Actions

Difference between revisions of "Pro-96"

From The RadioReference Wiki

(Added pro96 info)
 
(163 intermediate revisions by 31 users not shown)
Line 1: Line 1:
−
[[Image:Pro96.jpg|thumb|Description]]  
+
[[Image:Pro96.jpg|right|Description]]  
 +
The Pro-96 is discontinued and was manufactured for Radio Shack by GRE America Inc.
  
−
The Radio Shack is a Digital Trunk Tracking scanner which boasts the ability to track APCO 25 digital trunking systems, in addition to following [[Motorola]] type I/II systems and [[EDACS]] trunking systems. Other features include:
+
The Radio Shack is a Digital Trunk Tracking scanner which boasts the ability to track APCO 25 digital trunking systems, in addition to following [[Motorola]] type I/II systems and [[EDACS]] trunking systems.
  
−
*Backlit keypad
+
'''NOTE''' Computer Control of GRE/RS radios is not possible due to firmware limitations.
−
*Virtual Memory - Allows up to 5500 channels
 
−
*Preloaded with the most popular radio systems in the country
 
−
*6 search ranges/ 1 user definable search range
 
−
*[[SAME]] weather alert
 
−
*1 Priority channel
 
−
*Global [[attenuator]]
 
−
*Alpha-tagging
 
−
*[[CTCSS]]/[[DCS]] abilities
 
−
*TCXO for frequency stability
 
−
*Computer Programming (not computer control)
 
  
 +
==General Specifications==
 +
===Features===
 +
* Can be updated to support [[Rebanding]]? {{color|green|YES}} via a custom table
 +
** See Section 7.2 of the [[Rebanding]] article for the software links
 +
* 500 channels - 10 banks +Virtual Memory - Allows up to 5500 channels (11 folders)
 +
* 25-54, 108-174, 216-225, 406-512, 806-960, 1240-1300MHz range
 +
* Scan rate 60 cps
 +
* 5, 6.25, 7.5, 12.5kHz steps
 +
* TCXO for frequency stability (?)
 +
* Digital [[AGC]]
 +
* Adaptive digital tracking (ADT)
 +
* Digital signal processing (DSP)
 +
* [[Continuous Tone-Coded Squelch System|CTCSS]]/[[DCS]] abilities
 +
* 12-character alpha-tagging
 +
* 5 ID lists, 30 IDs per list, 150 IDs per bank
 +
* L/O ID in 'open' mode
 +
* ID delay
 +
* Motorola [[Control Channel Only]] trunking
 +
* Backlit keypad
 +
* Preloaded with the most popular radio systems in the country
 +
* 6 search ranges/ 1 user definable search range
 +
* Search 'seek' feature
 +
* [[SAME]] weather alert/priority
 +
* 1 Priority channel
 +
* Zeromatic search tuning
 +
* Per channel or global [[attenuator]]
 +
* Computer Programming (not computer control)
 +
* 4 AA alkaline/Ni-Cad batteries
 +
* A '''cloning cable''' may be fabricated using 2 1/8 inch mono jacks and shielded cable
  
−
----
+
===RR System Compatibility===
 +
This scanner is compatible with the following Trunking System Types and System Voices used in the RadioReference Database, of course you must verify that the scanner will cover the appropriate frequency range:
 +
* System Types:
 +
** Motorola Type I
 +
** Motorola Type II
 +
** Motorola Type IIi Hybrid
 +
** Motorola Type II Smartnet
 +
** Motorola Type II Smartzone
 +
** Motorola Type II Smartzone Omnilink
 +
** EDACS Standard (Wide)
 +
** EDACS Standard Networked
 +
** Project 25 Standard
  
−
'''Upgrading the Pro-96 to Version 1.3 Firmware'''
+
*System Voices:
 +
** Analog
 +
** Analog and APCO-25 Common Air Interface
 +
** APCO-25 Common Air Interface Exclusive
  
−
You have heard all of the hype about the Pro-96 scanner and perhaps also about this firmware upgrade. All This is going to cover is the dangers associated with this upgrade. Most of it is inconvenience rather than damaging the scanner. I will discuss the procedures, if you want to learn more about the actual features of the Pro-96 or the 1.3 upgrade those will be coming soon. This will also discuss only those that will be bringing their scanners into a Radio Shack Store.
+
==Modifications==
−
----
+
* [http://www.mods.dk/index.php?ModelId=897&RadioRec=radio_shack Mods.dk PRO-96 page]
−
# Bring your scanner into your local Radio Shack and ask for a manager.
+
* [[Pro 93/95/96 Tap |Pro 96 Discriminator Tap]]
−
# Tell the manager that you need to have the Version 1.3 firmware upgrade performed on your Pro-96 scanner.
+
* [http://wiki.radioreference.com/index.php/Image:Pro95TapPt.jpg The Tap Point for a PRO-96, is in the exact same place as the Tap Point for the PRO-95. (TP4)]
−
# Inform them that this upgrade must be done at the Fort Worth, TX Service Center. Ensure that they know not to send it to a regional location as opposed to the Fort Worth Center.
 
