Difference between revisions of "SCAN-AID"
From The RadioReference Wiki
(254 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
− | + | <b>4/24 - THIS PAGE IS UNDER CONSTRUCTION. </br> | |
+ | THIS IS A "WORK-IN-PROGRESS" and will be broken up into additional pages.</br> | ||
---- | ---- | ||
− | Please do not edit anything on the page. If you have ideas or questions, please message me on the forums or email me at starcom21@RadioReference | + | Please do not edit anything on the page. If you have ideas, corrections or questions, please message me on the forums or email me at starcom21@RadioReference.com </b> |
---- | ---- | ||
+ | {| class="wikitable" style="text-align:center; font-family:Arial, Helvetica, sans-serif !important;" | ||
+ | |- | ||
+ | ! xxx | ||
+ | ! P | ||
+ | ! C | ||
+ | ! L | ||
+ | ! P | ||
+ | ! U | ||
+ | ! Map | ||
+ | |- | ||
+ | | R | ||
+ | | I | ||
+ | | I | ||
+ | | style="text-align:left;" | | ||
+ | | S | ||
+ | | I | ||
+ | | I | ||
+ | | D | ||
+ | |} | ||
+ | = Introduction = | ||
+ | Welcome to SCAN-AID. Using a combination of material that I have found and knowledge that I have gained, from over the years. | ||
+ | |||
+ | 1) Watch this video [https://www.youtube.com/watch?v=9vU0qMmyJs0 Radio System Operation for Public Safety Communications Professionals] about HOW radio systems work. This is one of the easiest explanations of Two-Way radio operations that I've ever seen. (It does not cover DMR, NXDN or P25 Phase II) | ||
+ | |||
+ | <b><i>Note: I do NOT take personal credit for some information compiled in these wiki articles. It's mostly info gathered through scanner forums, groups, websites, youtube, etc AND personal experience. I have done my best to make sure what I have here is correct, but to welcome constructive criticism or corrections. starcom21@RadioReference.com. Also, I have tried give credit to others when possible. </b></i>. | ||
+ | |||
+ | |||
+ | === My Story === | ||
+ | I grew up in a town of 5400, the County Seat, of about 45,000-50,000 people, but in the 11th largest Illinois County of 862.91 sq mi. We were in telephone 2 area codes and 3 telephone LATAs (Local Access and Transport Area which defines geographical boundaries of local telephone service networks), Due to these LATAs, Enhanced 911 service was not able to go live until 10 years after the E911 system was approved by the voters. Before this, there was not countywide Fire/EMS dispatch system and everyone was dispatched by different methods, radio frequencies, etc. | ||
+ | In the county, there are 26 townships (each with their own road department, 26 communities (Cities, Towns, Villages, non-incorporated, 10 police departments, 11 fire districts, 7 ambulance services. My town had the largest school district by area, in the area, and 2nd largest school attendance; with another 8 districts in the county (now, there were more before consolidation) | ||
+ | |||
+ | In the 80s, my local town had 1 VHF frequency for Police, Fire, EMS, street/water/sewer, and 1 VHF car-to-car mobile channel for Police. The County Sheriff had 39 MHz radios, with duplex operations, base on one frequency and mobiles on another frequency. They used 39.5 for talking with some other towns and some other counties. They used 39.46 for contact with a couple towns and with the Illinois State Police dispatch. Illinois State Police where also on 42 MHz duplex for District 18. They used 155.475, the ISPERN channel, for alerts. So ISP had both Low and High band radios in their cars and/or carried a VHF portable. They later on used the VHF portables to talk on 155.505 back to the 42 MHz mobile radios for vehicular repeaters. Secretary of State Police, Conservation Police and DNR were on multiple VHF repeaters across the state, but still used UHF to talk to ISP Dispatch. They also used VHF vehicular repeaters. The local school district had one simplex Base/Mobile frequency. Eventually the County Highway department and some township road departments had their own VHF simplex radios. As a kid, I couldn't tell much of anything else in town that had any radios, except for the scanner crystals "list" you could see at the local RCA dealer, who also sold Bearcat scanners and crystals. Our local Radio Shack also had scanners and crystals available. We had a Bearcat IV 8 channel scanner sitting at home. | ||
+ | |||
+ | I started buying some inexpensive 4-6 channel portable scanners, found at yard sales, etc. I rode my bike miles a day, so often they fell and broke easily. I used rechargeable batteries that I bought from Walmart. I got my first programmable scanner, a handheld, probably the Pro-2006 around 1990 or so, and new I had to take a lot better care. By then, I wasn't riding my bike as much, so only damage from faulty handling. | ||
+ | |||
+ | My friends were members of a local Boy Scout Fire Explorer Post. We had CB radios is our vehicles and a base station set up in my home 2 story house, the fire department and a few other places, that we used to contact each other with. We applied for an FCC License/radio frequency and had a VHF frequency for use, but never got the radios. In the 80s and early 90s, CB radios were still very big with teenagers and 20-somethings that were "cruising the town" in the evenings, but especially on weekends. The local Police and some state police also had CB radios (and sometimes scanners). Even out late out night, helped out people and truckers who were looking for the hospital or were lost. There were multiple other huge CB enthusiasts in town (former Truckers, etc) that had base stations in their homes. | ||
+ | |||
+ | As I got a better job and moved out, with my own vehicle, I ended up with mobile programmable units too. I eventually moved out of town for work and came back home all the time. Back then there was little trunking in the early-to-mid 90s. It was so easy just to program analog frequencies in a scanner that had memory banks. | ||
+ | |||
+ | Living in Springfield IL in the 90s, Police moved from UHF, to a Motorola Type 1, upgraded to a Motorola Type 2, then eventually their own P25 system with back up on STARCOM21. Fire in the state capital Springfield as well as countywide was still on VHF and continues to this day. County was upgraded from 1 Base/Mobile frequencies to multiple repeaters in the county. City Fire was still analog for a long time until switching to the statewide P25 800 MHz system. County Fire departments are also moving to the statewide system, with the addition of Simulcast towers in the county. | ||
+ | = Frequencies = | ||
+ | * [https://akwg.cap.gov/media/cms/US_VHF_Marine_Frequency_List_01C6E75413CF3.pdf United States VHF Marine Frequency List] | ||
+ | * [[SCAN-AID-Frequencies]] Under Construction | ||
= Scanners / Receivers = | = Scanners / Receivers = | ||
Line 12: | Line 56: | ||
== Uniden== | == Uniden== | ||
* [https://forums.radioreference.com/forums/uniden-forums.82/ Uniden Forums RR] [https://forums.radioreference.com/forums/uniden-tech-discussion.248/ Uniden Tech Discussion RR] [https://forums.radioreference.com/forums/the-uniden-tavern.254/ Uniden Tavern RR] [https://forums.radioreference.com/threads/new-models-bcd160dn-and-bcd260dn.461020/ Release Thread RR] [https://www.uniden.info/download/ Uniden Website for downloading updates and owner's manuals. | * [https://forums.radioreference.com/forums/uniden-forums.82/ Uniden Forums RR] [https://forums.radioreference.com/forums/uniden-tech-discussion.248/ Uniden Tech Discussion RR] [https://forums.radioreference.com/forums/the-uniden-tavern.254/ Uniden Tavern RR] [https://forums.radioreference.com/threads/new-models-bcd160dn-and-bcd260dn.461020/ Release Thread RR] [https://www.uniden.info/download/ Uniden Website for downloading updates and owner's manuals. | ||
+ | * [https://wiki.radioreference.com/index.php/Third_Party_Accessories_and_Battery_Tips_for_the_436,_536_and_SDS_Scanners#Bluetooth_Transmitters Third Party Accessories and Battery Tips for the 436, 536 and SDS Scanners (Beltclips, Batteries, Bluetooth, Cases, Antennas, Etc.] | ||
=== New Uniden Bearcat BCD160DN & BCD260DN === | === New Uniden Bearcat BCD160DN & BCD260DN === | ||
Line 44: | Line 89: | ||
'''Waterfall Option''' [http://www.scannermaster.com Buy the Upgrade] | '''Waterfall Option''' [http://www.scannermaster.com Buy the Upgrade] | ||
* [https://www.uniden.info/download/ompdf/SDS100Waterfallom.pdf Waterfall Feature Manual] (PDF) | * [https://www.uniden.info/download/ompdf/SDS100Waterfallom.pdf Waterfall Feature Manual] (PDF) | ||
− | * [https://www.youtube.com/watch?v=JUnlCEfgxkU Features explained on YouTube] by HAMTech | + | * [https://www.youtube.com/watch?v=JUnlCEfgxkU Features explained on YouTube] by HAMTech [https://www.youtube.com/watch?v=uX5GiljOt44 Start-Up Guide (Zip Scanners)] |
* 12/23 - Waterfall/Firmware Update - https://forums.radioreference.com/threads/future-sds-firmware-to-include-waterfall-option.463094/ | * 12/23 - Waterfall/Firmware Update - https://forums.radioreference.com/threads/future-sds-firmware-to-include-waterfall-option.463094/ | ||
* 12/23 - Waterfall/Firmware Update - https://forums.radioreference.com/threads/new-sds-firmware-2023.466918/ | * 12/23 - Waterfall/Firmware Update - https://forums.radioreference.com/threads/new-sds-firmware-2023.466918/ | ||
* 12/23 - RDforum.org - https://www.rdforum.org/threads/134482/ | * 12/23 - RDforum.org - https://www.rdforum.org/threads/134482/ | ||
---- | ---- | ||
+ | |||
=== Uniden Trunking Display Codes === | === Uniden Trunking Display Codes === | ||
− | • CAP. Capacity Plus/Linked Capacity Plus site’s voice and data in | + | • CAP. Capacity Plus/Linked Capacity Plus site’s voice and data in DMR system.</br> |
− | • CON. Connect Plus site’s voice and data in | + | • CON. Connect Plus site’s voice and data in DMR system.</br> |
− | • DT3. Trunked DMR site’s voice and data in ETSI Standard Tier 3 system. | + | • DT3. Trunked DMR site’s voice and data in ETSI Standard Tier 3 system.</br> |
− | • DMR. One frequency DMR site’s voice and data/Simplex DMR voice. | + | • DMR. One frequency DMR site’s voice and data/Simplex DMR voice.</br> |
− | • IDS. IDAS in NXDN system. | + | • IDS. IDAS in NXDN system.</br> |
− | • ND4. NXDN 4800 Direct Frequency | + | • ND4. NXDN 4800 Direct Frequency</br> |
− | • ND9. NXDN 9600 Direct Frequency | + | • ND9. NXDN 9600 Direct Frequency</br> |
− | • NX4. NXDN 4800 NEXEDGE | + | • NX4. NXDN 4800 NEXEDGE</br> |
− | • NX9. NXDN 9600 NEXEDGE | + | • NX9. NXDN 9600 NEXEDGE</br> |
− | • NXD. Unknown NXDN system | + | • NXD. Unknown NXDN system</br> |
− | • XPT. Hytera XPT site’s voice and data in MotoTRBO system. | + | • XPT. Hytera XPT site’s voice and data in MotoTRBO system.</br> |
− | • P25/DAT APCO P25 | + | • P25/DAT APCO P25</br> |
---- | ---- | ||
+ | |||
=== Understanding Favorite Lists / Quick Keys on Uniden Scanners === | === Understanding Favorite Lists / Quick Keys on Uniden Scanners === | ||
---- | ---- | ||
=== GPS Features on Scanners === | === GPS Features on Scanners === | ||
+ | * Program each frequency with Coordinates (latitude and longitude) and a radius. While travelling, with your GPS attached, the scanner will move through the frequency lists that in in the area of the radius that you are | ||
+ | |||
+ | === Trunking Discovery on UNIDEN === | ||
+ | * Helps you find talkgroups. Start it and return later to see the active talkgroups and listen to activity to determine usage. | ||
− | + | === Analyze / LCN Finder on UNIDEN === | |
− | * === | + | * You can Analyze a TRS for site number, site [https://www.youtube.com/watch?v=CsFVQ5UoKtA SDS200 Analyze Function (by mesascan)] |
+ | * You can use LCN finder on a CAP+, CON+, CAP MAX, NXDN systems. | ||
+ | * If you only get a partial number of LCN's detected, you can back out and it will ask you if you want to save the found LCNs. | ||
+ | * LCNs are the same as Channel Numbers. LSNs are ......................... | ||
+ | |||
+ | '''Additional Information''' | ||
+ | * [https://www.youtube.com/watch?v=lDzNg2R4w2Y&t=28s Uniden LCN Finder Feature - What some people don't realise about LCN Finder.(by VicRadio Zone)] | ||
+ | * [https://www.youtube.com/watch?v=eoHy-wXEpEI Uniden SDS100 Scanner LCN Finder (by Steve St Denis)] | ||
+ | * [https://www.youtube.com/watch?v=bkJCIRWesOs Uniden SDS100 - How To Discover and Program DMR Cap+ Systems (by Boy and a Scanner)] | ||
== Whistler Scanners== | == Whistler Scanners== | ||
Line 85: | Line 144: | ||
* [https://forums.radioreference.com/forums/icom-receivers.84/ RR Forum] | * [https://forums.radioreference.com/forums/icom-receivers.84/ RR Forum] | ||
---- | ---- | ||
− | == Railroad Monitoring = | + | == Racing Electronics == |
− | * Using Two-Way Radios as a "Scanner" | + | * [https://racingelectronics.com/ Website] [https://www.facebook.com/RacingElectronics/ Facebook] |
+ | * Scanners, Receivers, headsets and gears for racing fans [https://racingelectronics.com/collections/rentals Webpage] | ||
+ | * Provides rental service at major racing events | ||
+ | |||
+ | === REceiver === | ||
+ | * [https://racingelectronics.com/collections/scanners-accessories/products/receiver-miniature-uhf-for-fans Webpage] | ||
+ | * Miniature VHF receiver, with 2 programmable and scannable presets with LCD screen, stereo/mono audio in/out ports, adjustable volume, compact size | ||
+ | |||
+ | === RE3000 Scanner (450-470 MHz) === | ||
+ | * Over-the-air programmable, 440 Channel programmable, zero latency | ||
+ | ---- | ||
+ | == Scanner Mounts == | ||
+ | * Home, Car, Bike | ||
+ | * 3D Printer Technology | ||
+ | |||
+ | == SDRs - Software Defined Radios == | ||
+ | * SDS100, 200, many of the latest models of scanners. | ||
+ | * SDRs... | ||
+ | * SDRTrunk Software [https://forums.radioreference.com/threads/sdrtrunk-and-dmr.467548/ Discussion] | ||
+ | * DSD+ Software can also be used | ||
+ | |||
+ | = Railroad Monitoring (Railfanning) = | ||
+ | * AAR Channels | ||
+ | * Future NXDN | ||
+ | |||
+ | * Using Two-Way Radios as a "Scanner" is great for railroad monitoring. Everything must be in the same band *** | ||
+ | * BCD125 is a great scanner for Railfanning | ||
+ | ---- | ||
+ | === Related Websites === | ||
+ | * The web is FULL of Railfan and Railroad related sites and there a lot of groups on Facebook. | ||
+ | |||
---- | ---- | ||
+ | === Related Videos === | ||
+ | * [https://www.youtube.com/@distantsignal Danny Harmon at Distant Signal] One of the best narrators on the air. [https://www.facebook.com/RailfanDanny/ Facebook page] | ||
+ | |||
= Other Scanner Features / Mobile Device Aps = | = Other Scanner Features / Mobile Device Aps = | ||
== Two-Tone Paging / "Fire Tone-Outs" == | == Two-Tone Paging / "Fire Tone-Outs" == | ||
Line 94: | Line 186: | ||
---- | ---- | ||
== Scanner Programming Software == | == Scanner Programming Software == | ||
+ | ;Note: Most/all scanner programming is set up for WINDOWS OS. If you are using a Mac, you'll have to use Parallels, etc. | ||
* [https://www.scannerschool.com/butel/ ButTel Software] by Gommert | * [https://www.scannerschool.com/butel/ ButTel Software] by Gommert | ||
* [https://www.scannerschool.com/freescan FreeSCAN] For Uniden SC230, BC246T, UBC3500XLT, BR330T, BCD396T, BC346XT(C), BCD396XT, BCT15X, BCD996XT, BCT15 and BCD996T, BCD996P2 only | * [https://www.scannerschool.com/freescan FreeSCAN] For Uniden SC230, BC246T, UBC3500XLT, BR330T, BCD396T, BC346XT(C), BCD396XT, BCT15X, BCD996XT, BCT15 and BCD996T, BCD996P2 only | ||
Line 103: | Line 196: | ||
* GPS inside the unit. | * GPS inside the unit. | ||
* More durable standards like used on Motorola, Kenwood name brand 2-way radios | * More durable standards like used on Motorola, Kenwood name brand 2-way radios | ||
− | * Waterproof | + | * Waterproof/IP-68 (see above) |
− | * Cradle charging / Drop-In Chargers | + | * Cradle charging / Drop-In Chargers (with antenna port?) |
+ | * Batteries (like 2-way where you can have additional pre-charged batteries available) | ||
* USB-C Charging | * USB-C Charging | ||
− | * BLUETOOTH | + | * BLUETOOTH for listening AND programming from PC. (Program from your home to your mobile in your car....) |
− | * REMOTE head (or ability to see on a phone/tablet screen) | + | * Program from Android/iOS (see Remote Head) |
+ | * Voice announcements (tuning/programming etc) for the seeing impaired | ||
+ | * REMOTE head (or ability to see on a phone/tablet screen) (Make a specific type of display/phone for remote heads) | ||
+ | * I.F. Out with Discriminator Tap (ready to use) | ||
---- | ---- | ||
+ | |||
== Pagers == | == Pagers == | ||
=== Unication === | === Unication === | ||
Line 117: | Line 215: | ||
;National Weather Service alert tone, 1050 Hz. | ;National Weather Service alert tone, 1050 Hz. | ||
* adding the 2-tone protocol is under tab C. https://www.unicationusa.com/_files/ugd/9bbbf0_7118b145436e4a8ea49908f00070f911.pdf | * adding the 2-tone protocol is under tab C. https://www.unicationusa.com/_files/ugd/9bbbf0_7118b145436e4a8ea49908f00070f911.pdf | ||
− | ---- | + | ----- |
+ | = Weather Alerts = | ||
+ | === Outdoor Warning Sirens === | ||
+ | <i> Originally started out as "Civil Defense", as "Air Raid Sirens", until after the war scar was over, these sirens often got used for alerting the local volunteer fire departments of a fire. Later use included severe weather warning alerts. </i> It took many years for these to go away, although some places are still using them. Most places have upgraded to citywide siren systems, that can be most useful for OUTDOOR warnings to the public. These are usually a form of DTMF "tones", data or digital radio traffic. | ||
+ | |||
+ | Sirens are sometimes integrated into a warning system that links sirens with other warning media, such as the radio and TV Emergency Alert System, NOAA Weather Radio, telephone alerting systems, Reverse 911, Cable Override, and wireless alerting systems in the United States and the National Public Alerting System, Alert Ready, in Canada. This fluid approach enhances the credibility of warnings and reduces the risk of assumed false alarms by corroborating warning messages through multiple forms of media. The Common Alerting Protocol is a technical standard for this sort of multi-system integration | ||
+ | |||
+ | Siren installations have many ways of being activated. Commonly used methods are dual-tone multi-frequency signaling (DTMF) or public switched telephone network (PSTN) using telephone lines, but activation can also be done via radio broadcast. This method opens up vulnerability for exploitation, but there are protections from false alarms. These sirens can also be tied into other networks such as a fire department's volunteer notification/paging system. The basics of this type of installation would consist of a device (possibly the same pager the firefighters have) connected to the controller/timer system of the siren. When a page is received, the siren is activated | ||
+ | |||
+ | DTMF - https://www.techtarget.com/searchnetworking/definition/DTMF | ||
+ | |||
+ | * [https://aem.eco/product/sirens/ AEM Sirens] | ||
+ | |||
+ | ===NOAA Weather Radio === | ||
+ | *Move info from above, list frequencies, information about F.I.P.S | ||
+ | |||
+ | * [https://www.weather.gov/dvn/sirenFAQ Siren FAQ from the National Weather Service] | ||
+ | |||
+ | * Most scanners of lately, have been capable of receiving S.A.M.E. codes /NWS and alert xxxxxxxxxxxxxxxxxx | ||
+ | |||
+ | '''Midland WR-100 NOAA All Hazards Radio" | ||
+ | * [https://oldcyberdude.com/wp-content/uploads/2020/03/NOAA-WX-Radio-Cloning.pdf Cloning multiple units with the same information] [https://oldcyberdude.com/sample-page/emcomm/clone-midland-wr120b-wx-radio/ (Note: You must create a cable)] | ||
+ | |||
==Dispatching Solutions== | ==Dispatching Solutions== | ||
=== Zetron === | === Zetron === | ||
* [https://accessmarketingteam.com/zetron-max-solutions-1 MAX Dispatch/Call Taking/CAD/MIS-GIS Mapping] | * [https://accessmarketingteam.com/zetron-max-solutions-1 MAX Dispatch/Call Taking/CAD/MIS-GIS Mapping] | ||
* [https://accessmarketingteam.com/zetron-fire-station-alert Fire Station Alerting] [https://youtu.be/LVL7P9wiLRE Video] | * [https://accessmarketingteam.com/zetron-fire-station-alert Fire Station Alerting] [https://youtu.be/LVL7P9wiLRE Video] | ||
+ | |||
+ | === Motorola Dispatch Consoles === | ||
+ | * [https://www.datatronicscom.com/motorola/motorola-mcd5000.htm Motorola MCD 5000m Deskset System With MOTOTRBO] | ||
+ | * AVETEC INC (Part of Motorola since 2019) [Scout EX, Scout E8, Scout E4 and Scout E1 console https://www.datatronicscom.com/motorola/avtec/] | ||
+ | |||
+ | === Miscellaneous === | ||
+ | * [https://www.datatronicscom.com/motorola/mototrbo/applications/integrated-command-control.htm#radiopro RadioPro] Radio Over IP Solutions For Pcs And Mobile Devices; provides remote access to Motorola MOTOTRBO radios via IP Networks. | ||
+ | * [https://www.datatronicscom.com/motorola/mototrbo/applications/integrated-command-control-2.htm#safedisptach SafeDispatch Professional Client-Server Integrated Dispatch Solution] | ||
+ | * [https://www.datatronicscom.com/motorola/mototrbo/applications/integrated-command-control-2.htm#smartptt-basic SmartPTT Basic Integrated Solution For MOTOTRBO] | ||
+ | * [https://www.datatronicscom.com/motorola/mototrbo/applications/integrated-command-control-3.htm#trbonet-enterprise TRBOnet Enterprise Award-Winning IP Dispatch System] | ||
---- | ---- | ||
=== Miscellaneous === | === Miscellaneous === | ||
− | |||
− | |||
* [https://jps.com/products/rsp-z2/ JPS RSP-Z2 Dual-Channel Interoperability Gateway] [https://jps.com/products/interface-cables/ JPS Interface Cables] | * [https://jps.com/products/rsp-z2/ JPS RSP-Z2 Dual-Channel Interoperability Gateway] [https://jps.com/products/interface-cables/ JPS Interface Cables] | ||
= Two-Way Radio = | = Two-Way Radio = | ||
+ | * Battery Types | ||
+ | * PC Programming (vs. Mac/Apple) | ||
+ | |||
== License Free == | == License Free == | ||
* CB Radio how has FM mode available! | * CB Radio how has FM mode available! | ||
− | * FRS | + | * FRS (*shares some frequencies with GMRS) |
− | * GMRS | ||
* MURS | * MURS | ||
+ | |||
+ | === GMRS === | ||
+ | |||
+ | '''Midland MXR10 GMRS Repeater''' | ||
+ | * [https://www.youtube.com/watch?v=HJN62_km4dY AgriStudios for use on Farms] (YouTube). Comes with a really nice antenna | ||
+ | * Programming cable and Windows PC to customize frequency / tone | ||
== Amateur Radio == | == Amateur Radio == | ||
Line 143: | Line 279: | ||
* Attractions (Amusement Parks, Museums, Monuments, Sports Stadiums, Tours (Boats), Zoos..... | * Attractions (Amusement Parks, Museums, Monuments, Sports Stadiums, Tours (Boats), Zoos..... | ||
− | === Aviation === | + | === Airband / Aviation === |
'''AM Aviation Frequencies''' All frequencies here use AM (emission designator 6K00A3E). | '''AM Aviation Frequencies''' All frequencies here use AM (emission designator 6K00A3E). | ||
* 121.5 Emergency & Distress | * 121.5 Emergency & Distress | ||
Line 151: | Line 287: | ||
Emergency Position-Indicating Radio Beacons (EPIRB), Emergency Locator Transmitters (ELTs), and Personal Locator Beacons (PLBs) transmitters operate on 406.0 to 406.10 MHz, and some have low power 121.5 MHz homing beacons. Older ELTs use 121.5 MHz, which is also the civil aviation voice emergency frequency, and are still in widespread use. | Emergency Position-Indicating Radio Beacons (EPIRB), Emergency Locator Transmitters (ELTs), and Personal Locator Beacons (PLBs) transmitters operate on 406.0 to 406.10 MHz, and some have low power 121.5 MHz homing beacons. Older ELTs use 121.5 MHz, which is also the civil aviation voice emergency frequency, and are still in widespread use. | ||
'''Aviation Notes:''' | '''Aviation Notes:''' | ||
− | * Communications with aircraft in the public safety environment is complex and carries additional risks over traditional land mobile radio. Communications occur in both AM and FM modes. AM Communications are typically for pilot to pilot, pilot to tower, pilot to ARTCC, etc. It is less frequently used for tactical Air-to-Ground communications. Extreme caution must be taken with AM Airband frequencies, these are the least desirable choice for Air-to-Ground communication. While not necessarily prohibited, it presents much greater risks to aviation assets than using a discrete Public Safety FM channel. | + | ** Communications with aircraft in the public safety environment is complex and carries additional risks over traditional land mobile radio. Communications occur in both AM and FM modes. AM Communications are typically for pilot to pilot, pilot to tower, pilot to ARTCC, etc. It is less frequently used for tactical Air-to-Ground communications. Extreme caution must be taken with AM Airband frequencies, these are the least desirable choice for Air-to-Ground communication. While not necessarily prohibited, it presents much greater risks to aviation assets than using a discrete Public Safety FM channel. |
* Most Air-to-Ground (A/G) communications occur on FM in the traditional FM VHF, UHF, 700 and 800 MHz bands. Careful coordination of these channels is critical. Frequencies coordinated specifically for that use should be employed. Many jurisdictions have set aside or in some cases licensed specific Air to Ground FM channels in most of the bands. These allow the users to communicate with air assets in a safer environment. A concern with any airborne transmitter is the extended range of the transmission when airborne. It is often the case that an aircraft can broadcast substantially further than the license limitations of the local licensee or user, possibly resulting in unintended interference to other agencies and to the aircraft itself. When multiple aircraft operate in the same theatre of operations, frequency deconfliction and tasking coordination will prevent confusion | * Most Air-to-Ground (A/G) communications occur on FM in the traditional FM VHF, UHF, 700 and 800 MHz bands. Careful coordination of these channels is critical. Frequencies coordinated specifically for that use should be employed. Many jurisdictions have set aside or in some cases licensed specific Air to Ground FM channels in most of the bands. These allow the users to communicate with air assets in a safer environment. A concern with any airborne transmitter is the extended range of the transmission when airborne. It is often the case that an aircraft can broadcast substantially further than the license limitations of the local licensee or user, possibly resulting in unintended interference to other agencies and to the aircraft itself. When multiple aircraft operate in the same theatre of operations, frequency deconfliction and tasking coordination will prevent confusion | ||
