreeSCAN-GPS]] article for more information
 +
 +
* Using the '''Control''' key - While typing your changes, hold the CTRL key down. Release the key when you are finished with your change, then as soon as you click on another line, the changes will be applied to that line.
 +
 +
==Editing a Conventional Group==
 +
<gallery>
 +
Image:FS convent simpleview v8.JPG|Simple convent view
 +
Image:FS conven XTview1 v8.JPG|Full convent view part 1
 +
Image:FS conven XTview2 v8.JPG|Full convent view part 2
 +
</gallery>
 +
 +
''Click on images to expand''<br>
  
 
* '''Display''' - The alpha text to be displayed when the group is scanned. Limited to 16 characters for the 996 and 15.
 
* '''Display''' - The alpha text to be displayed when the group is scanned. Limited to 16 characters for the 996 and 15.
Line 25: Line 42:
 
* '''Frequency''' - in Mhz
 
* '''Frequency''' - in Mhz
  
* '''Step''' - The seperation, in khz, between each frequency. In most cases AUTO will work, although you may need to change it if defining a narrow band system. See the [[Refarming]] article for a discussion of narrowbanding, and its impact on frequency allocations. This option is only applicable to the SC230 & BC246T.
+
** Both the Display and Frequency fields must be ''double clicked'' to open them for editing
 +
 
 +
* '''L/O''' - If checked this frequency is locked out
  
* '''Mod''' - the operating mode for this frequency
+
* '''TONE''' - Either [[PL]] or [[DCS]] - the subaudible tone associated with this frequency. You can also use this to select 'Search' mode.
  
* '''L/O''' - If checked this frequency is locked out
+
* '''Tone LO''' - Tone Lockout. Sets the tone for the scanner '''to ignore'''; in other words, if the scanner detects the tone the signal will by bypassed.
  
 
* '''ATT''' - If checked this frequency is attenuated in signal strength by 20db
 
* '''ATT''' - If checked this frequency is attenuated in signal strength by 20db
Line 35: Line 54:
 
* '''PRI''' - Priority. If checked this frequency is checked every 2 seconds
 
* '''PRI''' - Priority. If checked this frequency is checked every 2 seconds
  
* '''TONE''' - Either [[PL]] or [[DCS]] - the subaudible tone associated with this frequency. You can also use this to select 'Search' mode.
+
* '''Step''' - The seperation, in khz, between each frequency. In most cases AUTO will work, although you may need to change it if defining a narrow band system. See the [[Refarming]] article for a discussion of narrowbanding, and its impact on frequency allocations. 
 +
 
 +
* '''Mod''' - the operating mode for this frequency
 +
 
 +
* '''Audio Type''' - Analog or digital (396XT/996XT/996 '''only''') Audio type is now set to digital automatically if you specify a NAC (XT only)
 +
 
 +
* ''NAC'' - Network Access Code. For the BCD396XT/996XT '''only'''. Specify the hex value only, without the dollar sign ($) or the word 'NAC' after it (as it's shown in the RR database)
 +
 
 +
* ''ALT Tone'' - See the [http://info.uniden.com/twiki/bin/view/UnidenMan4/SetAlertTone Set Alert Tone] article in the Uniden Twiki
 +
 
 +
* ''ALT Level'' - The volume level for the alert type
  
* '''Alt Tone''' - Alert Tone. Set off an alert when the channel becomes active.
+
* ''ALT Color'' - The color used when the emergency flag is set. Values are Blue, Red, Magenta, Green, Cyan, Yellow, or White
  
* '''Alt Lvl''' - Alert Level. Varies between 1 and 15
+
* ''ALT PAT'' - The light pattern used when the emergency flag is set. Values are slow or fast blink
  
* '''Type''' - Alert type. There are 9 different types of alerts; consists of varying beep types.
+
* ''VOL ADJ'' - See the [http://info.uniden.com/twiki/bin/view/UnidenMan4/TemplateVolumeOffset Volume Offset] section of the Uniden TWiki
  
* '''Tone LO''' - Tone Lockout. Sets the tone for the scanner '''to ignore'''; in other words, if the scanner detects the tone the signal will by bypassed.
+
* ''Num Tag'' - Channel Number Tag XT scanners '''only''' See the [http://info.uniden.com/twiki/bin/view/UnidenMan4/NumberTags Number Tags] section of the Uniden TWiki
  
* '''Tape''' - when it's ON or ALL this channel's audio will be sent to the tape out jack. For use with the BCT15 and BCD996
+
* '''Rec Out''' (For use with the BCT15, BCD996, BCT15X and BCD996XT '''only''')- when it's ON or ALL this channel's audio will be sent to the tape out jack.  
  