−
# If at all possible provide an image of the scanner that shows the condition of your equipment before it leaves your hands and goes to Radio Shack.
 
−
# Ensure that you document personally the condition of the radio (preferably on the actual photo you took) and have the manager acknoledge both the condition of the radio as well as the serial number.
 
−
# Only provide Radio Shack with the Scanner and one battery holder. They do not need the antenna and do not give them any battery packs that you may have.
 
−
# Ensure that all of your data is easily reproducable and backed up somewhere such as Don Starr's Pro-96 software.
 
−
# Contact Radio Shack service department at Fort Worth in 2-3 business days and ensure that it was sent to Fort Worth. You will need the ticket number which the local Radio Shack will provide you with.
 
−
# If it did not go directly to Fort Worth after explaining to the manager that it had to ensure that you contact Radio Shack directly and inform them that they had made a mistake. (I had this happen to me and demanded a replacement scanner, they provided me one of lesser value, but I informed them that I must have the trunking capability which they provided)
 
−
# When repairs are complete, Radio Shack should contact you. Pick up the scanner and verify the condition of the scanner as well as the serial number. If it does not match (i.e. serial number, excessive wear and tear, etc) <strong>DO NOT ACCEPT IT</strong>. Demand repairs and also to receive a loaner Pro-96 as temporary compensation.
 
−
----
 
−
Note: Ensure that when you are working with the Radio Shack personnel you are courteous and polite BUT forceful. Ensure that they do not mistake Kindness for weakness and you will receive superior customer service. Mistakes in regards to the Version 1.3 upgrade are rare considering the volume but ensure that you are taken care of should any occur.
 
  
−
This is my first attempt at an article and you can contact me at RadioReference under Robbyboy
+
;Volume Repair
 +
PART #: 10983344 Pot Assy, W/Switch Volume 8.75
  
−
Cheers
+
You can unlock extra frequencies on the scanner with programming software, turning the range into 17-174, 216-550, 764-1300 MHz. The scanner isn't designed to receive anything outside its original frequency listing, so your scanner could perform really well, or be completely deaf on those extra bands.
−
--[[User:Robbyboy|Robbyboy]] 10:20, 7 Feb 2005 (CST)
+
 
 +
==Reviews and User Opinions==
 +
* [http://www.eham.net/reviews/detail/3548 PRO-96 Reviews at EHam]
 +
*[[Safetyobc's BCD396T vs. Pro-96 Review]]
 +
 
 +
==Related Pages==
 +
; Wiki links
 +
* [[Getting Started with your PRO-96 or PRO-2096]]
 +
* Compare the Pro-96 to other digital models
 +
** [[Digital Scanner Comparison Chart]]
 +
* [[PRO-96 Internal Adjustments]]
 +
 +
 
 +
;RadioReference Links
 +
* [http://www.radioreference.com/forums/showthread.php?t=2666 RadioReference-PRO96 BC296 Comparison Thread]
 +
* [http://www.radioreference.com/forums/showthread.php?t=17894 RadioReference-PRO96 BC396 Comparison Thread]
 +
 +
 
 +
;Support Pages - 1.2, 1.4 DSP Firmware and manuals
 +
* [http://www.scancat.com/OnLineHelp/OEM_Radio_Owners_Manuals/PRO-96-OwnersManual_20-526.pdf Pro-96 Manual]
 +
* [https://www.dropbox.com/s/j8v36sjb7gu6rsm/firmware%201.2%20and%201.4.zip?dl=1 Firmware download 1.2, 1.4 and manual]
 +
 
 +
==Supporting Software==
 +
* [http://www.butelsoftware.com ARC96]
 +
** [http://www.radioreference.com/radioshack/?a=order Radio Shack Scanner Programming Software Licensing]
 +
** [[Radio Shack Programming Software Free Trial]]
 +
** See the [[Radio Shack Scanner Programming Software Support]] article for instructions on installation and registering the software
 +
 