− | * Businesses (Small, Medium, Large - include major industrial plants and factories) [[SCAN-AID Businesses]] | + | ** AWOS/ASOS/ATIS - ASOS stands for Automated Surface Observation Station. It is a type of automated weather station that broadcasts important weather details continuously on a specific radio frequency. ASOS is managed, maintained and controlled by NOAA rather than the FAA or the organization that operates the airport. ASOS reports conditions in the immediate vicinity of the airport. At larger towered airports, you may see a human-monitored Automated Terminal Information Service (ATIS) issuing reports rather than AWOS or ASOS. |
+ | |||
+ | * Businesses (Small, Medium, Large - include major industrial plants and factories) [[SCAN-AID Businesses]] Churches, Microphone | ||
* Colleges and Universities | * Colleges and Universities | ||
+ | * Emergency Management (Local, County, State, Federal) (Private agencies) | ||
* EMS (Private and Municipal) | * EMS (Private and Municipal) | ||
* Federal Government (Law Enforcement, United States Postal Service | * Federal Government (Law Enforcement, United States Postal Service | ||
Line 164: | Line 303: | ||
* Manufacturing (Assembly, creation or production of goods with the help of equipment, labor, machines, tools, and chemical or biological processing or formulation.) | * Manufacturing (Assembly, creation or production of goods with the help of equipment, labor, machines, tools, and chemical or biological processing or formulation.) | ||
* Maritime | * Maritime | ||
+ | * Media (TV, Radio and formerly newspapers, as businesses entities) | ||
+ | ** IFB Remote Equipment etc. MARTI, Microphones, News Helicopters, (also UNICOM 121.025??) | ||
+ | ** See [https://youtu.be/V4XgJZLQMtk?si=JfwdL-XTcG1BssVb Eavesdropping on TV Studios YouTube Video] | ||
* Military (related to Federal) | * Military (related to Federal) | ||
* Natural Resources/Conservation/Forestry | * Natural Resources/Conservation/Forestry | ||
+ | * '''Outdoor Warning Siren''' (Data) | ||
+ | **First known as a [https://en.wikipedia.org/wiki/Civil_defense_siren Civil Defense Siren] (WikiPedia) | ||
+ | |||
* Property Management, Facilities Management (?) | * Property Management, Facilities Management (?) | ||
* Public Safety (911, Sheriff, Police, Fire, Rescue, Public Works) | * Public Safety (911, Sheriff, Police, Fire, Rescue, Public Works) | ||
+ | **Fireground, Tac/TAC/Talk-Around, Car-to-Car, Interop, All Call, All Talk Group/ATG, Common, etc. | ||
* Radio Leasing / Radio Companies | * Radio Leasing / Radio Companies | ||
* Railroads and related Recovery Companies [[SCAN-AID Railroad]] | * Railroads and related Recovery Companies [[SCAN-AID Railroad]] | ||
Line 173: | Line 319: | ||
* Retail (Stores, Restaurants, Malls) | * Retail (Stores, Restaurants, Malls) | ||
* Schools (Public, Private)/ School Transportation | * Schools (Public, Private)/ School Transportation | ||
+ | * Search and Rescue Teams | ||
* Security (Private, Contracted, Cash-in-Transit <Brinks>, | * Security (Private, Contracted, Cash-in-Transit <Brinks>, | ||
* Service Companies (HVAC, Plumbing, Repairmen...Concrete, Construction, | * Service Companies (HVAC, Plumbing, Repairmen...Concrete, Construction, | ||
Line 179: | Line 326: | ||
* Utilities (Cable/Fiber/Internet, Telephone, Electric, Gas, Water, Sewer) | * Utilities (Cable/Fiber/Internet, Telephone, Electric, Gas, Water, Sewer) | ||
* Warehousing/Distribution Centers/Refrigeration-Cold Storage (Walmart, Amazon.....) | * Warehousing/Distribution Centers/Refrigeration-Cold Storage (Walmart, Amazon.....) | ||
+ | * Weather (NOAA Weather Radio) + SKYWARN/Amateur Radio repeaters, also see Emergency Management | ||
===FCC Part 90 Common Station Class Codes=== | ===FCC Part 90 Common Station Class Codes=== | ||
Line 193: | Line 341: | ||
* MO8 - Centralized Trunk Mobile Handheld and Vehicular Mounted Radios operating on trunked radio systems below 512 MHz | * MO8 - Centralized Trunk Mobile Handheld and Vehicular Mounted Radios operating on trunked radio systems below 512 MHz | ||
− | ==Two-Way Radio Licensing== | + | ==Two-Way Radio FCC Frequency Licensing== |
− | + | See bottom of page?????????????????????????????????? | |
− | + | ---- | |
− | |||
− | |||
==Brands == | ==Brands == | ||
* [https://bendixkingradios.com/ BendexKing] (NFM and P25) (different model radios can be cloned with others) | * [https://bendixkingradios.com/ BendexKing] (NFM and P25) (different model radios can be cloned with others) | ||
* | * | ||
+ | |||
+ | === Harris === | ||
+ | |||
+ | === JVC/Kenwood === | ||
+ | * VP8000 (similar to Motorola APX8000) EFJohnson/Viking product [https://www.youtube.com/watch?v=g6SIaDqbSVY&t=328s Video 1] [https://www.youtube.com/watch?v=eYhbYYvoiY8&pp=ygUMdzNheGwgdnA4MDAw Video 2] (by W3AXL) Armada programming is fast and easy. Wi-Fi and bluetooth programming. | ||
+ | * larger than APX8000, but weighs less | ||
+ | |||
+ | === Motorola === | ||
+ | * DMR will probably never be available in a Public Safety grade portable radio (that also has P25) | ||
+ | |||
+ | ====Motorola APX8000==== | ||
+ | * Public Safety grade (P25) | ||
+ | * Programming Software is slow. Wi-Fi and bluetooth programming. | ||
=== Watch Duty Echo Project === | === Watch Duty Echo Project === | ||
* [https://www.watchduty.org/blog/inside-watch-dutys-echo-radios-remote-listening-tone-detection-and-early-warning Inside Watch Duty’s Echo Radios: Remote Listening, Tone Detection, and Early Warning] | * [https://www.watchduty.org/blog/inside-watch-dutys-echo-radios-remote-listening-tone-detection-and-early-warning Inside Watch Duty’s Echo Radios: Remote Listening, Tone Detection, and Early Warning] | ||
* Announced Dec 2022, Echo Project for capturing first responder radio communications deep within the wildlands of California and beyond. Watch Duty reporters, (much like traditional news reporters, government contractors, and even utility companies like PG&E) use handheld radio scanners and internet-based scanners to listen to first responders during an emergency. This is how we make sense of what is going on in real-time, between the daily official press briefings to keep residents up-to-date. As it turns out, PG&E and CalFIRE contractors, like dozer operators and water tenders, do precisely the same thing. Contractors and agencies working across multiple regions and states, use the online radio streaming service Broadcastify.com to listen to local radios in multiple regions. | * Announced Dec 2022, Echo Project for capturing first responder radio communications deep within the wildlands of California and beyond. Watch Duty reporters, (much like traditional news reporters, government contractors, and even utility companies like PG&E) use handheld radio scanners and internet-based scanners to listen to first responders during an emergency. This is how we make sense of what is going on in real-time, between the daily official press briefings to keep residents up-to-date. As it turns out, PG&E and CalFIRE contractors, like dozer operators and water tenders, do precisely the same thing. Contractors and agencies working across multiple regions and states, use the online radio streaming service Broadcastify.com to listen to local radios in multiple regions. | ||
+ | |||
+ | ===MPT1327 / TETRA=== | ||
+ | * [https://en.wikipedia.org/wiki/MPT-1327 Wikipedia Info] | ||
+ | '''[https://www.criticalcommunicationsreview.com/dmr/company/48572/flyde-micro Flyde Micro]''' | ||
+ | Fylde is a co founder and current world leader in the design, manufacture and supply of MPT1327 radio trunking networks. Fylde delivered the first ever true MPT system to British Telecom back in 1986 and installed it on the Post office tower in London. This was closely followed by the first multi site systems.</br> | ||
+ | |||
+ | Fylde also actively contribute to the generation and implementation of the new dPMR and DMR digital radio standards and hence are totally aware of the complexities of implementing these standards. It is the Fylde way to always ensure compatibility and upgrade paths for current and new users to our systems. </br> | ||
+ | |||
+ | '''DSD Plus''' | ||
+ | * Will show as "DMR(FLYD)" on decode | ||
+ | |||
+ | |||
+ | == Frequency-Hopping Spread Spectrum (FHSS) == | ||
+ | * [https://en.m.wikipedia.org/wiki/Frequency-hopping_spread_spectrum?wprov=sfla1 Wikipedia info] | ||
+ | |||
= AMATEUR RADIO = | = AMATEUR RADIO = | ||
Line 211: | Line 385: | ||
== Amateur Radio Brands == | == Amateur Radio Brands == | ||
− | + | === [https://www.ailunce.com/ Ailunce] === | |
− | + | '''[https://www.ailunce.com/hd1-dual-band-dmr-amateur-radio#A9131B-J9131P-US HD1 Dual Band Portable]''' | |
− | + | ||
− | + | === Baofeng === | |
− | + | === Icom === | |
− | * Retavis | + | === Kenwood === |
− | * Yaesu | + | === Puxing === |
+ | * [https://www.radioddity.com/ Radioddity] Also an authorized distributor of Baofeng, TYT, QYT, Xiegu ) ALSO | ||
+ | |||
+ | === Retavis === | ||
+ | '''RT-99 Mobile/Base''' [https://www.retevis.com/bluetooth-app-controlled-mobile-radio-rt99-us Website] [https://www.retevissolutions.com/Assets/files/RT99/RT99-Multi-language-Manual.pdf Manual - VERY LIMITED Info (PDF)] | ||
+ | * Operate/Program with phone app. Love this radio! 50W VHF/40W UHF | ||
+ | |||
+ | === TYT === | ||
+ | '''TH-9800''' | ||
+ | * [https://rigreference.com/storage/manuals/tyt/Manual-TYT_TH-9800.pdf--5ea5fc12a6f236.46255750.pdf TH-9800 User Manual] (radio is "comparable" to [https://www.yaesu.com/indexVS.cfm?cmd=DisplayProducts&ProdCatID=106&encProdID=FD01F8F398F2B94A9C9F4299F3D18732 Yaesu FT-8800] | ||
+ | * VGC VR-N7500 is identical radio [https://m6ceb.com/reviews/vero-vr-n7500-dual-band-fm-app-controlled-radio-review/ Review] | ||
+ | * My notes: This radio nearly operates the same as the Yaesu FT-8800. It has more some more options available in menu, but is limited on some other features. After being installed for a bout a year at home, this radio stopped receiving properly and just sounded like the squelch was turned all the way down. No longer able to use this "cheap" knock-off radio. | ||
+ | |||
+ | === Yaesu === | ||
+ | <pre> | ||
+ | Radioddity GD77 & TYT MD-380 are the same radio. BETTER than GD 88 opengd77.com | ||
+ | radiosification.blogspot.com /YT video | ||
+ | Color Code Scan and Time Slot Filter, CRC ignore (gets around RAS on motorola)</pre> | ||
== Amateur Radio Features== | == Amateur Radio Features== | ||
Line 223: | Line 414: | ||
* DMR | * DMR | ||
* Fusion (Yeasu C4FM) | * Fusion (Yeasu C4FM) | ||
+ | |||
+ | == Related Videos== | ||
+ | * [https://www.youtube.com/watch?v=O6AhUS1LSAc&t=28s Build a "Go Anywhere Box" for your Ham Radio] (by Ed Whitney, on YouTube) | ||
+ | * [https://www.youtube.com/watch?v=7Jc3g0us4JE Amateur Radio Go Kit Demo] (by David Fernandez, on YouTube) | ||
+ | * [https://www.youtube.com/watch?v=iT7yziW--d4&pp=ygUpYnVpbGQgYSBnbyBhbndoZXJlIGJveCBmb3IgeW91ciBoYW0gcmFkaW8%3D ICOM IC 7300 Ham Radio Go Box] (by Ham Radio Crash Course, on YouTube) | ||
+ | * [https://www.youtube.com/watch?v=WFLGQ9XpTM0&pp=ygUpYnVpbGQgYSBnbyBhbndoZXJlIGJveCBmb3IgeW91ciBoYW0gcmFkaW8%3D Build and EmComm or Radio Go Box] (by Gadget Talk, on YouTube) | ||
+ | |||
+ | == Microphones == | ||
+ | === PORTABLE RADIOS=== | ||
+ | * 2-3 common type of 2-Pin microphones used on portable radios (Amateur/xxxx) Non-Motorola | ||
+ | === MOBILE / BASE RADIOS === | ||
+ | * Type of connections, old round, network/phone looking type. | ||
+ | |||
+ | == BLUETOOTH == | ||
+ | * Speakers, Head Sets, Ear Pieces, Ear Buds, etc | ||
+ | * Microphones, programming | ||
+ | * [https://wiki.radioreference.com/index.php/Third_Party_Accessories_and_Battery_Tips_for_the_436,_536_and_SDS_Scanners#Bluetooth_Transmitters BT Recommendations] | ||
= 911, InterOp and Related Agencies = | = 911, InterOp and Related Agencies = | ||
Line 229: | Line 437: | ||
* APCO | * APCO | ||
− | + | == Learning Tools for Telecommunications/Dispatcher == | |
+ | * [http://www.svecs.net/Radio101.pdf Radio 101 for the Field and Dispatchers] | ||
+ | |||
+ | === Federal Emergency Management Agency (FEMA) === | ||
* IS-100.C: Introduction to the Incident Command System, ICS 100 | * IS-100.C: Introduction to the Incident Command System, ICS 100 | ||
* IS-200.C: Basic Incident Command System for Initial Response, ICS-200 | * IS-200.C: Basic Incident Command System for Initial Response, ICS-200 | ||
Line 237: | Line 448: | ||
* IS-144.A: TERT Basic Course | * IS-144.A: TERT Basic Course | ||
+ | == 911 / Emergency Medical Dispatcher (EMD) / Telecommunicator Resources == | ||
+ | === International Academies of Emergency Dispatch === | ||
+ | * [https://www.emergencydispatch.org/ IAED Website] [https://www.emergencydispatch.org/in-the-news/press-releases/15aa42c9-2d9f-43b2-9e6d-f8bbe7aaa2f2 EMD/911 Mentoring Program] | ||
+ | |||
+ | === [http://www.prioritydispatch.net Priority Dispatch] === | ||
+ | * [https://prioritydispatch.net/discover-totalsystemsolutions/ Priority Dispatch Introduction | ||
+ | |||
+ | ==== ProQA Software ==== | ||
+ | * [https://prioritydispatch.net/discover_proqa/ Discover ProQA for Police/Fire/EMS call-taking] | ||
+ | * Priority Dispatch ProQA codes may be using on some dispatch broadcasts. You can find the codes elsewhere on the internet. | ||
+ | |||
+ | ==== CritiCall 911 ==== | ||
+ | * [https://criticall911.com/ Website] for Dispatcher/Call-Taker Testing and Training | ||
+ | |||
+ | === Dispatching Radio Screen Software === | ||
+ | ====Motorola's Touchscreen Consoles==== | ||
+ | |||
+ | * [https://techglobal.com/ Tech Global] makes touchscreens that can be used by dispatchers, etc. | ||
+ | |||
+ | ====Mindshare==== | ||
+ | * [https://touchscreenguru.com/solutions/public-safety-911/ TouchScreenGuru] | ||
+ | |||
+ | * [https://microautomation.com/industries/emergency-operations-solutions-and-next-generation-9-1-1-omni911/ Omni911 (calltaker software +)] | ||
+ | * [https://www.l3harris.com/all-capabilities/symphony-dispatch-console Harris Symphony Dispatch Console] | ||
+ | |||
+ | ====AVTEC Scout==== | ||
+ | * [https://connect.avtecinc.com/bundle/ Documentation] [https://www.avtecinc.com/site-library Site Library (Videos, Webinars, etc.] | ||
+ | |||
+ | == Miscellaneous == | ||
+ | * [http://www.eDispatches.com eDispatches.com] eDispatches automatically detects audio dispatches as well as CAD dispatches and delivers notifications directly to your members’ mobile devices. Receive your dispatch via mobile app, text message or by phone call – all with no effort whatsoever from your dispatch center. | ||
+ | |||
+ | === Field/Mobile Radio Communications === | ||
+ | * See DVRS/Vehicular Repeater/Mobile Extender | ||
+ | * SOW/COW | ||
+ | |||
+ | '''Training Videos'''' | ||
+ | * [https://www.youtube.com/watch?v=d-QlFMlGc_o How to better communicate with dispatch] with Cottleville Fire Chief in St Charles County MO | ||
+ | |||
+ | = INTEROP = | ||
==SAFECOM== | ==SAFECOM== | ||
* [https://www.cisa.gov/sites/default/files/2023-08/SAFECOM%20Writing%20Guide%20for%20SOG_final_08-2023.pdf Writing Guide for Standard Operating Guidelines] (Aug 2023 PDF) | * [https://www.cisa.gov/sites/default/files/2023-08/SAFECOM%20Writing%20Guide%20for%20SOG_final_08-2023.pdf Writing Guide for Standard Operating Guidelines] (Aug 2023 PDF) | ||
Line 273: | Line 523: | ||
[[File:CTCSS-NAC-codes.png|400px|thumb|right|CTCSS (PL) Tones]] | [[File:CTCSS-NAC-codes.png|400px|thumb|right|CTCSS (PL) Tones]] | ||
− | = | + | = Microphones for Two-Way Radios = |
− | * [https://wiki.radioreference.com/index.php/Continuous_Tone-Coded_Squelch_System CTCSS in the WIKI] | + | * [https://www.taitradioacademy.com/topic/microphone-manners-how-to-use-your-radio-microphone-1/ How to properly use your microphone (by Tait)] |
− | + | ||
+ | |||
+ | = Volume / Speakers / Line-Out = | ||
+ | == Volume == | ||
+ | |||
+ | == Rec. (Record) Line-Out == | ||
+ | * Useful when recording your scanner audio for later review (using a PC program and/or programming software that keeps track of hits) | ||
+ | |||
+ | * Also see Broadcastify/Online Streaming | ||
+ | |||
+ | == Bluetooth == | ||
+ | * Adding Bluetooth earpieces to your scanner. | ||
+ | * Adding Bluetooth speakers to your scanner. | ||
+ | * Adding Bluetooth speakers to your Unication Pager Device | ||
+ | * Using you | ||
+ | |||
+ | === Speakers === | ||
+ | * | ||
+ | |||
+ | = Live Scanner Feeds / Streaming = | ||
+ | * Broadcastitfy | ||
+ | * Broadcastitfy Calls *****SDR Links | ||
+ | * [https://openmhz.com/ OpenMHZ.com] Listen to Police and Fire radio from across the US; or Broadcast | ||
+ | |||
+ | = Squelch / Carrier Squelch / Codes = | ||
+ | == Squelch == | ||
+ | *Squelch is used in two-way radios and VHF/UHF radio scanners to eliminate the sound of noise when the radio is not receiving a desired transmission. | ||
+ | |||
+ | === Carrier Squelch === | ||
+ | |||
+ | == PL (CTCSS) == | ||
+ | * [https://wiki.radioreference.com/index.php/Continuous_Tone-Coded_Squelch_System CTCSS in the WIKI] [https://en.wikipedia.org/wiki/Continuous_Tone-Coded_Squelch_System CTCSS on WikiPedia (some info shared below] | ||
+ | * Continuous Tone-Coded Squelch System (CTCSS), Private Line (PL by Motorola ®), Channel Guard® (CG) by General Electric and generically as tone squelch | ||
+ | * CSQ, with 50 tones (originally 38) | ||
It is a use of sub-audible tones that are transmitted along with the speech portion of the transmission which allows more than one agency (or fleet) to use the same radio frequency without hearing the other agency on that frequency. Receivers for agency XYZ are set to only open their audio squelch when the proper sub-audible frequency tone is part of the transmission. | It is a use of sub-audible tones that are transmitted along with the speech portion of the transmission which allows more than one agency (or fleet) to use the same radio frequency without hearing the other agency on that frequency. Receivers for agency XYZ are set to only open their audio squelch when the proper sub-audible frequency tone is part of the transmission. | ||
Line 281: | Line 564: | ||
Today the sharing of frequencies by agencies is less common than it once was, CTCSS is more commonly used by repeater systems to prevent noise or interference from causing the repeater squawk obnoxiously, and by receivers as an extra measure of squelch (for instance, to prevent engine noise from breaking squelch). | Today the sharing of frequencies by agencies is less common than it once was, CTCSS is more commonly used by repeater systems to prevent noise or interference from causing the repeater squawk obnoxiously, and by receivers as an extra measure of squelch (for instance, to prevent engine noise from breaking squelch). | ||
− | + | In addition to the standard tones, some manufacturers have made available additional tone frequencies specific to their own products, but not available to products from other manufacturers. | |
+ | |||
+ | <pre> | ||
+ | Because period is the inverse of frequency, lower tone frequencies can take longer to decode (depends on the decoder design). Receivers in a system using 67.0 Hz can take noticeably longer to decode than ones using 203.5 Hz, and they can take longer than one decoding 250.3 Hz. In some repeater systems, the time lag can be significant. The lower tone may cause one or two syllables to be clipped before the receiver audio is unmuted (is heard). This is because receivers are decoding in a chain. The repeater receiver must first sense the carrier signal on the input, then decode the CTCSS tone. When that occurs, the system transmitter turns on, encoding the CTCSS tone on its carrier signal (the output frequency). All radios in the system start decoding after they sense a carrier signal then recognize the tone on the carrier as valid. Any distortion on the encoded tone will also affect the decoding time. | ||
+ | |||
+ | Engineered systems often use tones in the 127.3 Hz to 162.2 Hz range to balance fast decoding with keeping the tones out of the audible part of the receive audio (Courtesy WikiPedia) | ||
+ | </pre> | ||
+ | |||
+ | * Many NATO military radios have a switchable 150.0 Hz tone. The list includes the following radios: AN/PRC-68, AN/PRC-117F, AN/PRC-117G, AN/PRC-77, AN/PRC-113, AN/PRC-137, AN/PRC-139, AN/PRC-152, AN/PRC-119, AN/VRC-12, AN/PSC-5, and Thales AN/PRC-148 MBITR. (from Wikipedia) | ||
+ | |||
+ | ==DPL/DCS/CDCSS== | ||
+ | * CSQ.... | ||
+ | * Standard codes | ||
+ | |||
+ | * Digital-Coded Squelch (DCS) system was developed by Motorola under the trademarked name Digital Private Line (DPL). General Electric responded with the same system under the name of Digital Channel Guard (DCG). The generic name is CDCSS (Continuous Digital-Coded Squelch System). | ||
+ | |||
+ | DCS (Digital-Coded Squelch), generically known as CDCSS (Continuous Digital-Coded Squelch System), was designed as the digital replacement for CTCSS. In the same way that a single CTCSS tone would be used on an entire group of radios, the same DCS code is used in a group of radios. DCS is also referred to as Digital Private Line (or DPL), another trademark of Motorola, and likewise, General Electric's implementation of DCS is referred to as Digital Channel Guard (or DCG). Despite the fact that it is not a tone, DCS is also called DTCS (Digital Tone Code Squelch) by Icom, and other names by other manufacturers. [https://en.wikipedia.org/wiki/Squelch#DCS See DCS on WikiPedia] | ||
+ | |||
+ | |||
+ | * The use of digital squelch on a channel that has existing tone squelch users precludes the use of the 131.8 and 136.5 Hz tones as the digital bit rate is 134.4 bits per second and the decoders set to those two tones will sense an intermittent signal (referred to in the two-way radio field as "falsing" the decoder) (From WikiPedia) | ||
+ | '''* In this same sense, RadioShack/GRE/Whistler scanners may show 136.5 PL on a poorly received transmission using DCS.''' | ||
− | + | ==Digital Modes== | |
+ | ===NAC=== | ||
+ | * Used in P25, conventional and trunking, often pronounced as "Nack" or "Nax" (plural), but can be said as "N" "A" "C". Can be abbreviated to "N" or $, ie $070 | ||
+ | * See [[SCAN-AID#NAC_2 NAC|(under P25)]] | ||
---- | ---- | ||
Line 307: | Line 613: | ||
===Trunked Radio Decoders=== | ===Trunked Radio Decoders=== | ||
* Some professional monitors, scanners and all SDR | * Some professional monitors, scanners and all SDR | ||
− | * https://wiki.radioreference.com/index.php/Trunked_Radio_Decoders | + | * ]https://wiki.radioreference.com/index.php/Trunked_Radio_Decoders RR Wiki Trunked Radio Decodes] |
* Common scanners, capable of decoding | * Common scanners, capable of decoding | ||
Line 314: | Line 620: | ||
==== DSDplus / DSD+ ==== | ==== DSDplus / DSD+ ==== | ||
+ | * [https://forums.radioreference.com/threads/dsd-2-457-available.467125/ V2.457 Available 12/23/23] | ||
* Software checks for updates automatically or you can check for updates manually using the menu selection. | * Software checks for updates automatically or you can check for updates manually using the menu selection. | ||
* Email dsdplusfastlane@gmail.com if you are having subscription problems. | * Email dsdplusfastlane@gmail.com if you are having subscription problems. | ||
* FastLane Updated 2.457 12/27/23 https://forums.radioreference.com/threads/dsd-2-457-availible.467125/ | * FastLane Updated 2.457 12/27/23 https://forums.radioreference.com/threads/dsd-2-457-availible.467125/ | ||
− | === | + | * LRRP - Location Request/Response Protocol |
+ | |||
+ | '''Notes/Future Explanations''' | ||
+ | * "Found Rest Channel''' | ||
+ | |||
+ | === pro96com P25 decoder === | ||
* [http://www.psredit.com/pro96com/ pro96com] P25 Control Channel decoder for xxxxxxx | * [http://www.psredit.com/pro96com/ pro96com] P25 Control Channel decoder for xxxxxxx | ||
+ | * [https://scanner.groups.io/g/PRO96COM/topic/where_are_data_files_saved/43187598?p=,,,20,0,0,0::recentpostdate/sticky,,,20,2,0,43187598,previd=1582492218116602576,nextid=1542820760000000000&previd=1582492218116602576&nextid=1542820760000000000 Where data files are stored] | ||
+ | ==== Other Programs==== | ||
* UniTrunker | * UniTrunker | ||
− | * | + | * [https://github.com/DSheirer/sdrtrunk/releases SDRtrunk Releases] |
+ | * Channel Extractor Pro v1.0.2.4 (in development 1/24) | ||
+ | * [https://www.discriminator.nl/pdw/index-en.html PDW Paging Decoder Software] | ||
− | * | + | ==== Apps ==== |
+ | * Phone - Morse Code etc. | ||
---- | ---- | ||
== Statewide/Areawide Radio Systems == | == Statewide/Areawide Radio Systems == | ||
− | * [https://wiki.radioreference.com/index.php/Arkansas_Wireless_Information_Network_(AWIN) | + | * [https://www.radioreference.com/db/sid/2447 ALMR Alaska Land Mobile Radio (VHF)] [https://alaskalandmobileradio.org/ System Website] |
− | * | + | * [https://www.radioreference.com/db/sid/3918 AWIN Arkansas Wireless Information Network] [https://wiki.radioreference.com/index.php/Arkansas_Wireless_Information_Network_(AWIN) Wiki] |
− | * | + | * [https://www.radioreference.com/db/sid/2324 STARCOM21 Illinois] [https://wiki.radioreference.com/index.php/STARCOM21_Statewide_Illinois Extensive Wiki with RID Listings] |
− | * | + | * [https://www.radioreference.com/db/sid/8084 SAFE-T Indiana] |
− | * | + | * [https://www.radioreference.com/db/sid/6847 MOSWIN Missouri Statewide Wireless Interoperable Network] (See more down the page) |
− | * | + | ** https://www.radioreference.com/db/sid/1085 SALTER St. Louis Area Trunked Emergency Radio] |
+ | * [https://www.radioreference.com/db/sid/6364 WISCOM Wisconsin Interoperable System for Communications] | ||
+ | * [https://www.radioreference.com/db/sid/3508 Minnesota Allied Radio Matrix for Emergency Response (ARMER)] | ||
+ | * [https://www.radioreference.com/db/sid/100 Michigan's Public Safety Communications System (MPSCS)] | ||
+ | * [https://www.radioreference.com/db/sid/6355 TACN Tennessee Advanced Communications Network] | ||
== Trunked Radio Systems == | == Trunked Radio Systems == | ||
Line 356: | Line 677: | ||
=== JVCKenwood NXDN === | === JVCKenwood NXDN === | ||
− | * EF Johnson [https://www.efjohnson.com/services/training_old-ret Training | + | * EF Johnson [https://www.efjohnson.com/services/training_old-ret Training] |
− | + | * LTR | |
− | |||
− | * LTR | ||
− | |||
=== LTE === | === LTE === | ||
Line 370: | Line 688: | ||
===Discriminator Tap "Output"=== | ===Discriminator Tap "Output"=== | ||
https://wiki.radioreference.com/index.php/Discriminator_output | https://wiki.radioreference.com/index.php/Discriminator_output | ||