 
* '''Comment''' - Comments stored within FreeScan, and not uploaded to the scanner
 
* '''Comment''' - Comments stored within FreeScan, and not uploaded to the scanner
  
 
==Editing a Trunked Group==
 
==Editing a Trunked Group==
 +
<gallery>
 +
Image:FS tlkgroup simpview v8.JPG|TG display simple view
 +
Image:FS tlkgroup XTview1 v8.JPG|TG display full view part 1
 +
Image:FS tlkgroup XTview2 v8.JPG|TG display full view part 2
 +
</gallery>
  
[[Image:FreeScan Trunk edittalk.JPG|thumb|right|click to expand]]
+
* '''Display''' - Alpha tag, limited to 16 characters. Be sure to ''double click'' on it to open it for editing.
  
Most every key shown here is also defined on the Conventional screen. The '''TGID''' is the [[Talkgroup]] ID for the system being defined.
+
* '''TG ID''' - Talkgroup ID. Like the Display function, you must ''double click'' on it to open it for editing.
 +
 
 +
* '''L/O''' - Lockout
 +
 
 +
* ''ALT Tone'' - same as the conventional group definition above
 +
 
 +
* ''ALT Level'' - same as the conventional group definition above
 +
 
 +
* ''ALT Color'' - same as the conventional group definition above
 +
 
 +
* ''ALT PAT'' - same as the conventional group definition above
 +
 
 +
* ''VOL ADJ'' - same as the conventional group definition above
 +
 
 +
* '''Pri''' - Priority (must have set Priority ID Scan on in the System screen)
 +
 
 +
* '''Audio Type''' - Analog/digital (996/396XT '''only''')
 +
 
 +
* ''Num Tag'' - same as the conventional group definition above
 +
 
 +
* '''Rec Out''' (For use with the BCT15, BCD996, BCD996XT and BCT15X '''only''')- when it's ON or ALL this channel's audio will be sent to the tape out jack.  
 +
 
 +
* '''Comment''' - Comments stored within FreeScan, and not uploaded to the scanner
 +
 
 +
==Editing Tips==
 +
* You can change parameters as a group in FreeScan by highlighting the channels that you want to change using the standard Windows conventions such as Ctrl-A, Crtl-Click, or Shift-Click. Then if you hold down the Ctrl key, make the change that you want applied to all of the marked channels, and hit enter, it will make the change for all of them. It's harder to describe than it is to do it.  
  
 
   
 
   
 +
<small>Some data comes from the Easier to Read manuals and the Uniden TWiki</small><br>
 
Proceed to the [[Freescan APCO Bandplan|Create/Edit APCO Bandplan]] article<br>
 
Proceed to the [[Freescan APCO Bandplan|Create/Edit APCO Bandplan]] article<br>
 
Return to the [[Freescan Create Site|Create/Edit Site]] article<br>
 
Return to the [[Freescan Create Site|Create/Edit Site]] article<br>
 
Return to the [[FreeScan User Guide]]
 
Return to the [[FreeScan User Guide]]
  
[[Category:Software Applications]]
+
 
 +
[[Category:FreeSCAN]]

Latest revision as of 16:57, 17 October 2020

allocating a new group

Editing a group is the lowest level in the Dynamic Memory Architecture. Here you can have either frequencies (if you've allocated a conventional system) or talkgroups (for a trunked system). This screen can be accessed by putting the cursor on the desired group. When FreeScan allocates a new system, a new site and group are also allocated. If you wish to allocate a new group, be sure the cursor is under the existing group, then right click. The screen to the right results. You can also add a group by clicking on the 'new group' button in the toolbar.