 +
* [http://wiki.radioreference.com/index.php/Win96 Win96 page in the wiki]
 +
** [http://www.eham.net/reviews/detail/5296 Win96 user reviews on EHam]
 +
* [http://www.starrsoft.com/freeware/WinXXDataConverter/default.asp WinXX Data Converter]
 +
; Other Distributors
 +
* [http://www.psredit.com/pro96com/index.html PRO96Com]
 +
 
 +
==Message Boards / Forums==
 +
* {{Forum|radio-shack-scanners.81|RadioReference Radio Shack}}
 +
* [https://www.facebook.com/groups/448987651918830 Radio Scanner World]
 +
* [https://www.facebook.com/groups/667031203353717 Radio Scanners]
 +
* [https://www.facebook.com/groups/4188584134 Scanner Enthusiasts]
 +
* [https://www.facebook.com/groups/2889562301118379 Radio Scanner Help and Chat]
 +
 
 +
==Pro-96 Scanners for Sale==
 +
*[[Pro-96 eBay Listings]]
 +
 
 +
 
 +
Return to [[Radio Shack Scanners]]
 +
 
 +
[[Category:Radio Shack Scanners]]
 +
[[Category:Handheld Scanners]]
 +
[[Category:Digital Scanners without DMR]]
 +
[[Category:Digital Scanners without MOTOTRBO]]
 +
[[Category:Digital Scanners without NXDN]]
 +
[[Category:Digital Scanners without ProVoice]]
 +
[[Category:Rebanding Supported Scanners]]
 +
[[Category:Radio Models]]

Latest revision as of 16:05, 18 July 2023

Description

The Pro-96 is discontinued and was manufactured for Radio Shack by GRE America Inc.

The Radio Shack is a Digital Trunk Tracking scanner which boasts the ability to track APCO 25 digital trunking systems, in addition to following Motorola type I/II systems and EDACS trunking systems.

NOTE Computer Control of GRE/RS radios is not possible due to firmware limitations.

General Specifications

Features

  • Can be updated to support Rebanding? YES via a custom table
    • See Section 7.2 of the Rebanding article for the software links
  • 500 channels - 10 banks +Virtual Memory - Allows up to 5500 channels (11 folders)
  • 25-54, 108-174, 216-225, 406-512, 806-960, 1240-1300MHz range
  • Scan rate 60 cps
  • 5, 6.25, 7.5, 12.5kHz steps
  • TCXO for frequency stability (?)
  • Digital AGC
  • Adaptive digital tracking (ADT)
  • Digital signal processing (DSP)
  • CTCSS/DCS abilities
  • 12-character alpha-tagging
  • 5 ID lists, 30 IDs per list, 150 IDs per bank
  • L/O ID in 'open' mode
  • ID delay
  • Motorola Control Channel Only trunking
  • Backlit keypad
  • Preloaded with the most popular radio systems in the country
  • 6 search ranges/ 1 user definable search range
  • Search 'seek' feature
  • SAME weather alert/priority
  • 1 Priority channel
  • Zeromatic search tuning
  • Per channel or global attenuator
  • Computer Programming (not computer control)
  • 4 AA alkaline/Ni-Cad batteries
  • A cloning cable may be fabricated using 2 1/8 inch mono jacks and shielded cable

RR System Compatibility

This scanner is compatible with the following Trunking System Types and System Voices used in the RadioReference Database, of course you must verify that the scanner will cover the appropriate frequency range:

  • System Types:
    • Motorola Type I
    • Motorola Type II
    • Motorola Type IIi Hybrid
    • Motorola Type II Smartnet
    • Motorola Type II Smartzone
    • Motorola Type II Smartzone Omnilink
    • EDACS Standard (Wide)
    • EDACS Standard Networked
    • Project 25 Standard
  • System Voices:
    • Analog
    • Analog and APCO-25 Common Air Interface
    • APCO-25 Common Air Interface Exclusive

Modifications

Volume Repair

PART #: 10983344 Pot Assy, W/Switch Volume 8.75

You can unlock extra frequencies on the scanner with programming software, turning the range into 17-174, 216-550, 764-1300 MHz. The scanner isn't designed to receive anything outside its original frequency listing, so your scanner could perform really well, or be completely deaf on those extra bands.

Reviews and User Opinions

Related Pages

Wiki links


RadioReference Links


Support Pages - 1.2, 1.4 DSP Firmware and manuals

Supporting Software

Other Distributors

Message Boards / Forums

Pro-96 Scanners for Sale


Return to Radio Shack Scanners

Retrieved from "https://wiki.radioreference.com/index.php?title=Pro-96&oldid=315234"