+ | |||
+ | https://www.discriminator.nl/disc-out/index-en.html Receives ...... | ||
'''DSD Plus''' https://wiki.radioreference.com/index.php/DSDPlus | '''DSD Plus''' https://wiki.radioreference.com/index.php/DSDPlus | ||
Line 391: | Line 711: | ||
</pre> | </pre> | ||
---- | ---- | ||
+ | |||
=Digital Modes= | =Digital Modes= | ||
− | =DMR/ | + | =DMR/MotoTRBO= |
− | * [https://whistlergroup.com/pages/understanding-dmr-digital-mobile-radio Whistler DMR explanation] | + | * [https://whistlergroup.com/pages/understanding-dmr-digital-mobile-radio Whistler DMR explanation] [https://www.motorolasolutions.com/en_xu/solutions/what-is-dmr.html Motorola DMR Explanation] |
− | * [https://cwh050.mywikis.wiki/wiki/Main_Page Wiki | + | * [https://cwh050.mywikis.wiki/wiki/Main_Page Wiki related for personnel or hobbyists who work with Motorola Solutions' MOTOTRBO product portfolio] |
+ | * [https://northgeorgiacommunications.com/wp-content/uploads/2022/05/Motorola-MotoTRBO-System-Planner.pdf MotoTRBO System Planner (PDF)] | ||
+ | |||
+ | '''Modes''' | ||
+ | • Direct mode</br> | ||
+ | • Repeater mode</br> | ||
+ | • Through a repeater in conventional single site mode</br> | ||
+ | • IP Site system is configured through a set of repeaters in IP Site Connect Connect mode.</br> | ||
+ | ** Tait recommends not using simulcast in DMR. See [https://www.taitcommunications.com/hubfs/All%20PDFs/Products/DMR/DMR%20Simulcast%20Networks.pdf LINK (PDF)] | ||
+ | • Capacity Plus Single Site system is configured by trunking a set of repeaters in Capacity Plus Single Site mode.</br> | ||
+ | • Capacity Plus Multi Site system is configured by trunking a set of repeaters connected across multiple sites in Capacity Plus Multi Site mode.</br> | ||
+ | * Can be configured to operate in analog mode, digital mode, or in both modes | ||
+ | |||
+ | • Dynamic Mixed Mode (DMM), MOTOTRBO uses a pair of physical channels configured for 12.5 kHz channel bandwidth for digital operation and analog operation. The repeater dynamically switches between analog and digital modes based on the call it receives from radios. If an analog radio transmits, the repeater switches to analog mode to repeat the analog call. However, the repeater only repeats analog calls that are qualified by PL (DPL/TPL). If a digital radio transmits, then the repeater switches to digital mode to repeat the digital call if the call uses the right color code. While the repeater repeats one analog call at a time, it can repeat 2 digital calls at a time, one on each logical channel. | ||
+ | |||
+ | == Call Types == | ||
+ | * Group Call - Everyone on your "Channel" (talkgroup) can hear you and respond | ||
+ | * All Call - Everyone on your whole system can hear you and respond (Emergencies, etc.) [Capacity Plus or higher] | ||
+ | * Private Call - Find the employee in your contact list and call directly (Only you and the other radio can hear the call) [Capacity Plus or higher] | ||
+ | |||
+ | == Restricted Access to System (RAS) == | ||
+ | * Used by MOTOROLA systems only | ||
+ | * Information courtesy [https://cwh050.blogspot.com/2015/10/restricted-access-to-system.html DJOWH] | ||
+ | * This feature prevents unauthorized subscriber users from using the repeaters in the system. It also offers some protection to prevent unauthorized subscribers from listening to any repeater outbound voice/data transmission. | ||
+ | |||
+ | * RAS is not a privacy feature and if voice privacy is a concern, Basic Privacy, Enhanced Privacy, or AES should be used. It is supported in all MOTOTRBO system configurations – Conventional Single Site, IP Site Connect, Capacity Plus, and Linked Capacity Plus. | ||
+ | |||
+ | '''RAS provides two methods to prevent a subscriber from accessing the system:''' | ||
+ | * RAS Key Authentication // Radio ID Range Check | ||
+ | These two methods are independent of each other and may be enabled/disabled separately or together. When used together, they provide a robust and flexible way to control the users access to the system.</br> | ||
+ | |||
+ | === RAS on LCN decoding === | ||
+ | * Since RAS keeps unauthorized radios from accessing the system, it may also foul up your attempts to get a proper LSN/LCN for a CAP+/Tier III/CON+ system. | ||
+ | * [https://www.google.com/url?sa=t&source=web&rct=j&opi=89978449&url=http://forums.radioreference.com/threads/mototrbo-restricted-access-to-system-ras.279062/&ved=2ahUKEwj_hZ7ex7yFAxWsFzQIHdYZAZUQFnoECCEQAQ&usg=AOvVaw1ggfvS8IRIr2nclXP_PlFe RR Forum Post] | ||
+ | |||
+ | * Some DMR mobile radios can be set to "PROMISCUOUS" mode, which will allow you to LISTEN to the system. | ||
+ | |||
+ | == Rest Channel / Timeslot == | ||
+ | |||
==DMR Networks== | ==DMR Networks== | ||
+ | '''DMR Network Layout/Size''' | ||
* T (Tiny) S (Small) L (Large) H (Huge) | * T (Tiny) S (Small) L (Large) H (Huge) | ||
− | *Huge network model we can set up up to a total of 1024 sites | + | * Huge network model we can set up up to a total of 1024 sites |
+ | |||
+ | |||
+ | '''LRRP Data''' | ||
+ | * Location Request Response Protocol | ||
+ | * Uniden Scanners (x36 and SDS), LRRP will cause the scanner to falsely flag the system as "CAP". So some unsuspecting users may think a frequency is CAP+, and has the standard Cap+ beacons, when really it's just LRRP doing it's thing to confuse the easily confused Uniden scanners. [https://forums.radioreference.com/members/w1kne.274942/ Info courtesy W1KNE] | ||
+ | |||
+ | === Capacity Plus - Single Site (CPSS) === | ||
+ | * No trunking controller, the repeaters and subscribers contain all necessary trunking logic. 1 of the Repeaters will be a "Master" | ||
+ | * There is no dedicated Control Channel, instead a rolling "rest timeslot" is used | ||
+ | * A total of 20 networked devices on the site (repeaters, RDAC* or PCs) -- Up to 8 trunked repeaters (16 time slots) and 12 data revert repeaters. | ||
+ | <pre> | ||
+ | Data Revert - The GPS Revert Channel feature allows system to off load radio transmitted location updates onto a programmed digital channel that differs from the digital Selected Channel. This feature effectively removes Location Update traffic from the Selected Channel in order to free up that channel. The GPS Revert Channel also allows a large group to communicate on a single voice channel while sending location updates on multiple GPS Revert Channels to accommodate larger Location Update loads. | ||
+ | |||
+ | Each channel programmed into the radio has a configurable CPS option to designate the GPS transmission channel on which it transmits Location Update messages. The CPS options for the GPS transmission channel are Selected, All, and None. | ||
+ | |||
+ | - Choosing Selected means that the GPS updates are transmitted on the current channel. | ||
+ | |||
+ | - In the case of All, a single channel must be chosen from the list of all channels. This chosen channel is known as the GPS Revert Channel and this is where GPS updates are transmitted on. | ||
+ | </pre> | ||
+ | * Up to 255 talkgroups | ||
+ | * Rest Timeslot - Rest "Beacon" messages; when all timeslots are busy, the rest timeslot can be a voice timeslot | ||
+ | * "Channel Pool" Frequencies with times lots available. | ||
+ | * Terms: Personalities, Voice Lists, Subscriber Radio, "Slot ID" same as LSN, | ||
+ | * Polite vs Impolite - being able to talk over a radio already using the talkgroup | ||
+ | * Higher priority only to All Call and Emergency Calls (can trigger a channel to impolite) WILL NOT break into current conversations. | ||
+ | |||
+ | === Capacity Plus - Multiple Site (CPMS) === | ||
+ | May also be called '''MotoTRBO Linked Capacity Plus''' | ||
+ | * Multi-site dynamic trunking, large groups across a large area. through an IP | ||
+ | * Up to 15 locations with up to 8 repeaters on each site (16 timeslots), 1600 users on each site. Up to 11 (or 6) data revert per site (GPS, etc), | ||
+ | * Up to 255 talkgroups. Ideally can support 100 subscribers per slot. | ||
+ | * 1 master Repeaters with peers, If the master repeater goes down, the network picks up the rest, with a pair of timeslots probably missing | ||
+ | * The master repeater contains a list of rudimentary fleetmap that lists all of the sites in the system, and a list of the talkgroups, and which sites they should be networked to. | ||
+ | * All repeaters carry traffic from all talkgroups, unless it's turned off during setup. Some talkgroups may only be set to transmit on specified sites. | ||
+ | * Individual calls (Private Call/iCall) are only placed on the source and destination site. | ||
+ | * Location information not available, whether a radio is turned on and which site it is on. | ||
+ | |||
+ | * Main advantage is added subscriber capacity that has the ability to share calls across multiple sites. | ||
+ | * With IP Site-Connect Ability to link sites together that are on different bands (VHF, UHF, 800) | ||
+ | |||
+ | * Neighbors HAVE to have overlap coverage, for handing over during roaming | ||
+ | * Each site has to have it's own router/network, | ||
+ | * Adding more data radios or shortening the GPS update period could drive the need for more revert slot, or the need for enhanced GPS on the system | ||
+ | |||
+ | === Capacity Max === | ||
+ | * Dynamic Site Assignment, Call Queuing, Priority and preemption.(available on TIII or greater, not on capacity plus) | ||
+ | |||
+ | '''Hytera XPT''' | ||
+ | |||
+ | '''Tier III" | ||
+ | Non Standard vs Standard | ||
+ | |||
+ | === Connect Plus === | ||
+ | |||
+ | === TRBOnet Plus === | ||
+ | * Based on TRBOnet Enterprise, support for all TRBO systems; sold and supported by Motorola | ||
+ | * IP-based, integrated, AMBE vocoder, Modular based, Scalable, Direct IP interface to repeaters, remote administration | ||
+ | * GPS, Telemetry, Voice Recording, Automation, Fleet Management, Event logging, Text Messaging/Email, Job Ticketing, EBT, Phone Interconnect, Alarm Management, RF Coverage Management, Location Tracking, Indoor Positioning | ||
+ | * Multiple dispatch position, Each dispatcher can set up their position as they like | ||
+ | * System Bridging with 2 different system, Analog radios can migrate to the system | ||
+ | |||
+ | === JVCKenwood DMR-S Trunking === | ||
+ | * Information courtesy KD4EFM | ||
+ | * [https://forums.radioreference.com/threads/dmr-s-trunking-what-is-this-now.392176/ RR Thread on ] Up to 15 sites max, up to 8 repeaters per site | ||
+ | * S-Trunking is a JVCKenwood proprietary DMR-based TDMA Trunking system. | ||
+ | * There is support for DMR Tier 3 Trunking, and it's centralized trunking relay system that has exclusive control channel (FB8)*. | ||
+ | * Conforms to shared channel license environments, by: the TSCC is basically transmitted in intervals (data pulses). It negates interference to neighboring systems unlike the other equipment out there. | ||
+ | * Reference: ETSI TS 102 361-4 (DMR Tier III Trunking Systems) | ||
+ | * Shared channel (FB6) and Exclusive control channel (FB8) as defined by the FCC | ||
==TIER 3 Hytera== | ==TIER 3 Hytera== | ||
+ | |||
+ | == Tait Tier 2/3 IP-Based Simulcast == | ||
+ | * Tier2 | ||
+ | Simulcast achieves wide-area coverage with multiple (geographically separated) repeaters using the same receive and transmit frequencies. A digital voter is used on the receive sites to determine the best signal to relay. Simulcast is very useful when multiple frequency allocations may be hard to obtain, and reusing the same frequencies over a large area is more cost-effective. It also reduces channel changing and the number of re-registrations on a network.</br> | ||
+ | Simulcast can also be DIFFERENT frequencies as each site. This eliminates the chance for distortion between transmitting sites. </br> | ||
+ | |||
+ | * Tier3 Express (up to 6 simulcast sites) | ||
+ | * Tier3 Express20 (up to 20 simulcast sites with High Availability redundancy option) | ||
+ | * Tier3 Full Solution | ||
==DMR Tier III Motorola MOTOTRBO Capacity Max == | ==DMR Tier III Motorola MOTOTRBO Capacity Max == | ||
Line 425: | Line 863: | ||
''' [https://wiki.radioreference.com/index.php/FCC_Radio_Service_Codes FCC Radio Service Codes (RR Wiki)]''' | ''' [https://wiki.radioreference.com/index.php/FCC_Radio_Service_Codes FCC Radio Service Codes (RR Wiki)]''' | ||
---- | ---- | ||
+ | |||
+ | = NXDN = | ||
+ | * [http://www.nxdn-forum.com/what-is-nxdn/nxdn-a-brief-overview NXDN™: A brief overview | What is NXDN™ ? | NXDN Forum Website] | ||
+ | * [https://www.sigidwiki.com/wiki/Next_Generation_Digital_Narrowband_(NXDN) NXDN (sigidwiki.com)] [https://wiki.radioreference.com/index.php/NEXEDGE NEXEDGE (RadioReference)] [https://wiki.radioreference.com/index.php/NXDN NXDN (RadioReference) ['http://www.nxdn-forum.com/what-is-nxdn/technical-specifications-of-nxdn/ NXDN Forum] | ||
+ | |||
+ | * NXEDGE 12.5KHz/9600baud NXDN is called "Narrow NXDN" in the programming software. (*Kenwood language) | ||
+ | * Icom's iDAS: 6.25KHz/4800baud NXDN is called "Very Narrow NXDN" in the programming software. (*Kenwood language) | ||
+ | |||
+ | * RAN (pronounced "ran" or "R" "A" "N" | ||
+ | |||
+ | * Some of the very low end commercial/business radios that Kenwood sold would only do 4800NXDN. | ||
+ | * Very Narrow NXDN tends to have a bit better coverage. It uses 6.25KHz wide channels, so it's easy to stick it in between other users. | ||
+ | Narrow NXDN tends to not have quite as good coverage, but it benefits from having a wider channel/higher data rate, so if you are using the radios to transmit data, video, GPS location, etc. it can be a better choice. [https://forums.radioreference.com/threads/diff-nxdn-nexedge-4800-nxdn-nexedge-9600.343898/ Discussion] | ||
+ | |||
+ | NXDN uses FDMA, and a NXDN channel be either 12.5 kHz or 6.25 kHz wide. 6.25 kHz dual-channel systems can be configured to fit within a 12.5 kHz channel. This effectively doubles the spectrum efficiency compared to an analog FM system occupying a 12.5 kHz channel. The architecture of NXDN is such that two NXDN channels, within a 12.5 kHz channel for example, can be allocated as voice/voice, voice/data, or data/data. | ||
+ | |||
+ | Kenwood's brand for NXDN equipment is "NEXEDGE", while Icom's brand for NXDN equipment is "IDAS", or Icom Digital Advanced System. | ||
+ | |||
+ | '''NXDN 6.25 kHz (iDAS)''' | ||
+ | * Vocoder AMBE+2 | ||
+ | * Codec Rate 3600 bps | ||
+ | * Transmission Rate 4800 bps | ||
+ | * Modulation 4-level FSK | ||
+ | * Peak deviation 1.05 kHz | ||
+ | * Symbol Deviation: 01 +3 +1050 Hz, 00 +1 +350 Hz, 10 –1 –350 Hz, 11 –3 –1050 Hz | ||
+ | |||
+ | Emission designators</br> | ||
+ | * 4K00F1D 6.25 kHz single channel digital data (NEXEDGE) | ||
+ | * 4K00F1E 6.25 kHz single channel digital voice (NEXEDGE) | ||
+ | * 4K00F1W 6.25 kHz single channel digital voice and data (NEXEDGE) | ||
+ | * 4K00F7W voice & data ??? | ||
+ | * 4K00F2D 6.25 kHz single channel analog CW ID (NEXEDGE) | ||
+ | |||
+ | '''NXDN 12.5 kHz (NEXEDGE)''' | ||
+ | * Vocoder AMBE+2 | ||
+ | * Codec Rate 7200 bps | ||
+ | * Transmission Rate 9600 bps | ||
+ | * Modulation 4-level FSK | ||
+ | * Peak deviation 2.4 kHz | ||
+ | * Symbol Deviation: 01 +3 +2400 Hz, 00 +1 +800 Hz, 10 -1 -800 Hz, 11 -3 -2400 Hz | ||
+ | |||
+ | Emission designators</br> | ||
+ | * 4K00F2D CW ID | ||
+ | * 8K30F1D 12.5 kHz single channel digital data (NEXEDGE) | ||
+ | * 8K30F1E 12.5 kHz single channel digital voice (NEXEDGE) | ||
+ | * 8K30F1W 12.5 kHz single channel digital voice and data (NEXEDGE) | ||
+ | * 8K30F7W voice & data | ||
+ | |||
+ | ===iDas=== | ||
+ | * 3 types of systems: Single site, Multisite system linking multiple sites together, and a intersystem system linking multiple multisite as one. | ||
+ | * [https://wiki.radioreference.com/index.php/IDAS IDAS (RadioReference] [https://forums.radioreference.com/threads/understanding-idas-trunking.298002/ Understanding iDAS thread] | ||
+ | |||
+ | * System ID has an Integrator Code (0 to 15) and System Code (0 to 32767) [default 1-1] | ||
+ | * Site IDs have a range of 1 to 250; 0 and 251 to 255. are reserved | ||
+ | |||
= P25 (APCO P25) = | = P25 (APCO P25) = | ||
+ | * [https://en.wikipedia.org/wiki/Project_25 P25 (Wikipedia)] | ||
+ | * [https://www.dhs.gov/science-and-technology/p25-cap Project 25 Compliance Assessment Program] (P25 CAP) | ||
+ | * [https://cdn.codancomms.com/general-downloads/Products/User-Guides/Codan_TG-001-4-0-0-P25-Training-Guide.pdf Codan Communications P25 Systems Training Guide] | ||
− | * [https://www. | + | == Phase 1 vs Phase 2 == |
+ | * FDMA - Frequency Division Multiple Access - Original phase 2 application of splitting a 12.5 kHz frequency into 2 6.25 kHz slots | ||
+ | * TDMA - Time Division Multiple Access (Note: DMR is also TDMA) Splitting a 12.5kHz frequency into 2 faster data rates to create 2 "slots" | ||
+ | * C4FM - Continuous 4 level FM modulation—a special type of 4FSK modulation—for digital transmissions at 4,800 baud and 2 bits per symbol | ||
+ | * CQPSK - Compatible quadrature phase shift keying (C4FM receivers can demodulate) | ||
+ | |||
+ | === Phase 1 === | ||
+ | * 12.5 kHz digital mode, single user per channel access, using C4FM | ||
+ | |||
+ | * Many talkgroups may use Dynamic Dual Mode, which allows the talkgroup to automatically switch to TDMA (Phase II) when only TDMA-capable subscriber radios are active on the talkgroup, but will revert to Phase I when older radios (not P2 capable) are active on the talkgroup. As a result, many talkgroups in "D" Mode (Phase I) may intermittently become T (TDMA, Phase II) and only be monitored on a Phase II capable scanner at any time. | ||
+ | |||
+ | === Phase 2 === | ||
+ | * The P25 Phase 2 Standards are based on a two-slot TDMA channel access method within 12.5 kHz channel bandwidth and is used for P25 trunking systems. P25 Phase 2 two-slot TDMA trunking is an | ||
+ | addition to the P25 Standard and does not replace P25 Phase 1 FDMA. The P25 two-slot TDMA for Phase 2 doubles the spectrum efficiency of Phase 1 (12.5 kHz). | ||
+ | * The P25 Phase 2 TDMA CAI uses two different modulation schemes for over-the-air transmission of the 12 kbps data stream, Harmonized Continuous Phase Modulation (H-CPM), is a common constant- | ||
+ | envelope non-linear modulation and is transmitted by the subscriber equipment. Harmonized Differential Quadrature Phase Shift Keyed modulation (H-DQPSK), is a non-coherent modulation scheme and is | ||
+ | transmitted by the fixed site equipment. | ||
+ | * A P25 Phase 2 FDMA solution was finalized (CQPSK), but never widely used | ||
+ | (information above by Coden***) [https://cdn.codancomms.com/general-downloads/Products/User-Guides/Codan_TG-001-4-0-0-P25-Training-Guide.pdf See Page 96 for pictorial] | ||
+ | |||
+ | '''Phase 2 Control Channels''' | ||
+ | * Some of the newest Phase 2 trunk system have a Phase 2 control channel, meaning that the other slot can be used for a voice slot. Most Phase 2 and all phase 1 systems, the control channel information takes up the whole bandwidth/rate of the frequency. | ||
+ | |||
+ | * The P25 Phase 2 trunking system uses an FDMA Phase 1 Control Channel (with TDMA extensions / advanced signaling) for all registration, channel access and other system control. Two-slot TDMA channels are used for voice traffic channels, and FDMA channels are used for data traffic channels. The Phase 2 subscribers request a voice traffic channel by communicating with the TRC on the control channel using advanced signaling (over Phase 1) to identify the TDMA time slots. | ||
+ | * A P25 Phase 2 two-slot TDMA fixed site trunking system and subscribers will support the Phase 1 CAI. This facilitates interoperability among multiple manufacturers’ equipment, migration planning from Phase 1 FDMA to Phase 2 two-slot TDMA, and inter-system roaming, according to network operator requirements | ||
+ | |||
+ | === P1 vs P2 === | ||
+ | * P2 radios can revert to P1 as needed, by P1 radios can NOT access P2 | ||
+ | * P1 is used by most(?) conventional, is used by trunking. P2 is usually only used in trunking applications | ||
+ | * Any manufacturer of P25 should be backwards compatible and offer interoperability with other P25 vendors | ||
+ | |||
+ | #########################NEW INFO | ||
+ | Phase 1 - radio systems operate in 12.5 KHz analog, digital or mixed mode. Phase 1 radios use Continuous 4 level FM (C4FM) non-linear modulation for digital transmissions. Phase 1 P25 compliant systems are backward compatible and interoperable with legacy systems, across system boundaries, and regardless of system infrastructure. In addition, the P25 suite of standards provides an open interface to the RF subsystem to facilitate interlinking of different vendors’ systems. | ||
+ | Phase 2 - radio systems will achieve one voice channel or a minimum 4800 bps data channel per 6.25 kHz bandwidth efficiency. The P25 Phase 2 FDMA solution is finalized (CQPSK), and an alternate TDMA solution | ||
+ | is currently under development. Phase 2 implementation achieves the goal of improved spectrum utilization. Also being stressed are such features as interoperability with legacy equipment, interfacing between repeaters and other sub-systems, roaming capacity and spectral efficiency/channel re-use. | ||
+ | Phase 3 - Implementation of Phase 3 will address the need for high-speed data for public-safety use. Activities will encompass the operation and functionality of a new aeronautical and terrestrial wireless digital wideband/broadband public safety radio standard that can be used to transmit and receive voice, video and high-speed data in wide area, multiple-agency networks. The European Telecommunications Standards are working collaboratively on Phase 3, known as Project MESA (Mobility for Emergency and Safety Applications). Current P25 systems and future Project MESA technology will share many compatibility requirements and functionalities | ||
+ | |||
+ | === NAC=== | ||
+ | * NAC is the Network Access Code, somewhat similar to PL tones or DPL tones used on analog (4096 codes available to use) (range of $000 to $FFF) | ||
+ | * Unlike most other applications, NAC is referred to by the HEX (hexadecimal) number. These will either be shown with "NAC" or preceded by a dollar sign ($) | ||
+ | * Used on conventional simplex, repeaters and simulcast systems. | ||
+ | * Used on trunked systems. Usually each site is assigned a "unique"* NAC (however it can be reused in the system elsewhere) [Each frequency on the site will use the same NAC] | ||
+ | * Note: No need to say "NAC code" and "NAC tone" is not appropriate. | ||
+ | |||
+ | '''Optional NAC''' | ||
+ | * $293 - Default code used by manufacturers, many interop channels | ||
+ | * $F7E - A receiver will pass through ANY NAC received (but the transmitter will use it's programmed NAC) | ||
+ | * $F7F - A receiver will pass through ANY NAC received and the repeater will transmit THAT NAC | ||
+ | |||
+ | ==P25 Data== | ||
+ | * Data can be streamed...... | ||
+ | |||
+ | ==P25 Conventional== | ||
+ | |||
+ | '''Simulcast Repeaters (Conventional)''' | ||
+ | |||
+ | === P25 Conventional Talkgroups (P1) === | ||
+ | * Most conventional P25 systems are using a talkgroup, along with the NAC. Some systems have even have more than 1 talkgroup, but, for example, talkgroup 1 may have priority over the other talkgroups. | ||
+ | * 1, 2, 3 (Routine Group Call) (1 is the default on Motorola systems) | ||
+ | * 4095 Motorola DIU (Digital Interface Unit), often a phone patch | ||
+ | * 65535 (Routine Group Call) (usually the default on other vendor systems) | ||
+ | * Unit-to-Unit / Individual Call (will show the RIDs of each radio as the talkgroup) | ||
+ | * '''Programming''' You may need to program your scanner as a "P25 One Freq" to receive talkgroups. You'll need to use "P25 One Freq" to add and assign RIDs aliases. | ||
+ | |||
+ | === Unit ID (UIDs) / Radio IDs (RID) === | ||
+ | * Used on both Conventional and Trunked. Some trunked radios can assign a separate RID for each P25 trunked system that they can access | ||
+ | |||
+ | '''Specific Functions''' | ||
+ | * $000000 -- No-one. This value is never assigned to a radio unit | ||
+ | * $000001 to $98967F for general use. | ||
+ | * $989680 to $FFFFFE for talk group use or other special purposes. | ||
+ | * $FFFFFF -- Designates everyone. Used when implementing a group call with a TGID | ||
+ | |||
+ | == P25 Options == | ||
+ | === P25 Encryption === | ||
+ | * User selectable or strapped (can not turn off). Also see [https://www.michigan.gov/mpscs/-/media/Project/Websites/MPSCS/Interoperability-Board/Work-Groups/Encryption/Docs/Encryption-Best-Practices.pdf?rev=18ffef2180314b2ab44d45e94900fe0f&hash=2E0A34B129A3E59531F1883E4A129E6F Michigan MPSCS Encryption Recommendations and Best Practices] [https://ioem.idaho.gov/wp-content/uploads/2021/01/7-Idaho-Encryption-Guide_Approved-Final_07JAN21.pdf Idaho Encryption Guidance (PDF)] [https://www.cisa.gov/safecom/blog/2016/10/12/fpic-releases-encryption-documents FPIC Encryption documents] [https://www.cisa.gov/publication/encryption Cybersecurity & Infrastructure Security Agency (CISA) documents] | ||
+ | |||
+ | '''There are three different states for encryption:''' | ||
+ | • Clear is used when there is no encryption on the talkgroup and the encryption cannot be | ||
+ | turned on. | ||
+ | • Selectable can be used to turn encryption on or off using a switch or button or other radio | ||
+ | feature selectable setting. | ||
+ | • Strapped (Secure) is used when the talkgroup is always encrypted and cannot be turned off. | ||
+ | |||
+ | * Encryption Key | ||
+ | |||
+ | * Applies to both trunking and conventional systems, as well as voice messages and data packets. The IMBE™ vocoder produces a digital bit stream for voice messages that is relatively easy to encrypt. Major advantages of the P25 encryption design are that encryption does not affect speech intelligibility nor does it affect the system’s usable range. Both of these advantages are major improvements over encryption previously used in analog systems. | ||
+ | * Encryption requires that both the transmitting and the receiving devices have an encryption key, and this key must be the same in each unit. This may be done using a Key Loader. Most P25 subscriber equipment is optionally available with the capability of storing and using multiple keys. That is, a unit could use one key for one group of users and use a separate key for another group of users. System management of keys may be done in a Key Management Facility, or KMF. | ||
+ | |||