In addition there are 2 ways to view the data. Checking the simple view box will show a limited number of elements; unchecking it (Full View) increases the number of elements - for the most part, related to the XT and P2 series scanners - that are displayed. This logic works for both the conventional and talkgroup screens. Controls that are displayed in the Full View are in italics


Common Fields

  • Name - the name allocated when the import from the UASD, BuTel or RadioReference completed, or the one used when the group was allocated manually. Notice that it can be justified using one of the three tools at the top right of the name field, or by using the Justify Channel Names function. To change data in this column, double click on it first.
  • Quick Key - the Group Quick Key (GQK) assigned to this group. The Find Free button will attempt to find the next unassigned GQK - however you can override this with the pulldown. Be sure that the selected GQK is checked off on the System screen. This insures that the GQK is allocated and enabled.
  • Locked Out - If checked, this group is locked out and will not be scanned
  • Notice that over the Display column are three tools - these will also justify the display names.
  • + - Insert a line
  • X - Delete a line
  • Up/Down arrow - moves a line up or down in the display
  • EZ-GRAB - See the EZ GRAB article on how to use this function
  • GPS (XT scanners only)- Be sure to click on the Enabled box. Pressing Edit GPS Settings displays the GPS Settings screen, where locations and ranges may be defined. See the FreeSCAN-GPS article for more information
  • Using the Control key - While typing your changes, hold the CTRL key down. Release the key when you are finished with your change, then as soon as you click on another line, the changes will be applied to that line.

Editing a Conventional Group

Click on images to expand

  • Display - The alpha text to be displayed when the group is scanned. Limited to 16 characters for the 996 and 15.
  • Frequency - in Mhz
    • Both the Display and Frequency fields must be double clicked to open them for editing
  • L/O - If checked this frequency is locked out
  • TONE - Either PL or DCS - the subaudible tone associated with this frequency. You can also use this to select 'Search' mode.
  • Tone LO - Tone Lockout. Sets the tone for the scanner to ignore; in other words, if the scanner detects the tone the signal will by bypassed.
  • ATT - If checked this frequency is attenuated in signal strength by 20db
  • PRI - Priority. If checked this frequency is checked every 2 seconds
  • Step - The seperation, in khz, between each frequency. In most cases AUTO will work, although you may need to change it if defining a narrow band system. See the Refarming article for a discussion of narrowbanding, and its impact on frequency allocations.
  • Mod - the operating mode for this frequency
  • Audio Type - Analog or digital (396XT/996XT/996 only) Audio type is now set to digital automatically if you specify a NAC (XT only)
  • NAC - Network Access Code. For the BCD396XT/996XT only. Specify the hex value only, without the dollar sign ($) or the word 'NAC' after it (as it's shown in the RR database)
  • ALT Level - The volume level for the alert type
  • ALT Color - The color used when the emergency flag is set. Values are Blue, Red, Magenta, Green, Cyan, Yellow, or White
  • ALT PAT - The light pattern used when the emergency flag is set. Values are slow or fast blink
  • Num Tag - Channel Number Tag XT scanners only See the Number Tags section of the Uniden TWiki
  • Rec Out (For use with the BCT15, BCD996, BCT15X and BCD996XT only)- when it's ON or ALL this channel's audio will be sent to the tape out jack.
  • Comment - Comments stored within FreeScan, and not uploaded to the scanner

Editing a Trunked Group

  • Display - Alpha tag, limited to 16 characters. Be sure to double click on it to open it for editing.
  • TG ID - Talkgroup ID. Like the Display function, you must double click on it to open it for editing.
  • L/O - Lockout
  • ALT Tone - same as the conventional group definition above
  • ALT Level - same as the conventional group definition above
  • ALT Color - same as the conventional group definition above
  • ALT PAT - same as the conventional group definition above
  • VOL ADJ - same as the conventional group definition above
  • Pri - Priority (must have set Priority ID Scan on in the System screen)
  • Audio Type - Analog/digital (996/396XT only)
  • Num Tag - same as the conventional group definition above
  • Rec Out (For use with the BCT15, BCD996, BCD996XT and BCT15X only)- when it's ON or ALL this channel's audio will be sent to the tape out jack.
  • Comment - Comments stored within FreeScan, and not uploaded to the scanner

Editing Tips

  • You can change parameters as a group in FreeScan by highlighting the channels that you want to change using the standard Windows conventions such as Ctrl-A, Crtl-Click, or Shift-Click. Then if you hold down the Ctrl key, make the change that you want applied to all of the marked channels, and hit enter, it will make the change for all of them. It's harder to describe than it is to do it.


Some data comes from the Easier to Read manuals and the Uniden TWiki
Proceed to the Create/Edit APCO Bandplan article
Return to the Create/Edit Site article
Return to the FreeScan User Guide