+ | * The traffic channels of a trunked system can be encrypted in the same manner as a conventional system encrypted system, using the Algorithm ID, Key ID and Message Indicator for encryption variables. The control channel of a trunked system may also be optionally encrypted. In a TSBK message, the Opcode and Arguments may be encrypted and the Protected trunking block flag (P) is set to indicate encryption. In an MBT message, the Logical Link ID, (and in the alternate header format, the Opcode and Octets 8 and 9) as well as all Data (except the CRC) may be encrypted, and the SAP Identifier is set to indicate encryption. | ||
+ | |||
+ | ;Types of P25 Encryption | ||
+ | * In the U.S. there are four general “types” of encryption algorithms. '''Type 1''' is for U.S classified material (national security), '''Type 2''' is for general U.S federal interagency security, '''Type 3''' is interoperable interagency security between U.S. Federal, State and Local agencies, and '''Type 4''' is for proprietary solutions (exportable as determined by each vendor and the U.S. State Department). The CAI supports use of any of the four types of encryption algorithms. P25 documents currently standardize two different Type 3 encryption processes. One encryption process is the U.S. Data Encryption Standard, or DES algorithm, which uses 64 bit Output Feed Back and is denoted as DES-OFB. Another encryption process is the Advanced Encryption Standard (AES) which is a 256 bit algorithm. | ||
+ | * P25 also includes a standardized Over The Air Rekeying (OTAR) function. OTAR is a way to greatly increase the utility of encryption systems by allowing transfer of encryption keys via radio. This remote rekey ability, controlled from a Key Management Facility, or KMF, means that radios no longer have to be physically touched in order to install a new or replacement key into a radio. OTAR signaling is sent as Packet Data Units over the Common Air Interface. | ||
+ | * Optionally, multiple encryption keys can be stored in P25 radio equipment. In order to identify the keys, they are stored with an associated label called a Key Identifier or KID. The type of algorithm to be used with the key is identified by an Algorithm ID or ALGID. | ||
+ | |||
+ | ;Types of Encryption Algorithms | ||
+ | • ADP (Advanced Digital Privacy)/ARC4 Low security encryption. Usually loaded in template but can be loaded with keyloader. | ||
+ | • DES-OFB (Digital Encryption Standard Output Feed Back) Medium security encryption that is usually loaded with keyloader but can be loaded with software. | ||
+ | • AES256 (Advanced Encryption Standard) High security (Federal Grade) encryption that can be loaded with keyloader or software (in some radios). | ||
+ | |||
+ | === P25 Emergency Switch === | ||
+ | * The Emergency switch will allow the user to assert the emergency condition. Once asserted, the emergency condition remains active until cleared by some other means (eg. turning the radio off) | ||
+ | * EBT - Emergency Button | ||
+ | * May be on a separate talkgroup | ||
+ | |||
+ | === P25 Conventional Control Messages === | ||
+ | * '''Emergency Alarm''' is activated by a user to inform the dispatcher an emergency situation is encountered. The Emergency Alarm is typically used in a life threatening situation. | ||
+ | * '''Call Alert''' sends a data packet to the destination subscriber identifying the source of the Call Alert and requesting the destination to contact the source. Call Alert is typically used if the destination subscriber | ||
+ | did not respond to a voice message from the source. | ||
+ | * '''Radio Check''' is used to determine if a specific subscriber is currently available on the radio system. A response to the Radio Check is required, or the system will assume the subscriber is not available | ||
+ | * '''Radio Inhibit (Radio Uninhibit)''' is used to deny all calls between the inhibited subscriber and the RFSS. Radio Uninhibit cancels the inhibit status of the subscriber | ||
+ | * '''Status Update''' is used by a subscriber to indicate its current status (user and unit status) to a designated target address. Status Request is used by a subscriber to request the current status of a specified subscriber. | ||
+ | * '''Message''' May be sent by a subscriber or the RFSS to send a short message to another subscriber. | ||
+ | * '''Telephone Interconnect Dialing''' will allow a subscriber to initiate a Unit to PSTN call, and will allow a telephone network to initiate PSTN to Group and PSTN to Unit calls. | ||
+ | * '''Radio Unit Monitor''' is used to cause a subscriber radio to key up when requested to do so by a dispatcher. Allows a dispatcher to listen to activity at the location of the subscriber. | ||
+ | |||
+ | === P25 Location Services === | ||
+ | * Location Services, such as GPS, provide a method of supplying a Location Service Host System (mapping software for example) with the location of subscriber units within a P25 Radio System coverage area. The Location Services can include information such as latitude, longitude, altitude, Coordinated Universal Time (UTC), GPS quality, and many other location information messages. The P25 standards break the location services into two tiers of service, Tier 1 and Tier 2. | ||
+ | * '''Tier 1''' is a simple subscriber to subscriber interface for Conventional direct (talkaround) or repeated radio signals, without providing IP addressing, fixed host routing, or more advanced configuration of triggering and reporting. | ||
+ | * '''Tier 2''' is a request/response protocol that allows an LSHS to make a request for location information from a subscriber unit or Mobile Data Peripheral (MDP), and to receive a response from the subscriber | ||
+ | immediately, periodically or under various triggering conditions. The information can be transmitted between subscribers in Conventional direct (talkaround) or repeated mode, or between a subscriber and a Fixed Data Host (FDH) in Conventional or Trunked Fixed Data mode. Tier 2 is used where there is the necessary infrastructure to allow routing and transport in a customer data network using IPv4. The Tier 2 approach utilizes Location Request/Response Protocol (LRRP) across the P25 Packet Data Service to transport UDP/IP addressed location information packets from the LSHS to the subscriber, and to transport location information from the subscriber to the LSHS. LRRP is an XML-based protocol, and uses Efficient XML Interchange (EXI) compression for efficient transmission over the Common Air Interface | ||
+ | |||
+ | === P25 Over The Air Rekeying (OTAR) === | ||
+ | * OTAR is the ability to rekey the radio over the system without the use of a keyloader. This provides the ability to issue a new key quickly and without the possibility of missing radios or having older keys that | ||
+ | don't work. This should be used to eliminate the possibility of a lost or stolen key or if constant key updates are needed for secure communication. | ||
+ | |||
+ | * (encryption) P25 also includes a standardized Over The Air Rekeying (OTAR) function. OTAR is a way to greatly increase the utility of encryption systems by allowing transfer of encryption keys via radio. This remote rekey ability, controlled from a Key Management Facility, or KMF, means that radios no longer have to be physically touched in order to install a new or replacement key into a radio. OTAR signaling is sent as Packet Data Units over the Common Air Interface. | ||
+ | |||
+ | == P25 Trunking == | ||
+ | * System/Network ID (NID) - $001 to $FFE | ||
+ | * WACN - $00001 to $FFFFE | ||
+ | * RFSS - $01 to $FE | ||
+ | * Site ID - $01 to $FE | ||
+ | |||
+ | ;INTRODUCTION TO P2 5 T R U N K I N G | ||
+ | * In a conventional radio system, the operation of the system is controlled by the radio users, whereas in a trunked system the management of system operation, including call routing and channel allocation, is automatic. A trunking system is basically a group of communications channels automatically sharing among a large group of users. The users request access to the communication channels (also called traffic channels), and a trunking controller (also referred to as FNE – Fixed Network Equipment) grants access to the traffic channels. In a conventional system (non-trunked), the users control their own access to the traffic channels by direct selection of frequencies or channels. | ||
+ | * P25 trunking standards specify a control channel, and one or more traffic channels. The control channel can be a dedicated control channel, or optionally, a composite control channel. A dedicated control channel will operate as a control channel only, where a composite control channel can operate as a control channel or as a traffic channel when all other traffic channels are busy. A secondary control channel can also be specified, to be used when the primary control channel is unavailable. | ||
+ | * The P25 trunking standards and P25 digital conventional standards use identical modulation (C4FM), bit rate (9600 bps), voice messages (CAI), and control messages (data packets) for various features, including voice, data, status, message, or other features. The Common Air Interface for both trunking and conventional P25 digital systems is similar. The only difference is that the trunked version requires a command/response process to a trunking controller (on a control channel) using packet access techniques which coordinates the users’ access. | ||
+ | |||
+ | ;IMPLICIT / EXPLICIT | ||
+ | * A P25 trunked system can be configured in either the implicit mode or the explicit mode of operation. In the implicit mode of operation, all radios are pre-programmed with the channel and frequency information. The radio then looks internally to the pre-programmed channels when switching between control and traffic channels. The explicit mode sends the channel and transmit or receive frequency over the air to the radio. The implicit mode of operation typically uses single block messages, where the explicit mode typically uses multi block messages | ||
+ | |||
+ | ;Registration | ||
+ | The subscriber unit (mobile or portable radio unit) registers with the network whenever the subscriber is turned on or moves into a new zone. Registration ensures that only authorized users access the network, and that the network can track where the subscriber is located | ||
+ | |||
+ | === Trunking Talkgroups (Working Group ID/WGID) === | ||
+ | * TGID (talkgroup ID) ranges from hexadecimal $0000 to $FFFF and contains 65,536 addresses. These are usually referred to in DECIMAL in the scanning community | ||
+ | * $FFFF == All call group | ||
+ | * Announcement Group Call | ||
+ | * Unit-to-PSTN | ||
+ | * Unit-to-Unit | ||
+ | *************************************************############################### | ||
+ | '''The following TGID’s have specific functions:''' | ||
+ | * $0000 -- No-one or a talkgroup with no users. Used when implementing an individual call. | ||
+ | * $0001 -- Default TGID value and should be used in systems where no other talkgroups are defined. | ||
+ | * $0001 thru $FFFE - Assignable working group | ||
+ | * $FFFF -- Reserved as a talkgroup which includes everyone | ||
+ | |||
+ | '''The three main types of voice message calls are:''' | ||
+ | * Routine Group Call This is the most common type of call and is intended for a group of users within the radio system. This type of call is typically initiated by asserting the PTT switch. | ||
+ | * Emergency Group Call This type of call is similar to a Routine Group Call, but is used during an emergency condition. An emergency condition is defined by the radio system users This type of call is typically initiated by asserting the Emergency switch. | ||
+ | * Individual Call -- As addressed to a specific individual. The caller enters the subscribers Unit ID, that they wish to call, and this is used as the Destination ID by the radio making the call. This type of call is made after the Destination ID is entered into the radio | ||
+ | |||
+ | |||
+ | === Analog vs. P25 === | ||
+ | * '''Transition''' - P25 equipment can be used in any configuration that is typically found in existing analog systems. Base Stations, remote bases, repeaters, voting, and simulcast systems are all configurations of P25 conventional systems. Transmitter RF power output levels and receiver sensitivity levels of P25 equipment are very similar to those of conventional analog equipment. P25 equipment can therefore be used in a “one-for-one replacement” scenario of analog equipment. | ||
+ | |||
+ | ;ANALOG VS. P25 DIGITAL COVERAGE | ||
+ | * There is much discussion about the RF coverage area of an analog radio signal versus a digital radio signal. In theory, a P25 digital radio signal will allow for a slightly greater coverage area when placed in the same location as an analog radio. There are some factors, however, that may interfere with the digital signal to a greater degree than the interference to an analog signal. | ||
+ | * P25 Phase 1 uses C4FM modulation. Because C4FM is a constant amplitude modulation, it allows use of nonlinear power amplifiers. Use of nonlinear amplifiers results in digital equipment that produces RF power levels that are equal to the power levels of current analog equipment. Systems can be implemented with little or no loss of coverage. An analog transmitter can be replaced with a P25 Phase 1, digital transmitter that produces the same transmitter output level of the analog transmitter. This is currently not necessarily true for higher power analog systems that are replaced by some TDMA systems when bandwidth of the resultant signal is a critical issue | ||
+ | * See more on page 49 at [https://cdn.codancomms.com/general-downloads/Products/User-Guides/Codan_TG-001-4-0-0-P25-Training-Guide.pdf Codan Training Guide] | ||
− | == | + | === P25 Failsoft === |
+ | * In P25 trunking applications, P25 Failsoft allows a dispatcher to continue voice communication during degraded P25 system operation. | ||
+ | * When a site fails, designated repeaters enter the Failsoft state which allows the console and affected radios to continue communicating using Failsoft channels in conventional mode. Failsoft operation supports Conventional Group Calls, PTT ID/ANI Alias, Emergency Calls/State, Late Entry, Call Alert, and Console-Controlled Encryption. | ||
− | == P25 Trunked on VHF == | + | === P25 Trunked on VHF === |
[[File:Moswin sm.png|600px|thumb|right|MOSWIN]] | [[File:Moswin sm.png|600px|thumb|right|MOSWIN]] | ||
+ | |||
=== [https://www.radioreference.com/db/sid/6847 Missouri Statewide Wireless Interoperable Network (MOSWIN)] === | === [https://www.radioreference.com/db/sid/6847 Missouri Statewide Wireless Interoperable Network (MOSWIN)] === | ||
* For Example,, in Missouri [https://dps.mo.gov/dir/programs/intercomm/docs/Project25.pdf P25 PDF] | * For Example,, in Missouri [https://dps.mo.gov/dir/programs/intercomm/docs/Project25.pdf P25 PDF] | ||
Line 440: | Line 1,110: | ||
* This specific method of granting a channel is a more extensive process for the network’s Control Channel than in implicit trunking, where the channel pairings are standardized and a reduced amount of messaging on the Control Channel dedicated to channel granting is required for each channel assignment. In addition to the above criteria, subscriber units proposed for use on MOSWIN need to be tested on the MOSWIN network to ensure consistent operation. Experience in other states, using both VHF High Band and 700/800 MHz Wide Area trunked systems, indicates that field testing of subscriber units prior to system certification is necessary to ensure that the full functionality of the subscriber is achievable and expectations of the users are verified. Those field tests include roaming throughout a system to ensure the subscriber transfers across all the zones of a system and we look forward to working with the vendor community on developing those tests. | * This specific method of granting a channel is a more extensive process for the network’s Control Channel than in implicit trunking, where the channel pairings are standardized and a reduced amount of messaging on the Control Channel dedicated to channel granting is required for each channel assignment. In addition to the above criteria, subscriber units proposed for use on MOSWIN need to be tested on the MOSWIN network to ensure consistent operation. Experience in other states, using both VHF High Band and 700/800 MHz Wide Area trunked systems, indicates that field testing of subscriber units prior to system certification is necessary to ensure that the full functionality of the subscriber is achievable and expectations of the users are verified. Those field tests include roaming throughout a system to ensure the subscriber transfers across all the zones of a system and we look forward to working with the vendor community on developing those tests. | ||
* The Missouri Department of Public Safety anticipates developing a certification process in which subscriber units from multiple manufacturers can be approved to operate on MOSWIN. Any additional questions on the MOSWIN Project 25 requirements listed above, contact Stephen Devine at 573-522-2382 stephen.devine@dps.mo.gov | * The Missouri Department of Public Safety anticipates developing a certification process in which subscriber units from multiple manufacturers can be approved to operate on MOSWIN. Any additional questions on the MOSWIN Project 25 requirements listed above, contact Stephen Devine at 573-522-2382 stephen.devine@dps.mo.gov | ||
+ | |||
+ | == P25 IntelliRepeater (Trunking) == | ||
+ | * [https://cybercomminc.com/product/gtr-8000-expandable-site-subsystem/ GTR-8000] Turnkey ASTRO 25 RF Site | ||
+ | |||
+ | An IntelliRepeater is a trunked repeater with built-in capabilities to perform the trunking functions without the need for a site controller. Any IntelliRepeater at a site can provide this capability if a station was to fail. This eliminates the need for central controllers at every site, while still providing full system capabilities. | ||
+ | |||
+ | = Other Digital Standards = | ||
+ | ==TETRA== | ||
+ | * A number of European countries submitted TETRA to ITU-R Working Party 8A on behalf of ETSI (the European Telecommunication Standards Institute). TETRA’s primary mode uses /4DQPSK modulation that requires a linear or linearized amplifier and fits four-slot TDMA within a 25 kHz channel mask. | ||
+ | |||
+ | * [https://www.powertrunk.com/docs/Pros_and_Cons_of_P25_vs_TETRA.pdf Pros and Cons of TETRA vs. P25 (PDF)] | ||
+ | |||
+ | == IDEN/DIMRS == | ||
+ | * Canada submitted DIMRS to ITU-R Working Party 8A. It is a six-slot TDMA system using 16QAM modulation that fits within a 25 kHz channel mask. It is designed primarily for public systems and is in use in a number of countries around the world. Motorola Inc. is the principal manufacturer of this equipment, under the name IDEN™ | ||
+ | |||
+ | ==Cellular Networks == | ||
+ | |||
+ | === FirstNet === | ||
+ | * Public Safety Nationwide Coverage | ||
+ | |||
+ | === NexTel === | ||
+ | * History | ||
+ | |||
+ | === Early Mobile Phones === | ||
+ | * 800 MHz/Scanners | ||
+ | * Banning of devices that can monitor cellular communications | ||
+ | ---- | ||
= SEARCHING FOR FCC LICENSES = | = SEARCHING FOR FCC LICENSES = | ||
Line 456: | Line 1,153: | ||
* [https://wireless2.fcc.gov/UlsApp/UlsSearch/searchGmrs.jsp GMRS License Search "ZA"] | * [https://wireless2.fcc.gov/UlsApp/UlsSearch/searchGmrs.jsp GMRS License Search "ZA"] | ||
− | [https://wireless2.fcc.gov/UlsApp/UlsSearch/searchAircraft.jsp FCC Aircraft Search] | + | * [https://wireless2.fcc.gov/UlsApp/UlsSearch/searchAircraft.jsp FCC Aircraft Search] |
* [https://wireless2.fcc.gov/UlsApp/UlsSearch/searchShip.jsp FCC Ship Search] | * [https://wireless2.fcc.gov/UlsApp/UlsSearch/searchShip.jsp FCC Ship Search] | ||
− | * [ | + | * [https://www.fcc.gov/licensing-databases/commission-registration-system-fcc FCC Registration System (CORES)] |
* See also: [https://www.npstc.org/fccFieldOffices.jsp FCC Field Offices] | * See also: [https://www.npstc.org/fccFieldOffices.jsp FCC Field Offices] | ||
+ | |||
+ | * Federal Government frequencies are NOT available for searching. NTIA | ||
+ | National Telecommunications and Information Administration https://www.ntia.gov/page/united-states-frequency-allocation-chart | ||
+ | https://www.ntia.doc.gov/files/ntia/publications/redbook/2012-05/7_12.pdf | ||
+ | https://www.gao.gov/assets/gao-22-105221.pdf | ||
== Searching for Mass Media / TV & Radio Stations == | == Searching for Mass Media / TV & Radio Stations == | ||
Line 483: | Line 1,185: | ||
* Antennas on a vehicle or at a building/tower site https://forums.radioreference.com/threads/identifying-unused-antennas-at-tower-site.467317/ | * Antennas on a vehicle or at a building/tower site https://forums.radioreference.com/threads/identifying-unused-antennas-at-tower-site.467317/ | ||
---- | ---- | ||
− | === Towers in your areas === | + | === (Radio) Towers/Transmitter Sites in your areas === |
* Try this to locate towers in your locale. | * Try this to locate towers in your locale. | ||
− | * [ | + | * [https://wireless2.fcc.gov/UlsApp/AsrSearch/asrRegistrationSearch.jsp Antenna Structure Registration (ASRN) Records Within A Radius] |
* [https://www.antennasearch.com/ AntennaSearch.com] Search for Cell Towers and Antennas | * [https://www.antennasearch.com/ AntennaSearch.com] Search for Cell Towers and Antennas | ||
* [https://www.cellmapper.net/map Cellular Tower Locater/Mapper] | * [https://www.cellmapper.net/map Cellular Tower Locater/Mapper] | ||
Line 509: | Line 1,211: | ||
* P25 on above | * P25 on above | ||
* DMR on above (MOTOTRBO) | * DMR on above (MOTOTRBO) | ||
− | * NXDN on above ( | + | * NXDN on above (NEXEDGE) |
* Using "ONE FREQ DMR" or "ONE FREQ NXDN" or "ONE FREQ P25" on capable Uniden scanners | * Using "ONE FREQ DMR" or "ONE FREQ NXDN" or "ONE FREQ P25" on capable Uniden scanners | ||
Line 522: | Line 1,224: | ||
462.0375 467.0375 WRCR799 RM CC 15|TG 4|SL 1 Lodge Ch 4 Operations (Ch 4) DMR Business</pre> | 462.0375 467.0375 WRCR799 RM CC 15|TG 4|SL 1 Lodge Ch 4 Operations (Ch 4) DMR Business</pre> | ||
* I would keep an eye on the slots. It's very possible that the talkgroups can be used on either slot. | * I would keep an eye on the slots. It's very possible that the talkgroups can be used on either slot. | ||
− | * For example Ch. 4 has traffic, which is on SLOT 1, then Ch.2 wants to talk at the same time, ...It will go on SLOT 2, while SLOT 1 is still carrying the traffic on Ch 4. Ch 4 could stop for a second and Ch 2 could switch to SLOT 1. While Ch. 2 is on SL1, Ch. 4 starts back up again and will | + | * For example Ch. 4 has traffic, which is on SLOT 1, then Ch.2 wants to talk at the same time, ...It will go on SLOT 2, while SLOT 1 is still carrying the traffic on Ch 4. Ch 4 could stop for a second and Ch 2 could switch to SLOT 1. While Ch. 2 is on SL1, Ch. 4 starts back up again and will use SL2 (if they both are still carrying traffic) |
== Trunked Systems == | == Trunked Systems == | ||
− | Motorola Type II (Legacy) | + | * Motorola Type II (Legacy) |
− | EDACS (Legacy) | + | * EDACS (Legacy) |
− | LTR (Legacy) | + | * LTR (Legacy) |
− | APCO P25 Digital Phase I (+ Simulcast) | + | * APCO P25 Digital Phase I (+ Simulcast) |
− | APCO P25 Digital Phase II (+ Simulcast) | + | * APCO P25 Digital Phase II (+ Simulcast) |
− | DMR Type I - Conventional Digital Mobile Radio (non licensed conventional, ie) MOVE???? | + | * DMR Type I - Conventional Digital Mobile Radio (non licensed conventional, ie) MOVE???? |
− | DMR Type II (Licensed conventional) MOVE???? | + | * DMR Type II (Licensed conventional) MOVE???? |
− | * Internet Protocol Site Connect (DMR) | + | ** Internet Protocol Site Connect (DMR) |
− | DMR Type III Hytera (Trunking) | + | * DMR Type III Hytera (Trunking) |
− | DMR Type III Other (ie. Capacity Max) Trunking | + | * DMR Type III Other (ie. Capacity Max) Trunking |
− | DMR Capacity Plus (Cap+) | + | * DMR Capacity Plus (Cap+) |
− | DMR Linked Capacity Plus - trunked multi-site multi-channel configuration of MotoTRBO which combines both Capacity Plus and IP Site Connect configurations. | + | * DMR Linked Capacity Plus - trunked multi-site multi-channel configuration of MotoTRBO which combines both Capacity Plus and IP Site Connect configurations. |
− | DMR Capacity Max | + | * DMR Capacity Max |
− | DMR Connect Plus (Con+) | + | * DMR Connect Plus (Con+) |
+ | |||
+ | [[File:Common Emission Designators.png|400px|thumb|right|Common Emission Designators]] | ||
+ | |||
+ | == Channel Spacing == | ||
+ | * Emissions below "fit" into the available channel spacing | ||
+ | * Radio/TV | ||
+ | * The smaller the channel spacing, the more users that we can fit in a block of frequencies | ||
+ | * The wider the channel spacing, the better the reception and audio fidelity | ||
+ | * 25 KHz - Wideband | ||
+ | * 12.5 KHz - Narrowband* (1/2 of wide) | ||
+ | * 6.25 KHz - Ultra-Narrow (1/2 of narrowband) | ||
+ | |||
+ | RF Channel | ||
+ | FDMA | ||
+ | TDMA (2 Time Slot) can carry 2 voice channels (Conversations) | ||
− | |||
− | |||
− | |||
− | |||
− | |||
== Emissions / Emission Designators == | == Emissions / Emission Designators == | ||
* See [https://www.apcointl.org/services/radio-frequency-management/emission-designators/ APCO for much more info] | * See [https://www.apcointl.org/services/radio-frequency-management/emission-designators/ APCO for much more info] | ||
* See [https://www.ailunce.com/blog/Common-types-of-radio-emissions Ailunce Common Types of Radio Emissions] | * See [https://www.ailunce.com/blog/Common-types-of-radio-emissions Ailunce Common Types of Radio Emissions] | ||
− | ''' | + | |
+ | |||
+ | '''Common Emission Designators''' See [[SCAN-AID Emissions]] for full list | ||
{| class="wikitable" | {| class="wikitable" | ||
− | ! 100KC3F || ReconRobotics surveillance robot video (430-450 MHz) | + | ! || Common Emission Designators |
− | + | |- 100KC3F || ReconRobotics surveillance robot video (430-450 MHz). | |
− | |||
− | |||
− | |||
− | |||
− | |||
|- | |- | ||
− | | | + | | 11K0F1E || Digital voice using frequency modulation without modulating sub-carrier. (11K0F1D Narrowband digital data, using frequency modulation without modulating sub-carrier) |
|- | |- | ||
− | | 11K0F2E || Digital voice using frequency modulation with modulating sub-carrier. | + | | 11K0F2E || Digital voice using frequency modulation with modulating sub-carrier. (11K0F2D digital data) |
|- | |- | ||
| 11K0F3E || Narrowband analog voice, considered by the FCC to be identical to 11K2F3E. | | 11K0F3E || Narrowband analog voice, considered by the FCC to be identical to 11K2F3E. | ||
Line 576: | Line 1,285: | ||
|- | |- | ||
| 11K2F3E || Frequency modulated (FM) 2.5 kHz deviation analog voice, "narrowband 12.5 kHz" (FMN mode in RadioReference.com Database) – may also be 11K0 and 11K3 bandwidth in the United States, may also be 10K1 or 12K5 bandwidth in Australia or Canada. | | 11K2F3E || Frequency modulated (FM) 2.5 kHz deviation analog voice, "narrowband 12.5 kHz" (FMN mode in RadioReference.com Database) – may also be 11K0 and 11K3 bandwidth in the United States, may also be 10K1 or 12K5 bandwidth in Australia or Canada. | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
|- | |- | ||
| 13K1F9W || Harris OpenSky (SMR – 4 slot). | | 13K1F9W || Harris OpenSky (SMR – 4 slot). | ||
− | |||
− | |||
|- | |- | ||
| 13K6W7W || Motorola iDEN (900 MHz). | | 13K6W7W || Motorola iDEN (900 MHz). | ||
Line 592: | Line 1,293: | ||
|- | |- | ||
| 14K0F3E || EDACS Analog Voice (NPSPAC). | | 14K0F3E || EDACS Analog Voice (NPSPAC). | ||
− | |||
− | |||
|- | |- | ||
| 15K4F9W || Harris OpenSky (SMR – 4 slot Data/Voice). | | 15K4F9W || Harris OpenSky (SMR – 4 slot Data/Voice). | ||
− | |||
− | |||
− | |||
− | |||
|- | |- | ||
| 16K0F2D * || 4 kHz deviation FM audio frequency shift keying (72 MHz fire alarm boxes). | | 16K0F2D * || 4 kHz deviation FM audio frequency shift keying (72 MHz fire alarm boxes). | ||
|- | |- | ||
− | | 16K0F3D || | + | | 16K0F3D || Frequency modulated analog data |
|- | |- | ||
| 16K0F3E * || Frequency modulated (FM) analog voice, 4 kHz deviation (NPSPAC); (FM mode in RadioReference.com Database). | | 16K0F3E * || Frequency modulated (FM) analog voice, 4 kHz deviation (NPSPAC); (FM mode in RadioReference.com Database). | ||
− | |||
− | |||
− | |||
− | |||
|- | |- | ||
| 20K0F3D * || Frequency modulated (FM) 5 kHz deviation DTMF or other audible, non-frequency shift signaling, such as Whelen outdoor warning sirens or “Knox-Box®” activation. | | 20K0F3D * || Frequency modulated (FM) 5 kHz deviation DTMF or other audible, non-frequency shift signaling, such as Whelen outdoor warning sirens or “Knox-Box®” activation. | ||
Line 617: | Line 1,308: | ||
| 20K0F9W || A "catch-all" designator originally intended for a number of simultaneous emissions, but has been misused as a single designator to indicate multiple types of operation. | | 20K0F9W || A "catch-all" designator originally intended for a number of simultaneous emissions, but has been misused as a single designator to indicate multiple types of operation. | ||
|- | |- | ||
− | | | + | | 4K00F1E || 6.25 kHz voice NXDN (Narrow IDAS, NEXEDGE). (4K00F1D 6.25 kHz data) |
|- | |- | ||
− | + | | 4K00F1W || 6.25 kHz voice and data NXDN (Narrow IDAS, NEXEDGE) frequency modulated without modulating sub-carrier. (4K00F2W with subcarrier) | |
− | |||
− | | 4K00F1W || 6.25 kHz voice and data NXDN (Narrow IDAS, NEXEDGE) frequency modulated without modulating sub-carrier. | ||
|- | |- | ||
| 4K00F2D || 6.25 kHz analog CW ID NXDN (Narrow IDAS, NEXEDGE). | | 4K00F2D || 6.25 kHz analog CW ID NXDN (Narrow IDAS, NEXEDGE). | ||
|- | |- | ||
− | + | | 6K00F1D || SCADA Carrier Frequency Shift Keying. (6K00F2D SCADA Audio Frequency Shift Keying.) (6K00F3D SCADA Analog data that is not AFSK (variable tone, DTMF, etc.).) | |
− | |||
− | | 6K00F1D || SCADA Carrier Frequency Shift Keying. | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
|- | |- | ||
− | | | + | | 7K30F1E || Futurecom “MOBEXCOM” DVRS (mobile repeater) voice (P25 waveform, slightly narrower occupied bandwidth). (7K30F1D data) |
|- | |- | ||
− | | 7K60F1E || 2-slot DMR (Motorola MOTOTRBO) TDMA voice. | + | | 7K60F1E || 2-slot DMR (Motorola MOTOTRBO) TDMA voice. (7K60F1D Data) (7K60F1W Data and voice) 7K60FXE (7K60FXD Data) (7K60FXW Data and voice) |
|- | |- | ||
− | | | + | | || 2-slot DMR (Motorola MOTOTRBO) TDMA voice. |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
|- | |- | ||
| 8K00F1D || P25 Phase I C4FM data. | | 8K00F1D || P25 Phase I C4FM data. | ||
|- | |- | ||
| 8K00F2D || Frequency Modulated digital data with modulating sub-carrier. | | 8K00F2D || Frequency Modulated digital data with modulating sub-carrier. | ||
− | |||
− | |||
|- | |- | ||
| 8K10F1D || P25 Phase I C4FM data. | | 8K10F1D || P25 Phase I C4FM data. | ||
Line 661: | Line 1,332: | ||
| 8K10F1W || P25 Phase II subscriber units (Harmonized Continuous Phase Modulation – H-CPM). | | 8K10F1W || P25 Phase II subscriber units (Harmonized Continuous Phase Modulation – H-CPM). | ||
|- | |- | ||
− | | | + | | 8K30F1E || 12.5 kHz voice NXDN (Wide IDAS, NEXEDGE). (8K30F1D 12.5 kHz data) |
− | |||
− | |||
|- | |- | ||
| 8K30F1W || P25 Phase I C4FM hybridized voice and data applications (most commonly seen on trunked licenses). | | 8K30F1W || P25 Phase I C4FM hybridized voice and data applications (most commonly seen on trunked licenses). | ||
Line 669: | Line 1,338: | ||
| 8K30F7W || NXDN 12.5 kHz digital voice and data (Wide IDAS, NEXEDGE). | | 8K30F7W || NXDN 12.5 kHz digital voice and data (Wide IDAS, NEXEDGE). | ||
|- | |- | ||
− | | | + | | 8K40F1E || P25 Phase I (4 Level C4FM Voice). ( 8K40F1D 4 Level C4FM Data) |
|- | |- | ||
− | | | + | | 8K50F9W || Harris OpenSky (2 slot narrowband). (8K40F9W NPSPAC – 4 slot Data/Voice) |
− | |||
− | |||
− | |||
− | |||
|- | |- | ||
| 8K70D1W || P25 Linear Simulcast Modulation ASTRO (9.6 kbps in 12.5 kHz channel spacing). | | 8K70D1W || P25 Linear Simulcast Modulation ASTRO (9.6 kbps in 12.5 kHz channel spacing). | ||
Line 683: | Line 1,348: | ||
| 9K36F7W || Yaesu System Fusion C4FM (Voice Wide * Voice Narrow + Data * Data Wide). | | 9K36F7W || Yaesu System Fusion C4FM (Voice Wide * Voice Narrow + Data * Data Wide). | ||
|- | |- | ||
− | | | + | | 9K70F1E || P25 Linear Simulcast Modulation “WCQPSK” voice (per Harris MASTR-V literature). (9K70F1D data) |
− | |||
− | |||
|- | |- | ||
| 9K80D7W || P25 Phase II fixed-end 2-slot TDMA (Harmonized Differential Quadrature Phase Shift Keyed modulation – H-DQPSK), per Motorola literature. | | 9K80D7W || P25 Phase II fixed-end 2-slot TDMA (Harmonized Differential Quadrature Phase Shift Keyed modulation – H-DQPSK), per Motorola literature. | ||
Line 697: | Line 1,360: | ||
=== Encryption === | === Encryption === | ||
+ | * May be called "crypto" for short. CAN NOT and WILL NEVER will be available to listen to on a scanner/receiver. | ||
* Encrypted frequencies or talkgroups CAN NOT be monitored with-out permission of the agency. That agency may issue a Encryption Key for use in a two-way radio or Unication Pager to be able to monitor. | * Encrypted frequencies or talkgroups CAN NOT be monitored with-out permission of the agency. That agency may issue a Encryption Key for use in a two-way radio or Unication Pager to be able to monitor. | ||
* Types of Encryption: | * Types of Encryption: | ||
+ | * Motorola radios require a MACE module and software upgrades | ||
− | + | ==Mobile Extender/Vehicular Repeater/DVRS == | |
* Increase the range of your portable radio, using your nearby mobile radio to reach out to a repeater, etc. | * Increase the range of your portable radio, using your nearby mobile radio to reach out to a repeater, etc. | ||
+ | * [https://static1.1.sqspcdn.com/static/f/1281716/17209689/1332195048400/Vehicular+Repeaters+and+The+700+MHz+band.pdf Article on '''VR and the 700 MHz Band'''] | ||
+ | * [https://static1.1.sqspcdn.com/static/f/1281716/17209687/1332195043383/Search++Rescue+Teams+Gain+w+Vehicular+Repeaters.pdf Article on 'SAR Teams Gain with VR] | ||
+ | * [https://static1.1.sqspcdn.com/static/f/1281716/17209685/1332195037453/Public+Safety+Reports.pdf 800 MHz VR Licensing | ||
+ | * [https://static1.1.sqspcdn.com/static/f/1281716/17209692/1332195052250/Whos+Watching+Reprint+6-06.pdf Air Force using VR at most sensitive remote bases] ND, WY, MT, TX | ||
+ | |||
+ | ==== [http://www.pyramidcomm.com Pyramid Communications] ==== | ||
+ | * The "original" vehicular repeater system. Made in the United States. | ||
+ | * All VRs work on a simplex channel. Can work IN-BAND with filtering options. | ||
+ | * VHF In-Band requires both the BPF-1604 Band Pass Filter and VHF Notch Filter. SVR Simplex MUST be 2 MHz or 5 MHz, or greater from all mobile frequencies (both TX and RX). The Notch filter is made in the 2MHz and 5MHz, with obviously the 2 MHz costing more. NOTE: This doesn't just mean the main channel you use, but ANY channel that may may need to use on the VR. | ||
+ | * (integrate above) BRF-1601 Notch Filter for as close as 5 MHz separation between mobile TX/RX and SVR-200. Use the narrower BRF-1602 Notch Filter for frequencies as close as 2 MHz separation | ||
+ | |||
+ | * VHF In-Band repeating is the most popular method of deployment, per Pyramid. Be aware, the 173 MHz MO3 frequencies are already crowded, at least with licenses in many areas. Much of this being used as constant data transmissions for water or waste-water monitoring systems. | ||
+ | * Pyramid (spent 5 years) worked to secure new MO3 channels on 173.2375, 173.2625, 173.2875, 173.3125, 173.3375, 173.3625. These are SHARED with telemetry users (as stated above). Recommended to work with [https://www.enterprisewireless.org/ EWA] for licensing of these frequencies, as they helped. APCO or any Public Safety coordinator "Should" be able to help though. | ||
+ | * UHF In-band DOES NOT require the use of a Band Pass Filter (, only the Notch Filter. The Notch Filter must be 5 or 10 MHz away from ALL mobile frequencies (both TX and RX). | ||
+ | * Multi-Band Radios and In-Band - New TPLX-V-U-M 100W VHF, UHF, 7/800 MHz Triplexer, works with Kenwood and Viking..... Harris Unity or APX-8500 mobiles only have one antenna connection for all bands. | ||
+ | |||
+ | * Multi-Vehicle Priority: One unit on a scene will provide priority traffic, without interference from other VRs. MO3 2W Maximum Power | ||
+ | * [https://www.youtube.com/watch?v=kRWwsEKDzxU Pyramid Digital Vehicular Repeater Webinar] (YouTube) | ||
+ | * '''Bandpass Filter:''' The BPF-1604 is a high selectivity pre-selector filter that prevents the mobile’s transmitter from overloading the SVR-200VB receiver’s front end. The filter is tuned to the SVR-200’s simplex frequency and rejects everything except a narrow band of frequencies centered around the SVR-200 frequency. | ||
+ | * '''Notch Filter:''' Transmitters are designed to broadcast on a specific frequency, but no matter how good the design of that transmitter, it produces RF energy across a broad band of frequencies. The FCC sets limits on how much “off-frequency” energy a transmitter can produce, but even within the limits, it may be enough to cause interference in a receiver located close by, such as the SVR-200. No amount of bandpass filtering on the SVR-200 will reduce this interference since it is right on the SVR-200 receive frequency. The BRF-1601 or BRF-1602 notch filter is tuned to the SVR-200’s receive frequency but installed on the mobile’s antenna cable. The notch filter further attenuates the noise produced by the mobile that occurs on the SVR-200 receive frequency. This is also why frequency spacing is so critical. None of the mobile’s frequencies, transmit or receive, can be within 5 MHz using the BRF-1601 or 2 MHz using the BRF-1602. If a mobile transmit frequency is too close, the filter will consume too much of the transmitter power, damaging the filter and possibly the transmitter. If a receive frequency is too close, the mobile’s receiver sensitivity will be degraded. | ||
+ | |||
+ | |||
+ | '''SVR-200''' | ||
+ | * [https://static1.1.sqspcdn.com/static/f/1281716/17209690/1332195049790/VHF+In-band+Primer.pdf Information] | ||
+ | '''SVR-250''' | ||
+ | * | ||
+ | '''SVR-252''' | ||
+ | * | ||
+ | '''SVR-P250''' | ||
+ | * for P25 | ||
+ | |||
+ | '''SVR-P255''' EVRS Enhanced Vehicular Repeater Solutions (Aug 2017) for Kenwood Viking P25 Trunking Systems, (like VM-900) | ||
+ | * P25 Smart Trunking Protocol, acts just like you were talking directly to the P25 trunking system. Simulates Trunking, still an MO3 License. | ||
+ | |||
+ | '''SVR-300 DMR''' | ||
+ | * Full Tier 2 DMR modulation to the portable radio, on a simplex talk-around channel using 1 Time-Slot. Encryption available. | ||
+ | * Mobile Radio can interface to Tier 2 or 3, Capacity Plus, Connect Plus, Max, Tier 3, IP Site Connect, etc. | ||
+ | * Interface cables for most popular DMR mobile radios | ||
+ | * Previous analog VRs DO WORK on DMR, but this is an upgrade from that. | ||
+ | * VHF, UHF, 700/800 MHz | ||
+ | * Uses Group IDs (GIDs) | ||
+ | |||
+ | '''SVR-300 NXDN''' | ||
+ | * NEXEDGE/iDAS. USB-D programming 6.25 or 12.5 MHz | ||
+ | * Uses RAN codes for priority signaling | ||
+ | |||
+ | === Vehicular Repeaters / Mobile Extenders === | ||
+ | * VRX1000 Vehicle Radio Extender provides federal agencies, state patrol and public safety first responders the ability to communicate on their portable radios in a mobile-only coverage area. Equipped with cross-band and in-band performance, and available in 700/800 MHz VHF and UHF frequencies, the VRX 1000 is compatible with P25 APX 7500, APX6500 and APX 4500 mobile radios. | ||
+ | |||
+ | * [https://www.datatronicscom.com/public-safety/vrx1000.htm VRX1000 Vehicle Radio Extender] [https://www.datatronicscom.com/downloads/motorola/vrx1000-vehicle-radio-extender-data-sheet.pdf Datasheet (PDF)] | ||
+ | |||
+ | * See Pyramid Communications | ||
+ | |||
+ | ==== DVRS (Digital Vehicular Repeater System) ==== | ||
+ | * In-Building etc. | ||
+ | * See [https://www.futurecom.com/ Futurecom] [https://www.youtube.com/watch?v=Cy_tIDr2Gho DVRS Explainer Video] (on YouTube, by Futurecom Systems) | ||
+ | * Owned by Motorola Solutions as of Oct 2022 [https://www.motorolasolutions.com/newsroom/press-releases/motorola-solutions-acquires-futurecom-systems-group.html LINK] For over 30 years, Motorola Solutions and Futurecom have collaborated on RF repeaters and extenders that are tightly integrated with Motorola Solutions’ radio networks and devices. These solutions help to ensure that first responders, even in remote locations, maintain critical communications and advanced features, such as encryption and data services, to do their jobs more safely and securely. FUTURECOM HAS A GREAT SELECTION OF VIDEOS ON YT: (LIST HERE) that explain how they work. Neat! [https://www.futurecom.com/agencies/fire/ for Fire Departments] | ||
+ | * [https://www.futurecom.com/wp-content/uploads/2023/09/dvrs-tunnel-application.pdf DVRS in Subway Tunnels, etc.]] | ||
+ | * Example - Illinois State Police are using VHF P25 DVRS to extend their 700/800 MHz STARCOM21 mobile radios, etc. This CONVENTIONAL P25 system still passes through the P25 NAC, Site ID, RFSS, RID/UIDs, Talkgroup numbers. On a Uniden scanner it looks just like you are on the P25 Trunked System voice channel. | ||
+ | * PSU - Portable Subscriber Unit | ||
+ | * Can repeater to Conventional or Trunked. Multiple units on-scene can use the same DVRS. | ||
+ | * [https://www.datatronicscom.com/public-safety/dvrs.htm DVRS] available through DataTronics, Alton IL | ||
+ | |||
+ | ===Motorola PDR8000 Portable Digital Repeater=== | ||
+ | [https://www.datatronicscom.com/public-safety/motorola-pdr8000-portable-digital-repeater.htm PDR8000] [https://www.datatronicscom.com/downloads/motorola/motorola-pdr80000-datasheet.pdf Datasheet (PDF) | ||
+ | |||
+ | ==== VRX1000 ==== | ||
+ | * Works with Motorola APX series mobile radios. 3 watt Simplex. [https://www.futurecom.com/coverage-solutions/vrx1000-vehicle-radio-extender/ LINK] [https://www.futurecom.com/wp-content/uploads/2023/10/vrx-1000-vehicle-radio-extender-datasheet.pdf Datasheet (PDF)] | ||
+ | |||
+ | === Temporary Repeaters === | ||
+ | * SOW Site on Wheels, COW | ||
+ | * Field/Incident Repeater (see youtube Jim G Field Incident Repeater/Portable Booster | ||
+ | |||
+ | = Paging / Data = | ||
== Two-Tone Paging == | == Two-Tone Paging == | ||
− | * Paging/Decoding/Alerting (See Unication and other scanners with available "Fire Tone-out" | + | * Paging/Decoding/Alerting (See Unication and other scanners with available "Fire Tone-out") |
+ | * Unication | ||
+ | * True Two-tone paging is only on analog, On P25 trunked, the sounds are simulated as an alert, but the paging info is sent digitally in the transmission. | ||
+ | |||
+ | === Store and Forward === | ||
+ | * May be called "Store Forward" | ||
+ | * [https://www.ameradio.com/product/512085/description.html Midian Electronics PR-19i] | ||
+ | |||
+ | '''Simplex Repeater Mode:''' | ||
+ | The PR-10i can be connected to a simplex mobile or base station to create a simplex store and forward repeater. When the PR-10i sees a busy indication from the connected radio it will start recording the received audio. When the busy indication goes away for a programmed amount of time, the PR-10i will key the radio and retransmit the recorded audio. The following are applications for the PR-10i as a simplex repeater: | ||
+ | |||
+ | - Expand radio coverage into remote locations, tunnels, buildings (hospitals, campuses, etc), downtown areas and more. | ||
+ | - Evaluate potential radio site or coverage problems by connecting the PR-10i to a mobile radio. A technician can then drive through the desired coverage area, key up and transmit voice, unkey and listen to the repeated audio quality. | ||
+ | |||
+ | '''Selective Repeat Mode:''' | ||
+ | The PR-10i has an integrated decoder that can be programmed to decode 2-Tone, with an option for DTMF, 5-Tone or Pulse Tone (1500 Hz or 2805 Hz for HEAR Systems). When the tone decoder decodes the programmed sequence(s) it will give a validate output to the PR-10. The validate confirms that the PR-10i should repeat the incoming audio. The tones will also be regenerated. The following are applications for the PR-10i as a selective simplex repeater: | ||
+ | |||
+ | - Regenerate 2-tone or DTMF (optional) pages for fire departments into remote areas or buildings with poor coverage. | ||
+ | - Regenerate Pulse Tone (optional) pages from ambulances in remote areas with poor coverage to hospitals (HEAR Systems). | ||
+ | |||
+ | '''Announcement Mode:''' | ||
+ | The PR-10i can be programmed to repeat the last received audio message continuously at programmable intervals, applications include: | ||
+ | |||
+ | - Broadcasts for road or weather conditions | ||
+ | - Aviation authority broadcasts for pilot information (ATIS � Automatic Terminal Information Service) | ||
+ | |||
+ | == POCSAG == | ||
+ | * Post Office Code Standardization Advisory Group, also known as Radio-paging code No. 1 [https://en.wikipedia.org/wiki/Radio-paging_code_No._1 Wikipedia (with Frequency List)] [https://www.sigidwiki.com/wiki/POCSAG Sigid Wiki info] | ||
+ | * Numeric and Text Pagers often used by Hospitals/Medical facilities and more (Much less use with the popularity of cellular phones/networks) | ||
+ | * VHF (152/157-158 MHz), UHF (454/459 MHz) and probably rare use: VHF low band (35/43 MHz) 72-76 MHz | ||
+ | * 27 MHz CB band, with high power on 27.255 (CB Ch. 23), 4W limit on other frequencies. | ||
+ | * NEEDS NOTATION: 30.56-49.58 MHz, 150.775-162.000 MHz VHF bands and the 450-470 MHz band (plus 421-430 or 470-512 MHz in certain cities) | ||
+ | * [https://www.hfunderground.com/wiki/index.php/POCSAG HFunderground Frequency list] | ||
+ | |||
+ | == Super-POCSAG == | ||
+ | * 1200 or 2400 BPS, has replaced most former POCSAG systems | ||
+ | |||
+ | * '''Decoding OpenPoc''' https://sourceforge.net/projects/openpoc/ | ||
+ | |||
+ | * [https://wipathcommunications.com/sppsf-store-forward-transmitter/#1560139236825-undefined SPPSF Transmitter for POCSAG] | ||
+ | |||
+ | == Companies == | ||
+ | * Unication | ||
+ | * Motorola | ||
+ | * | ||
+ | * [Https://www.spok.com/ Spok] (used at 2200+ hospitals) (Largest paging network in the US) | ||
+ | * [https://criticogroup.com/products/paging/ Critico Solutions (UK/Ireland)] | ||
+ | |||
+ | == Analog Data Transmissions (Non-DMR/NXDN/P25) == | ||
+ | (used in monitoring water pressure/pumps, | ||
+ | * SCADA - | ||
+ | * Telemetry - | ||
+ | * Paging | ||
+ | * POGSAC | ||
+ | * CW-ID (Morse Code) | ||
+ | * DTMF - Dual Done Multi-Frequency [https://www.techtarget.com/searchnetworking/definition/DTMF DTMF Definition] (by Techtarget) | ||
+ | ** Can be used to activate a phone patch or other repeater options, can be used to active outdoor warning sirens (weather), can be used by some older style radios as a "tail" at the end of the transmission, denoting the radio's ID number. | ||
+ | * DTMF Data Tail (at end of a voice transmission) | ||
+ | * End-of-Train (EOT) | ||
+ | * Robots | ||
+ | * 1 Tone Paging | ||
+ | * 2 Tone Paging | ||
+ | * 1 Tone Paging | ||
+ | |||
+ | |||
+ | * DMR also offers advanced data communications such as SCADA, Telemetry | ||
+ | * NXDN | ||
+ | |||
+ | = REPEATERS = | ||
+ | * Conventional. For Trunking, see | ||
+ | <div style="float:right;"> | ||
+ | {| {{table}} border="0" cellpadding="0" class="sortable" | ||
+ | ||{{Color|red|https://www.motorolasolutions.com/content/dam/msi/images/solutions/what-is-dmr/direct-mode_radio_coverage_eng_150dpi_800x254.jpg}} | ||
+ | |} | ||
+ | </div> | ||
+ | * A repeater added to the system allows radios to send their communications via a central point which repeats the message to the rest of the system. By installing a repeater high up (often on top of a building) the calls to the repeater are less affected by the obstructions. It also allows radios located far away from the repeater in opposite directions to communicate with each other, effectively increasing the range of the system. | ||
+ | <div style="float:right;"> | ||
+ | {| {{table}} border="0" cellpadding="0" class="sortable" | ||
+ | ||{{Color|red|https://www.motorolasolutions.com/content/dam/msi/images/solutions/what-is-dmr/with_repeater_radio_coverage_eng_150dpi-800x304.jpg}} | ||
+ | |} | ||
+ | </div> | ||
+ | * Repeater stations can be connected together by either retransmitting received signals (parroting) or by sending received signals to other repeaters on the system via other methods (internet, unidirectional transmitter, etc). With these methods, the range of the system is only limited by the amount of infrastructure you install. | ||
+ | |||
+ | =VOTERS / REMOTE LINKS= | ||
+ | |||
+ | * [https://accessmarketingteam.com/remote-site-monitoring Remote Site Monitoring with SitePortal] | ||
+ | * [https://accessmarketingteam.com/voters-%2F-ip-voting Voters / IP Voting by JPS] | ||
+ | |||
+ | == BDA/DAS In building Antennas == | ||
+ | * In-building signal booster solutions typically include three key components: (from [https://bearcom.com/press-release/bda-das-installations-requirements#:~:text=A%20Distributed%20Antenna%20System%20(DAS,garages%2C%20and%20other%20challenging%20zones.Bearcom]) | ||
+ | ** A donor antenna that is mounted on the roof to seize the wireless signal from the outside. | ||
+ | ** A Distributed Antenna System (DAS), which is a group of antennas placed throughout the structure to boost signal coverage. | ||
+ | ** Bi-Directional Amplifiers (BDAs) that extend two-way radio coverage into difficult-to-reach areas, such as stairwells, underground hallways, tunnels, parking garages, and other challenging zones. (Depending on size, materials, and structural design, some buildings may not require a BDA, or a standard two-way radio Repeater may be sufficient.) | ||
+ | * Many buildings benefit from having BDAs, including hospitals, office buildings, schools, manufacturing plants, sports arenas, and more. | ||
+ | |||
+ | * Depending on the equipment chosen and how it is installed and programmed, BDAs can be deployed to improve team communications for facility staff who use two-way radio systems (usually VHF or UHF bands) and/or to meet Public Safety radio coverage requirements, as required by law (usually on the 450/700/800 MHz bands). | ||
+ | |||
+ | * Public Safety radios help keep first responders in contact with each other during an emergency. It increases their safety, but it helps public safety professionals serve building occupants and visitors better, as well. | ||
+ | |||
+ | * Cellular BDA is also available to help improve cell coverage in buildings. These are specifically for cellular devices and will not increase two-way radio coverage. Therefore, it’s recommended to install two separate systems for your building: one for two-way radios and one for cell phones. | ||
+ | |||
+ | ==Public Safety Distributed Antenna Systems (DAS) == | ||
+ | * Also called an Emergency Responder Radio Communication System (ERRCS) | ||
+ | * Ensure that first responders have reliable radio communication in buildings and structures that might otherwise have areas with poor wireless coverage or heavy interference. | ||
+ | * Public Safety DAS is a relatively new development in the life-safety space. However, International Fire Code Section 510 (IFC 510) requires approved radio coverage for emergency responders in all buildings, making DAS an essential, code-driven system | ||
+ | * Improve radio communications - Boost the signal indoors for communication reliability of any two-way radio system in any frequency band - public safety or private enterprise. | ||
+ | * Comply with local mandates - Local jurisdictions may require adequate in-building coverage for public safety two-way radio systems before a building can be occupied. | ||
+ | * Lower total cost of ownership - A properly designed DAS can support multiple two-way radio systems, both public safety and private. | ||
+ | |||
+ | * Businesses like [https://www.techelectronics.com/locations/tech-electronics-st-louis/ Tech Electronics St Louis] | ||
+ | |||
+ | == Radiating Coax (Radiating Coaxial Cable) == | ||
+ | * May also be called "leaky coax" | ||
+ | |||
+ | * An application may require that the receiver be installed in one area, while the transmitter is used in another. In such an application, remote mounting the antennas insures that the performance area will receive proper RF coverage. Choosing the correct antennas, cabling, and mounting systems is essential for proper installation and Shure offers technical bulletins on this subject. But when the area being covered is an unusual shape, or if there are several areas, or if multiple floors of a building need to be covered with the same wireless system, radiating coaxial cable, or "leaky coax", can often provide a better alternative to stand-alone antennas. | ||
+ | |||
+ | * Similar to the standard coax cable used when mounting antennas remotely. What differentiates radiating coax are slots cut in the cable shield that allow RF to exit or enter the cable at any point along its length. An analogy is that of a light bulb and a fluorescent tube. While the bulb is a point source of light, like a whip or telescoping antenna, the fluorescent tube distributes light evenly along its entire length. | ||
+ | |||
+ | *Often used for distributed communication systems in tall buildings, tunnels, mines, and subway systems. The cable can be designed to handle any number of frequency ranges and can be installed in numerous ways. There are specialized mounting accessories and some cable designs are thin strips which can be mounted along ceiling tiles. Plenum-rated cables are also available. | ||
+ | |||
+ | For wireless microphone systems, radiating coax may be used in situations where a standard antenna will not provide adequate coverage. This cable can be fairly thick, 0.5 to 2 inches in diameter, so it is best suited to permanent installations, e.g. a museum with several floors. A single length of cable can be installed near the ceiling of each area that needs to be covered. Avoid placing radiating coax directly next to metal surfaces; it should be at least 2 inches away. Because the cable can potentially pick up more outside interference than standard coaxial cable, the transmitter should be within 40 feet of the cable for best performance. A 50 ohm termination load must be used to prevent standing waves or an unacceptable amount of signal loss. If there is a need to cover an outdoor area as well, the radiating coax can be terminated with a 1/2 wave antenna. | ||
+ | |||
+ | Radiating coax is also useful for personal monitor systems (PSM). In this application, the PSM transmitter drives the radiating coax and the PSM receivers pick up the RF signal being radiated. | ||
+ | |||
+ | Like standard coaxial cable, cable length and operating frequency directly effect the signal loss of radiating coax. In order to minimize losses or the impact on overall system performance, a large diameter cable must be used for longer length runs or higher frequencies. | ||
+ | |||
+ | = SIMULCAST, etc.= | ||
+ | == Simulcast == | ||
+ | ''' Conventional Analog ''' | ||
+ | * For example, a countywide Fire paging (tone-out) system using only 1 frequency. Multiple towers scattered throughout the county linked and synced to broadcasting the exact same traffic, all at perfectly the same time. | ||
+ | If it's off sync, it can cause pagers to not properly pick up the paging tones. Radio/Scanner users may hear the slight delay (or if it's actually out of sync, a bad delay) | ||
+ | * A bad simulcast delay would sound like this <<Insert YouTube/xxx link>>> | ||
+ | |||
+ | '''Conventional P25''' | ||
+ | * Same as analog, but with P25 can be synced by better means. | ||
+ | |||
+ | * How Simulcast works | ||
+ | |||
+ | '''Simulcast on 700/800 MHz system.''' | ||
+ | Multiple towers with the exact same frequencies, in the same general area, broadcasting the exact same traffic, all at perfectly the same time. | ||
+ | Radios and Scanners have to pick up the towers, that are all broadcasting, with different reception levels. | ||
+ | |||
+ | '''DMR (or NXDN ???) Conventional Simulcast''' | ||
+ | * Example, a college with 25 buildings across multiple acres. Could have just a few talkgroups needed/in use. Let's say 1 for Security/Admin, 1 for Maintenance, 1 for Janitorial/Housekeeping. Have 1 repeater at 5 different locations using 5 different frequencies, all capable of 2 SLOTS. All 5 frequencies will broadcast the exact same talkgroups on SL 1 and SL 2 | ||
+ | |||
+ | |||
+ | ==What is Multicast? == | ||
+ | Using a P25 800 MHz system, but the talkgroup traffic is also broadcasted on the old VHF system. It may be PATCHED, it may work both ways. Talk on the old analog frequency and you can talk on the units on the P25 system. | ||
+ | |||
+ | == Inter RF Subsystem Interface (ISSI)== | ||
+ | * For example, in Georgia, Fulton County and Cobb County have created an Inter RF Subsystem Interface (ISSI) link that allows users of certain Cobb County talk groups to automatically roam onto the Fulton County P25 system in certain areas where the Cobb County system has weak coverage but the Fulton County system has strong coverage. A temporary talk group on the Fulton County system is automatically assigned and linked back to the user's home talk group on the Cobb County system. Currently, Cobb County PD Precinct 2 units have access to such a temporary, automatically created ISSI patch on the Fulton County system. The talk groups below are part of a pool of talk groups that are automatically randomly assigned by the Fulton County system for these temporary ISSI links on an as-needed basis, with no user, dispatcher or system administrator intervention required. See [https://www.radioreference.com/db/sid/8340#tgCid-29765 Fulton County Public Safety P25] | ||
+ | |||
+ | |||
= ANTENNAS = | = ANTENNAS = | ||
* Note: Some antennas are made to RECEIVE ONLY. So may be able to transmit a certain amount of wattage. | * Note: Some antennas are made to RECEIVE ONLY. So may be able to transmit a certain amount of wattage. | ||
+ | * [ The Future of Antenna Technology (innovations unleashed)] (by Antenna Expert, on YouTube) | ||
+ | |||
== How Antennas Work == | == How Antennas Work == | ||
[[File:Line-of-site-formulas.png|400px|thumb|center|Line-of-Sight Formulas]] | [[File:Line-of-site-formulas.png|400px|thumb|center|Line-of-Sight Formulas]] | ||
Line 718: | Line 1,611: | ||
* NMO | * NMO | ||
* Clip-On / Gutter Mount | * Clip-On / Gutter Mount | ||
+ | * Canister Type - a low profile narrow band antenna such as the Antennex Phantom series TRA1500B. Not only is it a smaller target and narrow band, but because it is a canister type antenna (about the size of a soup can) you have more mounting options such as behind the grill of the vehicle. | ||
* Through-Window | * Through-Window | ||
Line 729: | Line 1,623: | ||
* Live in a High-Rise without accessible windows. | * Live in a High-Rise without accessible windows. | ||
* Live in a High-Rise with accessible windows. | * Live in a High-Rise with accessible windows. | ||
+ | * On the road, at a hotel, motel. etc. | ||
+ | * Campers, Camping, RVs | ||
+ | * Boats | ||
= FEED LINE / CONNECTORS = | = FEED LINE / CONNECTORS = | ||
Line 742: | Line 1,639: | ||
* IF Frequency on your receiver xxxx | * IF Frequency on your receiver xxxx | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
== ???? == | == ???? == | ||
* [https://www.cisa.gov/sites/default/files/2023-02/NIFOG%202.01%20508%20FINAL.pdf National Interoperability Field Operations Guide (NIFOG) March 22] | * [https://www.cisa.gov/sites/default/files/2023-02/NIFOG%202.01%20508%20FINAL.pdf National Interoperability Field Operations Guide (NIFOG) March 22] | ||
− | |||
= REFERENCE= | = REFERENCE= | ||
− | |||
* [https://www.npstc.org/acronyms.jsp Public Safety/Related Acronyms] | * [https://www.npstc.org/acronyms.jsp Public Safety/Related Acronyms] | ||
+ | |||
+ | ===Acronyms / Abbreviations=== | ||
+ | * AES - Advanced Encryption Standard which is a 256 bit algorithm. (P25) General use and is the required format for interoperable encryption. | ||
+ | * ALGID - Algorithm ID (for P25 Encryption) | ||
+ | * AM | ||
+ | * CAI - Common Air Interface ############# | ||
+ | * CSQ - Carrier Squelch ####### (See terms) | ||
+ | * CTCSS | ||
+ | * CDCSS - See DCS | ||
+ | * DCS - Digital Coded Squelch (used on analog conventional) | ||
+ | * DPL - See DCS | ||
+ | * DES - Data Encryption Standard -- algorithm, which uses 64 bit Output Feed Back and is denoted as DES-OFB (P25). An encryption standard using a 56 bit key that was | ||
+ | previously approved by the Federal government. This standard is no longer certified by the | ||
+ | Federal government but is still in widespread use. | ||
+ | * DTMF - Dual-Tone Multi-Frequency” - a signaling scheme used by the telephone system in which two voice band tones are generated for each keypad key press###### | ||
+ | ** Used by some two-way radio systems and Outdoor Warning Sirens | ||
+ | * DVP - Digital Voice Protection - An encryption algorithms used to provide secure voice radio transmissions | ||
+ | * DVRS - seeeeeee############ | ||
+ | * FCC | ||
* FDMA - Frequency Division Multiple Access (Phase I) [https://www.sciencedirect.com/topics/engineering/frequency-division-multiple-access More info] | * FDMA - Frequency Division Multiple Access (Phase I) [https://www.sciencedirect.com/topics/engineering/frequency-division-multiple-access More info] | ||
** [https://forums.radioreference.com/threads/how-to-listen-to-fdma-phase-1-trs-without-using-nas-or-worrying-about-affiliation.467067/ Listen with affiliating with system] | ** [https://forums.radioreference.com/threads/how-to-listen-to-fdma-phase-1-trs-without-using-nas-or-worrying-about-affiliation.467067/ Listen with affiliating with system] | ||
+ | * FIPS - Federal Information Processing Standard (FIPS) | ||
+ | * FIPS Code - ###########NWS | ||
+ | * FM | ||
+ | * FMN (see NFM) | ||
+ | * ISSI - Inter Sub-System Interface | ||
+ | * KID - Key Identifier for Encryption (P25) | ||
+ | * KMF - Key Management Facility (P25) | ||
+ | * LMR - Land Mobile Radio | ||
+ | * LRRP (dsd+) | ||
+ | * LMR - Land Mobile Radio | ||
+ | * MDC - Mobile Data Computer (laptop in vehicle | ||
+ | * MDT - Mobile Data Terminal (laptop in vehicle | ||
+ | * NFM | ||
+ | * NIST - National Institute of Science and Technology - laboratory as compliant with the security requirements $$$$$$$ (P25 Encryption) | ||
+ | * NPSPAC - National Public Safety Planning Advisory Committee - User/industry advisory committee established by the FCC to develop a plan for the use of the 800 MHz Public Safety spectrum. | ||
+ | * NSW - National Weather Service (US Govt, NOAA) ### | ||
+ | * OTAR - Over The Air Rekeying | ||
+ | * OWSR - Outdoor Warning Sirens (these are general meant only to be heard when outside) (Tornado sirens etc) | ||
+ | * PTT - Push-to-Talk (switch on a radio that "key" up a radio transmitter by Mic* | ||
+ | * P25 - Project 25 - Defines system interfaces that are utilized to build P25 communications networks. TIA-102 Standards documents define the messages and procedures required for P25 features to operate across the P25 system interfaces. | ||
+ | * RF - Radio Frequency [also See RF-Link below) | ||
+ | * RID | ||
+ | * SCADA - | ||
* TDMA - Time Division Multiple Access (Used on DMR, P25 Phase II; see above) | * TDMA - Time Division Multiple Access (Used on DMR, P25 Phase II; see above) | ||
+ | * TGID - Talkgroup ID | ||
+ | * TRS - Trunked Radio System | ||
+ | * UHF - Ultra High Frequency (300 MHz - 3 GHz) | ||
+ | * UID - Unit ID (see also Working Unit ID / WUID) see RID * (P25) | ||
+ | * VHF - Very High Frequency (30 - 300 MHz) may also be called "High Band" | ||
+ | * WUID - Working Unit ID (see UID) (P25) | ||
+ | * WFM | ||
+ | |||
+ | '''Emissions''' | ||
+ | * CSBK | ||
+ | * | ||
===Terminology === | ===Terminology === | ||
+ | * Bandwidth - The difference between the limiting frequencies of a continuous frequency band. Typically measured in Kilohertz. May be considered the amount in kilohertz required for a single communications channel. | ||
+ | * Base Station | ||
+ | * Carrier Squelch - A radio receive mode of operation that causes the receiver to unmute in the presence of a received signal | ||
+ | * Channel Spacing - Typically measured in kilohertz from the center of one channel to the center of the next-adjacent-channel. May, or may not, be identical to bandwidth | ||
* Clear Channel - Usually referring to AM stations that (only had | * Clear Channel - Usually referring to AM stations that (only had | ||
+ | * Covert - Adjective used to describe undercover operations by government agents. “Covert” communications are generally encrypted | ||
+ | * Encrypt/Encryption/Encrypted - A coding of plain voice or text, into unintelligible forms, for secure transmission, that cannot usually be decoded by those without a "key" | ||
+ | * Firmware - Software that is stored in a device, such as a scanner/receiver/two-way radio, that is used to operate the device. Manufacturers can send out updates if/when they elect. | ||
+ | * Fixed Base / Control (Repeater input)xxxxxxxxxxxxxxx | ||
+ | * FLEET - While in many cases, these usually is a companies "vehicles", Fleet is used in the communications world as "radios" (mobiles, portables, etc) *may also be referred to as "Subscriber radios" | ||
+ | * Full-Duplex - Transmission is permitted, simultaneously, in both directions on a telecommunications channel.(requires 2 channels/frequencies) | ||
+ | * High Band - VHF (usually referred to the 150-174 MHz band, but technically includes others) | ||
+ | * Input | ||
+ | * Landline - Telephone (old-fashioned telephone service/call) | ||
+ | * Low Band - Usually referring to radio systems operated below 45 MHz | ||
+ | * Output - | ||
+ | * Packet - terminology // noun - ham radio term | ||
+ | * Public Service - By Telephone (used by Public Safety for meaning info from telephone, etc) | ||
+ | * Repeater - | ||
+ | * RF Link - | ||
+ | * Secure - Encrypted | ||
+ | * Signal (How is my signal) | ||
* Silent - Station is off the air | * Silent - Station is off the air | ||
+ | * Silent Key - Ham Radio operator (who has past away) "John WB9ABC is a silent key" | ||
+ | * Simplex - | ||
+ | * Squelch | ||
+ | * Strapped - Talkgroup is always encrypted and cannot be turned off (opposite: user selectable) | ||
+ | * SUBSCRIBER - Radios that "subscribe" (have access) to the radio systems (mobiles, portables, desktop control stations, repeaters, DVRS, etc) | ||
+ | * Twenty One - Reference to 10-21 10 Code for telephone call | ||
+ | * Vehicular Repeater /// mobile extenders // DVRS | ||
---- | ---- | ||
− | Related wiki pages | + | ;Related wiki pages |
− | https://wiki.radioreference.com/index.php?title=Scanning_101&action=edit | + | * https://wiki.radioreference.com/index.php?title=Scanning_101&action=edit |
* [http://www.natcom.com National Communications Magazine] | * [http://www.natcom.com National Communications Magazine] | ||
* [http://new.marksscanners.com/ Mark's Scanners Easier-to-Read Scanner Manuals] (Highly recommend) | * [http://new.marksscanners.com/ Mark's Scanners Easier-to-Read Scanner Manuals] (Highly recommend) | ||
− | == Scanner Websites/Groups/YouTube == | + | ---- |
+ | === Codes === | ||
+ | * 10-Codes | ||
+ | * Common Language Protocol - (The Agency is) Using no codes at all. All plain language | ||
+ | * TIPS - Illinois State Police codes (mostly not used any longer) | ||
+ | |||
+ | === Abbreviations/Codes/Terms for Radio Traffic=== | ||
+ | some terms above may need to be moved here </br> | ||
+ | * Flatbed - Flatbed truck for towing (either too big or too damaged to drag with a tow truck) | ||
+ | * Hook - Tow Truck | ||
+ | ** Next on the list - Driver didn't request specific tow truck, so use the in-house list of rotating tow trucks | ||
+ | * In-house - Usually referring to the Local/PD's database on information (Phone numbers, addresses, citizens) | ||
+ | * NCIC | ||
+ | * | ||
+ | |||
+ | == Scanner Websites/Social Media/eMail Groups/YouTube == | ||
=== Learning === | === Learning === | ||
* THIS wiki page! | * THIS wiki page! | ||
Line 778: | Line 1,762: | ||
* Mark's Scanners "Easier-to-Read" Manuals [http://new.marksscanners.com/ Website] | * Mark's Scanners "Easier-to-Read" Manuals [http://new.marksscanners.com/ Website] | ||
− | * | + | '''Two-Way Radio''' |
+ | * [https://www.taitradioacademy.com/ Tait Radio Academy - Learn everything you need to know about LMR (Land Mobile Radio) | ||
+ | |||
+ | === YouTube=== | ||
+ | * [https://www.youtube.com/@BoyAndAScanner Boy and a Scanner] All things scanners and radios! Get yer freq on! [https://boyandascanner.com/ Website] | ||
+ | |||
+ | ===Discord=== | ||
+ | * Scanner School | ||
+ | |||
+ | ===Discussion/Forums=== | ||
+ | * RadioReference Forums | ||
+ | * ioGroups (replacement eGroups/YahooGroups) | ||
=== Places to buy Scanners, Pagers, Antennas, Feed Wire and more === | === Places to buy Scanners, Pagers, Antennas, Feed Wire and more === | ||
− | * [ | + | * [https://www.scannermaster.com/?Click=6262 ScannerMaster] (Use this link to give referral money to ScannerSchool! |
* [https://www.ZipsScanners.com Zip's Scanners] | * [https://www.ZipsScanners.com Zip's Scanners] | ||
* HRO ? | * HRO ? | ||
+ | * MFJ (closing it's local manufacturing in May 2024, will still distribute products by other manufacturers) | ||
+ | |||
+ | == Two-Way Radio Sales and more == | ||
+ | * [https://bearcom.com/about-bearcom Bearcom] (North America's Largest Voice, Video And Data Rental Partner For Live Events, Industrial And Market Solutions) | ||
+ | * [https://www.futurecom.com/ Futurecom Systems Group] (a Motorola Solutions Company as of Oct 2022) [https://www.youtube.com/watch?v=q0x4t753aDI DVRS Testing Series] on YouTube | ||
+ | |||
+ | ===[https://www.datatronicscom.com/ Datatronics (Metro St Louis)]=== | ||
+ | * [https://www.datatronicscom.com/vehicle-upfitting/ Vehicle Upfitting Services] (Public Safety/Municipal in Greater St Louis , Northeast MO, and Southwest IL | ||
+ | * Two-way Radio and Wireless Communications Solutions (Motorola Solutions channel partner) | ||
+ | * [https://www.datatronicscom.com/marine-electronics/ Marine Electronics] (for ships on the Mississippi River and other lakes/waterways throughout the Midwest) | ||
+ | * [https://www.datatronicscom.com/public-safety/dvrs.htm DVRS] | ||
+ | |||
+ | ===[https://www.warnercomm.com/ Warner Communications] (Metro St Louis)=== | ||
+ | * Radio systems, Rentals and wide-area coverage systems [https://assets-global.website-files.com/60107849c3e2467e82e4373c/601342cc7ad2e164d479e68f_locations-map.png Location Map] | ||
+ | * P25, TETRA, NXDN, DMR Tier 2 and Tier 3, fleet vehicle installs, connecting multiple sites over IP, and building and deploying dispatching solutions are some of our specialties. | ||
+ | ** Bought IE Communications in Trenton IL in 2015 | ||
+ | * 2014 acquisition of [https://www.dittronics.com/ Dittronics] in Benton MO (Founded in 1974, serving the SE MO region for 40 years.) | ||
+ | * 2000 bought some assets of former St. Louis company A&E Electronics | ||
+ | * [https://www.voceon.com/ Voceon] founded in Houston TX in 2015, expanded into Chicago in 2016 and San Antonia in 2018 | ||
+ | |||
+ | === WirelessUSA (Metro St Louis)=== | ||
+ | * [http://www.wirelessusa.com Website] Based out of Maryland Heights MO, with satellite offices in Collinsville IL....... Jefferson City MO | ||
+ | * Trunked Radio Systems | ||
+ | |||
+ | (ILLINOIS) | ||
+ | |||
+ | === BeckTech - A Barbeck Company === | ||
+ | * [http://www.becktechil.com Website] Offices in Decatur, Dixon, Effingham, Urbana IL | ||
+ | * [https://www.becktechil.com/services/airtime-solutions.htm WAVE PTX™ from Motorola Solutions / Push-to-Talk Wide Area Coverage] [https://www.barbeckptt.com/ Nationwide PTT Website] | ||
+ | |||
+ | === DataTronics (Alton IL) === | ||
+ | |||
+ | == MISSOURI == | ||
+ | === Radio Comm. Co === | ||
+ | * [https://www.rccradio.com/ Website] | ||
+ | * A Motorola Solutions Channel Partner is based in Washington, MO. We are located about 50 miles west of St. Louis. We are uniquely geographically situated in Missouri to serve both rural communities and the St. Louis metro area. | ||
+ | Some of the counties and cities in our local service area include: Franklin County Jefferson County St. Charles County St. Louis County Sullivan County Warren County | ||
+ | |||
+ | === Central Communications Service Company (Sedalia) === | ||
+ | * [http://www.centralcommunications.com Website] Appears to currently be down | ||
+ | |||
+ | (ARKANSAS) | ||
+ | === Smith Two-Way Radio Inc (Fayetteville) === | ||
+ | * [http://www.smithradio.com Website] | ||
== Frequency Coordination == | == Frequency Coordination == | ||
+ | * See [https://en.wikipedia.org/wiki/Frequency_coordination WIKIPEDIA] for full explanation; [https://en.wikipedia.org/wiki/Frequency_coordinator WIKIPEDIA on Coordinators] [https://www.apcointl.org/services/radio-frequency-management/frequency-coordination/ APCO] | ||
+ | * Frequency Coordination is a technical and regulatory process that removes or mitigates radio-frequency interference between different radio systems that operate on the same frequency or adjacent frequencies. | ||
+ | * The Federal Communications Commission (FCC) has certified specific associations to perform the coordination process used to choose appropriate frequencies for land mobile radio systems before they, the FCC, will accept applications for licensees to operate two-way radio systems. This is essential to ensure the numerous systems across the country have clear and interference-free operation on their critical radio systems. | ||
+ | * It is REQUIRED for (nearly) all FCC Part 90 radio radio frequency applications and many "major" modifications. (Major has a certain definition per the FCC rules). | ||
+ | (mix | ||
+ | * [https://operations.nfl.com/gameday/behind-the-scenes/nfl-event-frequency-coordinators/ NFL Event Frequency Coordination (Football)] | ||
+ | * Anything that requires Frequency Coordination must be electronically submitted by the Coordinator. Frequency Coordination is required for a new filing. Major Modifications and Amendments that change or add frequencies, emissions, ERP, Output Power, Antenna Height, Ground Elevation, change location of Base, Fixed, Mobile or Control stations or number of Mobile units and any change to station class. (Hydro frequencies listed in CFR 47 Section 90.265(a). Go through the National Oceanic and Atmospheric Administration (NOAA) for coordination. | ||
+ | |||
+ | * Frequency Coordination is not required for STAs unless the applicant is requesting a waiver of the 180-day limit of STA. Developmental and Demonstration applications, Radiolocation (RS) applications, Itinerant operations and station classes ending in the letter "I" or "L" and applications for 6.1 Meter Control Stations. | ||
=== Frequency Coordinators === | === Frequency Coordinators === | ||
+ | * [https://www.fcc.gov/general/public-safety-frequency-coordinators Public Safety Coordinators (FCC)] | ||
+ | * [https://www.apcointl.org/services/radio-frequency-management/frequency-coordination/ APCO International] Public Safety | ||
+ | * [https://www.enterprisewireless.org/ Enterprise Wireless (EWA)] | ||
+ | * [https://www.radiosoft.com/home/ RadioSoft] | ||
+ | * [https://www.frequencycoordinator.com/ AAR] (American Association of Railroads) | ||
+ | ** The only Frequency Coordinator for the railroad frequencies, 160.215-161.565 MHz and 452 and 457 MHz bands. Can also help with General Business Pool 30-50 MHz,150-173 MHz, & 450-470 MHz bands; can assist with frequencies in cooperation with the Automobile (LA), Petroleum (IP), Power (IW) frequency coordinators. | ||
+ | === Frequency Consulting and Advisory === | ||
+ | * [https://atecwireless.com/home ATEC Wireless] (RF engineering services firm) | ||
+ | ===Licensing=== | ||
− | === | + | = FCC = |
− | * [https:// | + | == New Licenses / Modification Applications == |
+ | |||
+ | |||
+ | '''Notice of Return letter''' | ||
+ | * This letter is sent when the FCC finds discrepancies in the application submitted. It will need to be corrected in ULS as an application amendment. See [https://www.fcc.gov/wireless/support/universal-licensing-system-uls-resources/amending-application-universal-licensing LINK] | ||
+ | |||
+ | === Searching the database=== | ||
+ | |||
+ | |||
+ | === Renewing Licenses === | ||
+ | |||
+ | '''Construction/coverage reminder letter and build out deadline (FAILURE)''' | ||
+ | * The buildout deadline is the FCC’s request that all license holders notify them when the frequencies have been placed into service. You have 1 (one) year from grant date to do this. Approximately 90 days from the build out deadline, the FCC will send a courtesy letter notifying you of this deadline in the form of a Construction/Coverage letter. Not filing within a timely manner will result in frequency termination. [https://www.fcc.gov/constructioncoverage-requirements LINK] | ||
+ | |||
+ | == Need Two-Way Radios? Frequencies?? == | ||
+ | * Part 95 FRS, MURS, GMRS | ||
+ | |||
+ | * license itinerant frequencies for a wide area. | ||
+ | |||
+ | * Available frequencies: | ||
+ | * OVERUSED frequencies: 464.5, 469.5, 464.55, 469.55, 151.505, 158.4 and others. Often 67.0 PL tone | ||
== Related Wiki Pages (Coming soon) == | == Related Wiki Pages (Coming soon) == | ||
+ | * [[SCAN-AID-MetroStLouisRoads|Metro St Louis Road]] (info and construction) | ||
* Metro St Louis Radio Stations - AM | * Metro St Louis Radio Stations - AM | ||
* Metro St Louis Radio Stations - FM | * Metro St Louis Radio Stations - FM | ||
− | + | ==Metro St Louis Radio Personalities/Shows== | |
− | |||
− | ==Metro St Louis Radio Personalities== | ||
'''Farmer Dave Schumacher''' | '''Farmer Dave Schumacher''' | ||
− | * 5-6 AM on 550 KTRS St Louis; Market updates at 10 AM and Noon. | + | * 5-6 AM on 550 KTRS St Louis; Mon-Fri, Market updates at 10 AM and Noon. (Sat version 6-7 AM with ....) |
+ | * Last show after 28 years, was on Friday April 12, 2024 | ||
* [https://ktrs.com/farmer-dave/ Webpage] [https://www.facebook.com/profile.php?id=100050551727150 Facebook page] [https://www.facebook.com/groups/hallOFfarmer/ Facebook Fan Group] [https://soundcloud.com/550ktrs/farmer-dave-1-19-24 Past Shows on Soundcloud] | * [https://ktrs.com/farmer-dave/ Webpage] [https://www.facebook.com/profile.php?id=100050551727150 Facebook page] [https://www.facebook.com/groups/hallOFfarmer/ Facebook Fan Group] [https://soundcloud.com/550ktrs/farmer-dave-1-19-24 Past Shows on Soundcloud] | ||
Line 817: | Line 1,894: | ||
==Search and Rescue Mutual Aid (SARMA)== | ==Search and Rescue Mutual Aid (SARMA)== | ||
* Former Illinois Weather Alert Radio Network (I-WARN) | * Former Illinois Weather Alert Radio Network (I-WARN) | ||
− | * 155.205 assigned for use in Illinois statewide, Temporary Base, mobiles, Base Station located in Madison County {{Callsign|WQCI585}} | + | * 155.205 assigned for use in Illinois statewide, Temporary Base, mobiles, Base Station located in Madison County. May also be used in St Louis City and County {{Callsign|WQCI585}} |
* 152.285 Repeater with 157.585 input (licensed, but no longer on air). Bases licensed in Illinois, but mobiles on both frequencies authorized for use in Missouri, Illinois and Indiana {{Callsign|WQBB433}} | * 152.285 Repeater with 157.585 input (licensed, but no longer on air). Bases licensed in Illinois, but mobiles on both frequencies authorized for use in Missouri, Illinois and Indiana {{Callsign|WQBB433}} | ||
Latest revision as of 00:24, 26 May 2024
4/24 - THIS PAGE IS UNDER CONSTRUCTION.
THIS IS A "WORK-IN-PROGRESS" and will be broken up into additional pages.
Please do not edit anything on the page. If you have ideas, corrections or questions, please message me on the forums or email me at starcom21@RadioReference.com
xxx | P | C | L | P | U | Map | |
---|---|---|---|---|---|---|---|
R | I | I | S | I | I | D |
Contents
- 1 Introduction
- 2 Frequencies
- 3 Scanners / Receivers
- 4 Railroad Monitoring (Railfanning)
- 5 Other Scanner Features / Mobile Device Aps
- 6 Weather Alerts
- 7 Two-Way Radio
- 8 AMATEUR RADIO
- 9 911, InterOp and Related Agencies
- 10 INTEROP
- 11 Microphones for Two-Way Radios
- 12 Volume / Speakers / Line-Out
- 13 Live Scanner Feeds / Streaming
- 14 Squelch / Carrier Squelch / Codes
- 15 Frequency Hunting
- 16 DIGITAL MODES / other
- 17 Digital Modes
- 18 DMR/MotoTRBO
- 19 NXDN
- 20 P25 (APCO P25)
- 21 Other Digital Standards
- 22 SEARCHING FOR FCC LICENSES
- 23 FREQUENCIES
- 24 Paging / Data
- 25 REPEATERS
- 26 VOTERS / REMOTE LINKS
- 27 SIMULCAST, etc.
- 28 ANTENNAS
- 29 FEED LINE / CONNECTORS
- 30 REFERENCE
- 31 FCC
Introduction
Welcome to SCAN-AID. Using a combination of material that I have found and knowledge that I have gained, from over the years.
1) Watch this video Radio System Operation for Public Safety Communications Professionals about HOW radio systems work. This is one of the easiest explanations of Two-Way radio operations that I've ever seen. (It does not cover DMR, NXDN or P25 Phase II)
Note: I do NOT take personal credit for some information compiled in these wiki articles. It's mostly info gathered through scanner forums, groups, websites, youtube, etc AND personal experience. I have done my best to make sure what I have here is correct, but to welcome constructive criticism or corrections. starcom21@RadioReference.com. Also, I have tried give credit to others when possible. .
My Story
I grew up in a town of 5400, the County Seat, of about 45,000-50,000 people, but in the 11th largest Illinois County of 862.91 sq mi. We were in telephone 2 area codes and 3 telephone LATAs (Local Access and Transport Area which defines geographical boundaries of local telephone service networks), Due to these LATAs, Enhanced 911 service was not able to go live until 10 years after the E911 system was approved by the voters. Before this, there was not countywide Fire/EMS dispatch system and everyone was dispatched by different methods, radio frequencies, etc. In the county, there are 26 townships (each with their own road department, 26 communities (Cities, Towns, Villages, non-incorporated, 10 police departments, 11 fire districts, 7 ambulance services. My town had the largest school district by area, in the area, and 2nd largest school attendance; with another 8 districts in the county (now, there were more before consolidation)
In the 80s, my local town had 1 VHF frequency for Police, Fire, EMS, street/water/sewer, and 1 VHF car-to-car mobile channel for Police. The County Sheriff had 39 MHz radios, with duplex operations, base on one frequency and mobiles on another frequency. They used 39.5 for talking with some other towns and some other counties. They used 39.46 for contact with a couple towns and with the Illinois State Police dispatch. Illinois State Police where also on 42 MHz duplex for District 18. They used 155.475, the ISPERN channel, for alerts. So ISP had both Low and High band radios in their cars and/or carried a VHF portable. They later on used the VHF portables to talk on 155.505 back to the 42 MHz mobile radios for vehicular repeaters. Secretary of State Police, Conservation Police and DNR were on multiple VHF repeaters across the state, but still used UHF to talk to ISP Dispatch. They also used VHF vehicular repeaters. The local school district had one simplex Base/Mobile frequency. Eventually the County Highway department and some township road departments had their own VHF simplex radios. As a kid, I couldn't tell much of anything else in town that had any radios, except for the scanner crystals "list" you could see at the local RCA dealer, who also sold Bearcat scanners and crystals. Our local Radio Shack also had scanners and crystals available. We had a Bearcat IV 8 channel scanner sitting at home.
I started buying some inexpensive 4-6 channel portable scanners, found at yard sales, etc. I rode my bike miles a day, so often they fell and broke easily. I used rechargeable batteries that I bought from Walmart. I got my first programmable scanner, a handheld, probably the Pro-2006 around 1990 or so, and new I had to take a lot better care. By then, I wasn't riding my bike as much, so only damage from faulty handling.
My friends were members of a local Boy Scout Fire Explorer Post. We had CB radios is our vehicles and a base station set up in my home 2 story house, the fire department and a few other places, that we used to contact each other with. We applied for an FCC License/radio frequency and had a VHF frequency for use, but never got the radios. In the 80s and early 90s, CB radios were still very big with teenagers and 20-somethings that were "cruising the town" in the evenings, but especially on weekends. The local Police and some state police also had CB radios (and sometimes scanners). Even out late out night, helped out people and truckers who were looking for the hospital or were lost. There were multiple other huge CB enthusiasts in town (former Truckers, etc) that had base stations in their homes.
As I got a better job and moved out, with my own vehicle, I ended up with mobile programmable units too. I eventually moved out of town for work and came back home all the time. Back then there was little trunking in the early-to-mid 90s. It was so easy just to program analog frequencies in a scanner that had memory banks.
Living in Springfield IL in the 90s, Police moved from UHF, to a Motorola Type 1, upgraded to a Motorola Type 2, then eventually their own P25 system with back up on STARCOM21. Fire in the state capital Springfield as well as countywide was still on VHF and continues to this day. County was upgraded from 1 Base/Mobile frequencies to multiple repeaters in the county. City Fire was still analog for a long time until switching to the statewide P25 800 MHz system. County Fire departments are also moving to the statewide system, with the addition of Simulcast towers in the county.
Frequencies
- United States VHF Marine Frequency List
- SCAN-AID-Frequencies Under Construction
Scanners / Receivers
Uniden
- Uniden Forums RR Uniden Tech Discussion RR Uniden Tavern RR Release Thread RR [https://www.uniden.info/download/ Uniden Website for downloading updates and owner's manuals.
- Third Party Accessories and Battery Tips for the 436, 536 and SDS Scanners (Beltclips, Batteries, Bluetooth, Cases, Antennas, Etc.
New Uniden Bearcat BCD160DN & BCD260DN
- See Train Aficionado 160/260 Release Video
- See The Scanner Guys - YouTube announcement
- Scanner School with Phil - Uniden New Scanner and SDS Firmware Updates/Upgrades
My Issues with buying this "new" scanner:"
Yes, it does NXDN and DMR Conventional. TRUNKING and P25 NOT INCLUDED. NOT AVAILABLE.
WHAT they are NOT telling you (from what I have gathered): Some of this stuff matters to more advanced users, others may not care
- IT WILL display the COLOR CODE or RAN (and apparently Area Code) (and can be programmed for a specific code)
- WILL NOT DISPLAY TALKGROUP NUMBERS. So you won't know what talkgroup is actually transmitting. You won't be able to only listen to a particular talkgroup and not another one.
- WILL NOT DISPLAY UID/RIDs (Radio ID numbers). So you can't differentiate those talking or name the radios in the software
There is not enough room on the screen for this, plus with this type of scanner (Banks), I don't think it could work with a list of RIDs.
- WILL NOT have "1 FREQUENCY DMR" type "UNIDEN TRUNKING" programming. You just enter in a frequency and it decodes the audio, but is not giving you the information (if you want, like, or are used to it in the previous models). This does not have the architecture, this is a BANK memory. (hardware driven radio, not software)
- According to the Owner's Manual, it will show if the frequency is CAP, CON, DT3, DMR, IDS, NX4, NX8, XPT, P25/DAT (which will be skipped)
We don't know what the future of Rail Scanning is going to be like when it moves to NXDN. There may or may not be any talkgroups in use, but I'm sure there will be Radio IDs. (some conventional NXDN uses talkgroups, but a majority just use "Group Call") 2 different railroads can use 2 different RAN codes. Are you able to program if for only 1 code (so you don't have to hear the other one?)
All I'm trying to do, it help those that just want to go out and buy one immediately without thinking about it's full capabilities.
I have not found a manual PDF yet. BCD160D Manual PDF BCD260DN Manual PDF (It appears that the 260DN manual for English may have been uploaded as the French version)
All the photos that I've see are very generic. The programming software really doesn't show a lot either.
Uniden SDS-100 / SDS-200
- Uniden Firmware Changelog - https://info.uniden.com/twiki/bin/view/UnidenMan4/SDS200FirmwareUpdate#SDS200_Firmware_Update_Change_Log
Waterfall Option Buy the Upgrade
- Waterfall Feature Manual (PDF)
- Features explained on YouTube by HAMTech Start-Up Guide (Zip Scanners)
- 12/23 - Waterfall/Firmware Update - https://forums.radioreference.com/threads/future-sds-firmware-to-include-waterfall-option.463094/
- 12/23 - Waterfall/Firmware Update - https://forums.radioreference.com/threads/new-sds-firmware-2023.466918/
- 12/23 - RDforum.org - https://www.rdforum.org/threads/134482/
Uniden Trunking Display Codes
• CAP. Capacity Plus/Linked Capacity Plus site’s voice and data in DMR system.
• CON. Connect Plus site’s voice and data in DMR system.
• DT3. Trunked DMR site’s voice and data in ETSI Standard Tier 3 system.
• DMR. One frequency DMR site’s voice and data/Simplex DMR voice.
• IDS. IDAS in NXDN system.
• ND4. NXDN 4800 Direct Frequency
• ND9. NXDN 9600 Direct Frequency
• NX4. NXDN 4800 NEXEDGE
• NX9. NXDN 9600 NEXEDGE
• NXD. Unknown NXDN system
• XPT. Hytera XPT site’s voice and data in MotoTRBO system.
• P25/DAT APCO P25
Understanding Favorite Lists / Quick Keys on Uniden Scanners
GPS Features on Scanners
- Program each frequency with Coordinates (latitude and longitude) and a radius. While travelling, with your GPS attached, the scanner will move through the frequency lists that in in the area of the radius that you are
Trunking Discovery on UNIDEN
- Helps you find talkgroups. Start it and return later to see the active talkgroups and listen to activity to determine usage.
Analyze / LCN Finder on UNIDEN
- You can Analyze a TRS for site number, site SDS200 Analyze Function (by mesascan)
- You can use LCN finder on a CAP+, CON+, CAP MAX, NXDN systems.
- If you only get a partial number of LCN's detected, you can back out and it will ask you if you want to save the found LCNs.
- LCNs are the same as Channel Numbers. LSNs are .........................
Additional Information
- Uniden LCN Finder Feature - What some people don't realise about LCN Finder.(by VicRadio Zone)
- Uniden SDS100 Scanner LCN Finder (by Steve St Denis)
- Uniden SDS100 - How To Discover and Program DMR Cap+ Systems (by Boy and a Scanner)
Whistler Scanners
Radio Shack Scanners
GRE Scanners
AOR Receivers
ICOM Receivers
Racing Electronics
- Website Facebook
- Scanners, Receivers, headsets and gears for racing fans Webpage
- Provides rental service at major racing events
REceiver
- Webpage
- Miniature VHF receiver, with 2 programmable and scannable presets with LCD screen, stereo/mono audio in/out ports, adjustable volume, compact size
RE3000 Scanner (450-470 MHz)
- Over-the-air programmable, 440 Channel programmable, zero latency
Scanner Mounts
- Home, Car, Bike
- 3D Printer Technology
SDRs - Software Defined Radios
- SDS100, 200, many of the latest models of scanners.
- SDRs...
- SDRTrunk Software Discussion
- DSD+ Software can also be used
Railroad Monitoring (Railfanning)
- AAR Channels
- Future NXDN
- Using Two-Way Radios as a "Scanner" is great for railroad monitoring. Everything must be in the same band ***
- BCD125 is a great scanner for Railfanning
Related Websites
- The web is FULL of Railfan and Railroad related sites and there a lot of groups on Facebook.
Related Videos
- Danny Harmon at Distant Signal One of the best narrators on the air. Facebook page
Other Scanner Features / Mobile Device Aps
Two-Tone Paging / "Fire Tone-Outs"
- Phone Apps for decoding the proper tone for Fire/EMS pagers
- Phone Apps for CW-ID (Morse Code transmitting tones)
Scanner Programming Software
- Note
- Most/all scanner programming is set up for WINDOWS OS. If you are using a Mac, you'll have to use Parallels, etc.
- ButTel Software by Gommert
- FreeSCAN For Uniden SC230, BC246T, UBC3500XLT, BR330T, BCD396T, BC346XT(C), BCD396XT, BCT15X, BCD996XT, BCT15 and BCD996T, BCD996P2 only
- ProScan For Frequency logging, audio recording, desktop control and internet streaming.
- Uniden Sentinel Update your scanner's Firmware and the scanner's internal RadioReference database RR Wiki info
- PSR Edit
Feature requests for New/Future Scanners?
- GPS inside the unit.
- More durable standards like used on Motorola, Kenwood name brand 2-way radios
- Waterproof/IP-68 (see above)
- Cradle charging / Drop-In Chargers (with antenna port?)
- Batteries (like 2-way where you can have additional pre-charged batteries available)
- USB-C Charging
- BLUETOOTH for listening AND programming from PC. (Program from your home to your mobile in your car....)
- Program from Android/iOS (see Remote Head)
- Voice announcements (tuning/programming etc) for the seeing impaired
- REMOTE head (or ability to see on a phone/tablet screen) (Make a specific type of display/phone for remote heads)
- I.F. Out with Discriminator Tap (ready to use)
Pagers
Unication
- These are actually made and marketed as "Pagers", but these receivers have excellent reception of P25 simulcast systems.
- They can only receive ONE P25 Trunked System at a time.
Two-Tone Paging
- National Weather Service alert tone, 1050 Hz.
- adding the 2-tone protocol is under tab C. https://www.unicationusa.com/_files/ugd/9bbbf0_7118b145436e4a8ea49908f00070f911.pdf
Weather Alerts
Outdoor Warning Sirens
Originally started out as "Civil Defense", as "Air Raid Sirens", until after the war scar was over, these sirens often got used for alerting the local volunteer fire departments of a fire. Later use included severe weather warning alerts. It took many years for these to go away, although some places are still using them. Most places have upgraded to citywide siren systems, that can be most useful for OUTDOOR warnings to the public. These are usually a form of DTMF "tones", data or digital radio traffic.
Sirens are sometimes integrated into a warning system that links sirens with other warning media, such as the radio and TV Emergency Alert System, NOAA Weather Radio, telephone alerting systems, Reverse 911, Cable Override, and wireless alerting systems in the United States and the National Public Alerting System, Alert Ready, in Canada. This fluid approach enhances the credibility of warnings and reduces the risk of assumed false alarms by corroborating warning messages through multiple forms of media. The Common Alerting Protocol is a technical standard for this sort of multi-system integration
Siren installations have many ways of being activated. Commonly used methods are dual-tone multi-frequency signaling (DTMF) or public switched telephone network (PSTN) using telephone lines, but activation can also be done via radio broadcast. This method opens up vulnerability for exploitation, but there are protections from false alarms. These sirens can also be tied into other networks such as a fire department's volunteer notification/paging system. The basics of this type of installation would consist of a device (possibly the same pager the firefighters have) connected to the controller/timer system of the siren. When a page is received, the siren is activated
DTMF - https://www.techtarget.com/searchnetworking/definition/DTMF
NOAA Weather Radio
- Move info from above, list frequencies, information about F.I.P.S
- Most scanners of lately, have been capable of receiving S.A.M.E. codes /NWS and alert xxxxxxxxxxxxxxxxxx
Midland WR-100 NOAA All Hazards Radio"
Dispatching Solutions
Zetron
Motorola Dispatch Consoles
- Motorola MCD 5000m Deskset System With MOTOTRBO
- AVETEC INC (Part of Motorola since 2019) [Scout EX, Scout E8, Scout E4 and Scout E1 console https://www.datatronicscom.com/motorola/avtec/]
Miscellaneous
- RadioPro Radio Over IP Solutions For Pcs And Mobile Devices; provides remote access to Motorola MOTOTRBO radios via IP Networks.
- SafeDispatch Professional Client-Server Integrated Dispatch Solution
- SmartPTT Basic Integrated Solution For MOTOTRBO
- TRBOnet Enterprise Award-Winning IP Dispatch System
Miscellaneous
Two-Way Radio
- Battery Types
- PC Programming (vs. Mac/Apple)
License Free
- CB Radio how has FM mode available!
- FRS (*shares some frequencies with GMRS)
- MURS
GMRS
Midland MXR10 GMRS Repeater
- AgriStudios for use on Farms (YouTube). Comes with a really nice antenna
- Programming cable and Windows PC to customize frequency / tone
Amateur Radio
- Coming soon SEE BELOW
Types of Users
- Air-Medical
- Agricultural (Farms, Seed Companies/Fertilizer, Riverside Facilities to fill barges***) (also see Related Trucking in Transportation)
- Attractions (Amusement Parks, Museums, Monuments, Sports Stadiums, Tours (Boats), Zoos.....
Airband / Aviation
AM Aviation Frequencies All frequencies here use AM (emission designator 6K00A3E).
- 121.5 Emergency & Distress
- 123.1 Search and Rescue (SAR)
- 122.9 Search and Rescue (SAR) Secondary and Training
Emergency Position-Indicating Radio Beacons (EPIRB), Emergency Locator Transmitters (ELTs), and Personal Locator Beacons (PLBs) transmitters operate on 406.0 to 406.10 MHz, and some have low power 121.5 MHz homing beacons. Older ELTs use 121.5 MHz, which is also the civil aviation voice emergency frequency, and are still in widespread use. Aviation Notes:
- Communications with aircraft in the public safety environment is complex and carries additional risks over traditional land mobile radio. Communications occur in both AM and FM modes. AM Communications are typically for pilot to pilot, pilot to tower, pilot to ARTCC, etc. It is less frequently used for tactical Air-to-Ground communications. Extreme caution must be taken with AM Airband frequencies, these are the least desirable choice for Air-to-Ground communication. While not necessarily prohibited, it presents much greater risks to aviation assets than using a discrete Public Safety FM channel.
- Most Air-to-Ground (A/G) communications occur on FM in the traditional FM VHF, UHF, 700 and 800 MHz bands. Careful coordination of these channels is critical. Frequencies coordinated specifically for that use should be employed. Many jurisdictions have set aside or in some cases licensed specific Air to Ground FM channels in most of the bands. These allow the users to communicate with air assets in a safer environment. A concern with any airborne transmitter is the extended range of the transmission when airborne. It is often the case that an aircraft can broadcast substantially further than the license limitations of the local licensee or user, possibly resulting in unintended interference to other agencies and to the aircraft itself. When multiple aircraft operate in the same theatre of operations, frequency deconfliction and tasking coordination will prevent confusion
- AWOS/ASOS/ATIS - ASOS stands for Automated Surface Observation Station. It is a type of automated weather station that broadcasts important weather details continuously on a specific radio frequency. ASOS is managed, maintained and controlled by NOAA rather than the FAA or the organization that operates the airport. ASOS reports conditions in the immediate vicinity of the airport. At larger towered airports, you may see a human-monitored Automated Terminal Information Service (ATIS) issuing reports rather than AWOS or ASOS.
- Businesses (Small, Medium, Large - include major industrial plants and factories) SCAN-AID Businesses Churches, Microphone
- Colleges and Universities
- Emergency Management (Local, County, State, Federal) (Private agencies)
- EMS (Private and Municipal)
- Federal Government (Law Enforcement, United States Postal Service
- Hospitals, Healthcare, Skilled Nursing Facilities and Retirement Homes
- Hotels, Motels
- Itinerant
- Industrial (Factories/Plants) (Automotive, Steel,
- Manufacturing (Assembly, creation or production of goods with the help of equipment, labor, machines, tools, and chemical or biological processing or formulation.)
- Maritime
- Media (TV, Radio and formerly newspapers, as businesses entities)
- IFB Remote Equipment etc. MARTI, Microphones, News Helicopters, (also UNICOM 121.025??)
- See Eavesdropping on TV Studios YouTube Video
- Military (related to Federal)
- Natural Resources/Conservation/Forestry
- Outdoor Warning Siren (Data)
- First known as a Civil Defense Siren (WikiPedia)
- Property Management, Facilities Management (?)
- Public Safety (911, Sheriff, Police, Fire, Rescue, Public Works)
- Fireground, Tac/TAC/Talk-Around, Car-to-Car, Interop, All Call, All Talk Group/ATG, Common, etc.
- Radio Leasing / Radio Companies
- Railroads and related Recovery Companies SCAN-AID Railroad
- Recreation (Sports, Golf, Water activities/Swimming, Fishing, Parks,
- Retail (Stores, Restaurants, Malls)
- Schools (Public, Private)/ School Transportation
- Search and Rescue Teams
- Security (Private, Contracted, Cash-in-Transit <Brinks>,
- Service Companies (HVAC, Plumbing, Repairmen...Concrete, Construction,
- Tow Trucks/Roadside Assistance
- Transportation (Cabs/Taxis, Transit, Light Rail, Ferries, etc, Trucking) (also see Railroads above)
- Utilities (Cable/Fiber/Internet, Telephone, Electric, Gas, Water, Sewer)
- Warehousing/Distribution Centers/Refrigeration-Cold Storage (Walmart, Amazon.....)
- Weather (NOAA Weather Radio) + SKYWARN/Amateur Radio repeaters, also see Emergency Management
FCC Part 90 Common Station Class Codes
- FB - Base Fixed Location Base Radio at a specific location authorized to communicate with mobile stations
- FB2 - Mobile Relay Fixed Location Repeater – Conventional, decentralized trunking, or centralized trunking (frequency band specific)
- FB4 - Community Repeater Fixed Location Repeater – Conventional operating with multiple CTCSS or CDCSS
- FB8 - Centralized Trunked Relay Trunked Radio Systems below 512 MHz
- FB2T - Mobile Relay – Temporary Mobile, Temporary or Tactical Repeaters
- FX1 - Control (Control Station) Fixed location base radio that operates through a mobile relay (repeater) in the same way a mobile station operates
- 6.1 - Control (Control Station) Control Station – Antenna height below 20 ft to tip (6.1 Meters)
- MO - Mobile Handheld and vehicular mounted radios intended to be used while in motion or during halts at unspecified points
- MOI - Mobile - Itinerant A similar station class to mobile (MO), but no interference protection is provided from other itinerant operations.
- MO3 - Mobile/Vehicular Repeater Simplex radio attached to a vehicular mounted radio to extend range
- MO8 - Centralized Trunk Mobile Handheld and Vehicular Mounted Radios operating on trunked radio systems below 512 MHz
Two-Way Radio FCC Frequency Licensing
See bottom of page??????????????????????????????????
Brands
- BendexKing (NFM and P25) (different model radios can be cloned with others)
Harris
JVC/Kenwood
- VP8000 (similar to Motorola APX8000) EFJohnson/Viking product Video 1 Video 2 (by W3AXL) Armada programming is fast and easy. Wi-Fi and bluetooth programming.
- larger than APX8000, but weighs less
Motorola
- DMR will probably never be available in a Public Safety grade portable radio (that also has P25)
Motorola APX8000
- Public Safety grade (P25)
- Programming Software is slow. Wi-Fi and bluetooth programming.
Watch Duty Echo Project
- Inside Watch Duty’s Echo Radios: Remote Listening, Tone Detection, and Early Warning
- Announced Dec 2022, Echo Project for capturing first responder radio communications deep within the wildlands of California and beyond. Watch Duty reporters, (much like traditional news reporters, government contractors, and even utility companies like PG&E) use handheld radio scanners and internet-based scanners to listen to first responders during an emergency. This is how we make sense of what is going on in real-time, between the daily official press briefings to keep residents up-to-date. As it turns out, PG&E and CalFIRE contractors, like dozer operators and water tenders, do precisely the same thing. Contractors and agencies working across multiple regions and states, use the online radio streaming service Broadcastify.com to listen to local radios in multiple regions.
MPT1327 / TETRA
Flyde Micro
Fylde is a co founder and current world leader in the design, manufacture and supply of MPT1327 radio trunking networks. Fylde delivered the first ever true MPT system to British Telecom back in 1986 and installed it on the Post office tower in London. This was closely followed by the first multi site systems.
Fylde also actively contribute to the generation and implementation of the new dPMR and DMR digital radio standards and hence are totally aware of the complexities of implementing these standards. It is the Fylde way to always ensure compatibility and upgrade paths for current and new users to our systems.
DSD Plus
- Will show as "DMR(FLYD)" on decode
Frequency-Hopping Spread Spectrum (FHSS)
AMATEUR RADIO
- WELCOME, info
Amateur Radio Brands
Ailunce
Baofeng
Icom
Kenwood
Puxing
- Radioddity Also an authorized distributor of Baofeng, TYT, QYT, Xiegu ) ALSO
Retavis
RT-99 Mobile/Base Website Manual - VERY LIMITED Info (PDF)
- Operate/Program with phone app. Love this radio! 50W VHF/40W UHF
TYT
TH-9800
- TH-9800 User Manual (radio is "comparable" to Yaesu FT-8800
- VGC VR-N7500 is identical radio Review
- My notes: This radio nearly operates the same as the Yaesu FT-8800. It has more some more options available in menu, but is limited on some other features. After being installed for a bout a year at home, this radio stopped receiving properly and just sounded like the squelch was turned all the way down. No longer able to use this "cheap" knock-off radio.
Yaesu
Radioddity GD77 & TYT MD-380 are the same radio. BETTER than GD 88 opengd77.com radiosification.blogspot.com /YT video Color Code Scan and Time Slot Filter, CRC ignore (gets around RAS on motorola)
Amateur Radio Features
- Cross-Band Repeat (works like a Mobile Extender/Vehicular Repeater)
- DMR
- Fusion (Yeasu C4FM)
Related Videos
- Build a "Go Anywhere Box" for your Ham Radio (by Ed Whitney, on YouTube)
- Amateur Radio Go Kit Demo (by David Fernandez, on YouTube)
- ICOM IC 7300 Ham Radio Go Box (by Ham Radio Crash Course, on YouTube)
- Build and EmComm or Radio Go Box (by Gadget Talk, on YouTube)
Microphones
PORTABLE RADIOS
- 2-3 common type of 2-Pin microphones used on portable radios (Amateur/xxxx) Non-Motorola
MOBILE / BASE RADIOS
- Type of connections, old round, network/phone looking type.
BLUETOOTH
- Speakers, Head Sets, Ear Pieces, Ear Buds, etc
- Microphones, programming
- BT Recommendations
911, InterOp and Related Agencies
- Enhanced 911 and Next911
- National Public Safety Telecommunications Council
- APCO
Learning Tools for Telecommunications/Dispatcher
Federal Emergency Management Agency (FEMA)
- IS-100.C: Introduction to the Incident Command System, ICS 100
- IS-200.C: Basic Incident Command System for Initial Response, ICS-200
- IS-700.B: An Introduction to the National Incident Management System
- IS-800.D: National Response Framework, An Introduction
- ICS-300: Intermediate ICS for Expanding Incidents (Classroom Delivery Only)
- IS-144.A: TERT Basic Course
911 / Emergency Medical Dispatcher (EMD) / Telecommunicator Resources
International Academies of Emergency Dispatch
Priority Dispatch
- [https://prioritydispatch.net/discover-totalsystemsolutions/ Priority Dispatch Introduction
ProQA Software
- Discover ProQA for Police/Fire/EMS call-taking
- Priority Dispatch ProQA codes may be using on some dispatch broadcasts. You can find the codes elsewhere on the internet.
CritiCall 911
- Website for Dispatcher/Call-Taker Testing and Training
Dispatching Radio Screen Software
Motorola's Touchscreen Consoles
- Tech Global makes touchscreens that can be used by dispatchers, etc.
AVTEC Scout
Miscellaneous
- eDispatches.com eDispatches automatically detects audio dispatches as well as CAD dispatches and delivers notifications directly to your members’ mobile devices. Receive your dispatch via mobile app, text message or by phone call – all with no effort whatsoever from your dispatch center.
Field/Mobile Radio Communications
- See DVRS/Vehicular Repeater/Mobile Extender
- SOW/COW
Training Videos'
- How to better communicate with dispatch with Cottleville Fire Chief in St Charles County MO
INTEROP
SAFECOM
- Writing Guide for Standard Operating Guidelines (Aug 2023 PDF)
- SAFECOM The Transition to Advanced Encryption Standard White Paper (PDF)
- Federal Partnership for Interoperable Communications working with SAFECOM/CISA
- National Council of Statewide Interoperability Coordinators working with SAFECOM/CISA
- [cisa.gov/national-emergency-communications-plan National Public Safety Telecommunications Council****Name]
National Interoperability Field Operations Guide (NIFOG)
- Has been updated to version 2.01 and can be viewed and downloaded by clicking on the link below. New content in 2.01 includes references on Information Technology, Emergency Wireless Carrier Services, Interference Management, Encryption, and Cybersecurity.
- The NIFOG is a technical reference for emergency communications planning and for radio technicians responsible for radios that will be used in disaster response. The NIFOG includes rules and regulations for use of nationwide and other interoperability channels, tables of frequencies and standard channel names, and other reference material, formatted as a pocket-sized guide for radio technicians to carry with them. DOWNLOAD NIFOG V 2.01 (PDF)
National Interoperability Field Operations Guide (NIFOG) Fact Sheet
- Has been updated to version 2.01 and can be viewed and downloaded at NIFOG Fact Sheet (PDF)
25 Cities Project Federal Interoperability Channels
- These are VHF channels that use FBI fixed infrastructure to provide wide area coverage for federal, state, and local public safety users. There are currently 56 channels, overseen by 31 FBI Field Offices. The primary use of the channels is for interoperable communications during both pre-planned and emergency events. The channels may also be available for internal agency communications. All pre-planned use must be coordinated with the local FBI Telecommunications Manager. All federal, state, and local public safety agencies are encouraged to program the 25 Cities frequencies into their land
mobile radio subscriber devices. Most 25 Cities VHF channels are accessible by non-VHF users via permanent or ad hoc patching capabilities provided to many agencies as part of the 25 Cities Project. Please note that in certain cities, the channels use the VHF Law Enforcement (LE) Federal Interoperability frequencies: Baltimore (BA LE 3); Boston (BS LE 4); Charlotte (CE LE 4); Honolulu (HNL LE 2, HNL LE 3, HNL LE 4, HNL LE 5); Kansas City (KC FIOLE2); Milwaukee (MW LE 4, MW LE3 GB, MW LE2 MA); Newark (NK FIO LE 2); Richmond (RH LE4); San Juan/Puerto Rico (SJ LE 2 ME, SJ LE 3 YQ, SJ LE 4 CS, SJ LE 5 CP, and SJ LE 2 STT), and Washington, D.C. (DC LE 2)
Frequencies listed at RR ???? and https://www.cisa.gov/sites/default/files/2023-02/NIFOG%202.01%20508%20FINAL.pdf
FirstNet LTE
The First Responder Network Authority (FirstNet) was created on February 22, 2012, under the Middle Class Tax Relief and Job Creation Act. FirstNet is an independent authority within the U.S. Department of Commerce's National Telecommunications and Information Administration. It is governed by a 15-member Board consisting of the Attorney General of the United States, the Secretary of Homeland Security, the Director of the Office of Management and Budget, and 12 members appointed by the Secretary of Commerce. The FirstNet Board is composed of representatives from public safety; local, state and federal government; and the wireless industry. These dedicated individuals bring their expertise, experience and commitment to serving public safety and meeting the FirstNet mission.
In 2017 Nextcom launched its FLEX branded 4G LTE two way radio service that provides instant, always-on communications between teams no matter where they are in the USA and Canada with no roaming fees, no licensing, no long distance and no overage charges. FLEX truly redefines "wide-area communications."
NEXTCOM EXPO - Radio Over Wi-Fi System Applications
For Hotels & Convention Centers, Supermarkets & Large Retail Shopping Malls, Warehouses, Stadium and Auditoriums, Hospitals.
Microphones for Two-Way Radios
Volume / Speakers / Line-Out
Volume
Rec. (Record) Line-Out
- Useful when recording your scanner audio for later review (using a PC program and/or programming software that keeps track of hits)
- Also see Broadcastify/Online Streaming
Bluetooth
- Adding Bluetooth earpieces to your scanner.
- Adding Bluetooth speakers to your scanner.
- Adding Bluetooth speakers to your Unication Pager Device
- Using you
Speakers
Live Scanner Feeds / Streaming
- Broadcastitfy
- Broadcastitfy Calls *****SDR Links
- OpenMHZ.com Listen to Police and Fire radio from across the US; or Broadcast
Squelch / Carrier Squelch / Codes
Squelch
- Squelch is used in two-way radios and VHF/UHF radio scanners to eliminate the sound of noise when the radio is not receiving a desired transmission.
Carrier Squelch
PL (CTCSS)
- CTCSS in the WIKI CTCSS on WikiPedia (some info shared below
- Continuous Tone-Coded Squelch System (CTCSS), Private Line (PL by Motorola ®), Channel Guard® (CG) by General Electric and generically as tone squelch
- CSQ, with 50 tones (originally 38)
It is a use of sub-audible tones that are transmitted along with the speech portion of the transmission which allows more than one agency (or fleet) to use the same radio frequency without hearing the other agency on that frequency. Receivers for agency XYZ are set to only open their audio squelch when the proper sub-audible frequency tone is part of the transmission.
Today the sharing of frequencies by agencies is less common than it once was, CTCSS is more commonly used by repeater systems to prevent noise or interference from causing the repeater squawk obnoxiously, and by receivers as an extra measure of squelch (for instance, to prevent engine noise from breaking squelch).
In addition to the standard tones, some manufacturers have made available additional tone frequencies specific to their own products, but not available to products from other manufacturers.
Because period is the inverse of frequency, lower tone frequencies can take longer to decode (depends on the decoder design). Receivers in a system using 67.0 Hz can take noticeably longer to decode than ones using 203.5 Hz, and they can take longer than one decoding 250.3 Hz. In some repeater systems, the time lag can be significant. The lower tone may cause one or two syllables to be clipped before the receiver audio is unmuted (is heard). This is because receivers are decoding in a chain. The repeater receiver must first sense the carrier signal on the input, then decode the CTCSS tone. When that occurs, the system transmitter turns on, encoding the CTCSS tone on its carrier signal (the output frequency). All radios in the system start decoding after they sense a carrier signal then recognize the tone on the carrier as valid. Any distortion on the encoded tone will also affect the decoding time. Engineered systems often use tones in the 127.3 Hz to 162.2 Hz range to balance fast decoding with keeping the tones out of the audible part of the receive audio (Courtesy WikiPedia)
- Many NATO military radios have a switchable 150.0 Hz tone. The list includes the following radios: AN/PRC-68, AN/PRC-117F, AN/PRC-117G, AN/PRC-77, AN/PRC-113, AN/PRC-137, AN/PRC-139, AN/PRC-152, AN/PRC-119, AN/VRC-12, AN/PSC-5, and Thales AN/PRC-148 MBITR. (from Wikipedia)
DPL/DCS/CDCSS
- CSQ....
- Standard codes
- Digital-Coded Squelch (DCS) system was developed by Motorola under the trademarked name Digital Private Line (DPL). General Electric responded with the same system under the name of Digital Channel Guard (DCG). The generic name is CDCSS (Continuous Digital-Coded Squelch System).
DCS (Digital-Coded Squelch), generically known as CDCSS (Continuous Digital-Coded Squelch System), was designed as the digital replacement for CTCSS. In the same way that a single CTCSS tone would be used on an entire group of radios, the same DCS code is used in a group of radios. DCS is also referred to as Digital Private Line (or DPL), another trademark of Motorola, and likewise, General Electric's implementation of DCS is referred to as Digital Channel Guard (or DCG). Despite the fact that it is not a tone, DCS is also called DTCS (Digital Tone Code Squelch) by Icom, and other names by other manufacturers. See DCS on WikiPedia
- The use of digital squelch on a channel that has existing tone squelch users precludes the use of the 131.8 and 136.5 Hz tones as the digital bit rate is 134.4 bits per second and the decoders set to those two tones will sense an intermittent signal (referred to in the two-way radio field as "falsing" the decoder) (From WikiPedia)
* In this same sense, RadioShack/GRE/Whistler scanners may show 136.5 PL on a poorly received transmission using DCS.
Digital Modes
NAC
- Used in P25, conventional and trunking, often pronounced as "Nack" or "Nax" (plural), but can be said as "N" "A" "C". Can be abbreviated to "N" or $, ie $070
- See (under P25)
Air Ambulance / Helo / MedEvac
- GMR AirEvac Lifeteam AEL
- arch.... etc
Frequency Hunting
- How to finding New and Exciting monitoring opportunities
- Just because your local Police are encrypted, doesn't meant you can't find new ways to continue your hobby.
Scanning Bands
- Pre-programmed ranges in your scanner
- Self-specified ranges in your scanner
- These ranges can also be defined to scan during your regular scanning sessions.
- Keeping track of Radio IDs on DMR, P25 and NXDN systems. (what you here in the clear, may help identify what is being used on an encrypted talkgroup)
Trunked Radio Decoders
- Some professional monitors, scanners and all SDR
- ]https://wiki.radioreference.com/index.php/Trunked_Radio_Decoders RR Wiki Trunked Radio Decodes]
- Common scanners, capable of decoding
- Note
- I have yet to have time to get an SDR dongle working. All of my decoding is done through scanners with DSD+ and pro96com
DSDplus / DSD+
- V2.457 Available 12/23/23
- Software checks for updates automatically or you can check for updates manually using the menu selection.
- Email dsdplusfastlane@gmail.com if you are having subscription problems.
- FastLane Updated 2.457 12/27/23 https://forums.radioreference.com/threads/dsd-2-457-availible.467125/
- LRRP - Location Request/Response Protocol
Notes/Future Explanations
- "Found Rest Channel
pro96com P25 decoder
- pro96com P25 Control Channel decoder for xxxxxxx
- Where data files are stored
Other Programs
- UniTrunker
- SDRtrunk Releases
- Channel Extractor Pro v1.0.2.4 (in development 1/24)
- PDW Paging Decoder Software
Apps
- Phone - Morse Code etc.
Statewide/Areawide Radio Systems
- ALMR Alaska Land Mobile Radio (VHF) System Website
- AWIN Arkansas Wireless Information Network Wiki
- STARCOM21 Illinois Extensive Wiki with RID Listings
- SAFE-T Indiana
- MOSWIN Missouri Statewide Wireless Interoperable Network (See more down the page)
- https://www.radioreference.com/db/sid/1085 SALTER St. Louis Area Trunked Emergency Radio]
- WISCOM Wisconsin Interoperable System for Communications
- Minnesota Allied Radio Matrix for Emergency Response (ARMER)
- Michigan's Public Safety Communications System (MPSCS)
- TACN Tennessee Advanced Communications Network
Trunked Radio Systems
Motorola
Type 1, 2
- PrivacyPlus
- Ion
Tait
- Tait Radio Academy Learn everything there is to know about LMR radio communications
Hytera
- Pseudo Trunking, basically a single freq DMR repeater with 2 time slots/talk paths. Users are normally assigned a time slot, if group A is talking and group B is on the same slot they can't key up while the channel is busy, even if the other slot is open. Pseudo trunk dynamically lets group B use the other slot. This is a single freq trunking system.
- Multiple repeaters at a site Hytera has XPT, extended pseudo trunking, which makes each slot in any repeater a resource available to any user so they don't have to change channels to find an open slot.
JVCKenwood NXDN
- EF Johnson Training
- LTR
LTE
- Cellular/Wi-Fi based radios
DIGITAL MODES / other
Monitoring MOTOTRBO (DMR) and NEXEDGE (NXDN)
Discriminator Tap "Output"
https://wiki.radioreference.com/index.php/Discriminator_output
https://www.discriminator.nl/disc-out/index-en.html Receives ......
DSD Plus https://wiki.radioreference.com/index.php/DSDPlus TIPS 'N' TRICKS Error Code: "fm demodulated p25p1 psk signal detected"
DMR Tier III Hytera vs Tier III CapMax (Motorola)
https://forums.radioreference.com/threads/fastlane-errors.466165/
Then, throw in a system like Selex / Leonardo ( search here for: Goosetown Tier III ). It is not a CAPMAX system, but it does not use an Area ID and does not require +1'ing the bits in the Syscode. Unfortunately, there is no OTA information sent that allows DSDPlus to distinguish that it is a Selex system, so DSDPlus presumes its a DMR TIII Standard system and shows AreaID+SiteID and +1's the bits. I agree, after a few years of seeing TIII systems now, that it would be better to never present the AreaID+SiteID information for a system -- and instead they should be presented as just a model, network ID, and SIte ID. But, I have a feeling DSDPlus would require a significant revamp to do this, and would then require everyone to change how they present aspects of a TIII system in the DSDPlus.* files. But let's assume that miraculously every piece of software was on the same page using Network Model, Network ID, Site ID. There is still the issue of any software knowing precisely when a SysCode is not presenting "the facts", for every TIII system variant, and thus needing to be +1'd. I don't think any software developer is every going to get DMR TIII (including all variants -- standards compliant, Capmax, Selex, etc) 100% all the time because we do in fact know that in the DMR TIII standards there is actually an Area ID and a Site ID, and that there is a very important variable (LA -- length of Area) that is not sent over the control channel / not sent in the SysCode information -- there making it impossible to get the Area ID + Site ID combination correct 100% of the time. GRE/Whistler scanners can't tell the difference and don't truly trunk track and maybe can't even handle TIII. Uniden scanners can't tell the difference between 100% standards compliant TIII systems and variants like CapMax and Selex. Uniden treats them all the same. SDRTrunk appears to treat them all the same (taking in no account for Area ID+Site ID or +1'ing), but I may be wrong about that -- there may be circumstances where SDRTrunk does +1'ing . I do not use it enough to know. And for anything else handling TIII, I'm pretty sure they aren't attempting to display AreaID+SiteID.
Digital Modes
DMR/MotoTRBO
- Whistler DMR explanation Motorola DMR Explanation
- Wiki related for personnel or hobbyists who work with Motorola Solutions' MOTOTRBO product portfolio
- MotoTRBO System Planner (PDF)
Modes
• Direct mode
• Repeater mode
• Through a repeater in conventional single site mode
• IP Site system is configured through a set of repeaters in IP Site Connect Connect mode.
- Tait recommends not using simulcast in DMR. See LINK (PDF)
• Capacity Plus Single Site system is configured by trunking a set of repeaters in Capacity Plus Single Site mode.
• Capacity Plus Multi Site system is configured by trunking a set of repeaters connected across multiple sites in Capacity Plus Multi Site mode.
- Can be configured to operate in analog mode, digital mode, or in both modes
• Dynamic Mixed Mode (DMM), MOTOTRBO uses a pair of physical channels configured for 12.5 kHz channel bandwidth for digital operation and analog operation. The repeater dynamically switches between analog and digital modes based on the call it receives from radios. If an analog radio transmits, the repeater switches to analog mode to repeat the analog call. However, the repeater only repeats analog calls that are qualified by PL (DPL/TPL). If a digital radio transmits, then the repeater switches to digital mode to repeat the digital call if the call uses the right color code. While the repeater repeats one analog call at a time, it can repeat 2 digital calls at a time, one on each logical channel.
Call Types
- Group Call - Everyone on your "Channel" (talkgroup) can hear you and respond
- All Call - Everyone on your whole system can hear you and respond (Emergencies, etc.) [Capacity Plus or higher]
- Private Call - Find the employee in your contact list and call directly (Only you and the other radio can hear the call) [Capacity Plus or higher]
Restricted Access to System (RAS)
- Used by MOTOROLA systems only
- Information courtesy DJOWH
- This feature prevents unauthorized subscriber users from using the repeaters in the system. It also offers some protection to prevent unauthorized subscribers from listening to any repeater outbound voice/data transmission.
- RAS is not a privacy feature and if voice privacy is a concern, Basic Privacy, Enhanced Privacy, or AES should be used. It is supported in all MOTOTRBO system configurations – Conventional Single Site, IP Site Connect, Capacity Plus, and Linked Capacity Plus.
RAS provides two methods to prevent a subscriber from accessing the system:
- RAS Key Authentication // Radio ID Range Check
These two methods are independent of each other and may be enabled/disabled separately or together. When used together, they provide a robust and flexible way to control the users access to the system.
RAS on LCN decoding
- Since RAS keeps unauthorized radios from accessing the system, it may also foul up your attempts to get a proper LSN/LCN for a CAP+/Tier III/CON+ system.
- RR Forum Post
- Some DMR mobile radios can be set to "PROMISCUOUS" mode, which will allow you to LISTEN to the system.
Rest Channel / Timeslot
DMR Networks
DMR Network Layout/Size
- T (Tiny) S (Small) L (Large) H (Huge)
- Huge network model we can set up up to a total of 1024 sites
LRRP Data
- Location Request Response Protocol
- Uniden Scanners (x36 and SDS), LRRP will cause the scanner to falsely flag the system as "CAP". So some unsuspecting users may think a frequency is CAP+, and has the standard Cap+ beacons, when really it's just LRRP doing it's thing to confuse the easily confused Uniden scanners. Info courtesy W1KNE
Capacity Plus - Single Site (CPSS)
- No trunking controller, the repeaters and subscribers contain all necessary trunking logic. 1 of the Repeaters will be a "Master"
- There is no dedicated Control Channel, instead a rolling "rest timeslot" is used
- A total of 20 networked devices on the site (repeaters, RDAC* or PCs) -- Up to 8 trunked repeaters (16 time slots) and 12 data revert repeaters.
Data Revert - The GPS Revert Channel feature allows system to off load radio transmitted location updates onto a programmed digital channel that differs from the digital Selected Channel. This feature effectively removes Location Update traffic from the Selected Channel in order to free up that channel. The GPS Revert Channel also allows a large group to communicate on a single voice channel while sending location updates on multiple GPS Revert Channels to accommodate larger Location Update loads. Each channel programmed into the radio has a configurable CPS option to designate the GPS transmission channel on which it transmits Location Update messages. The CPS options for the GPS transmission channel are Selected, All, and None. - Choosing Selected means that the GPS updates are transmitted on the current channel. - In the case of All, a single channel must be chosen from the list of all channels. This chosen channel is known as the GPS Revert Channel and this is where GPS updates are transmitted on.
- Up to 255 talkgroups
- Rest Timeslot - Rest "Beacon" messages; when all timeslots are busy, the rest timeslot can be a voice timeslot
- "Channel Pool" Frequencies with times lots available.
- Terms: Personalities, Voice Lists, Subscriber Radio, "Slot ID" same as LSN,
- Polite vs Impolite - being able to talk over a radio already using the talkgroup
- Higher priority only to All Call and Emergency Calls (can trigger a channel to impolite) WILL NOT break into current conversations.
Capacity Plus - Multiple Site (CPMS)
May also be called MotoTRBO Linked Capacity Plus
- Multi-site dynamic trunking, large groups across a large area. through an IP
- Up to 15 locations with up to 8 repeaters on each site (16 timeslots), 1600 users on each site. Up to 11 (or 6) data revert per site (GPS, etc),
- Up to 255 talkgroups. Ideally can support 100 subscribers per slot.
- 1 master Repeaters with peers, If the master repeater goes down, the network picks up the rest, with a pair of timeslots probably missing
- The master repeater contains a list of rudimentary fleetmap that lists all of the sites in the system, and a list of the talkgroups, and which sites they should be networked to.
- All repeaters carry traffic from all talkgroups, unless it's turned off during setup. Some talkgroups may only be set to transmit on specified sites.
- Individual calls (Private Call/iCall) are only placed on the source and destination site.
- Location information not available, whether a radio is turned on and which site it is on.
- Main advantage is added subscriber capacity that has the ability to share calls across multiple sites.
- With IP Site-Connect Ability to link sites together that are on different bands (VHF, UHF, 800)
- Neighbors HAVE to have overlap coverage, for handing over during roaming
- Each site has to have it's own router/network,
- Adding more data radios or shortening the GPS update period could drive the need for more revert slot, or the need for enhanced GPS on the system
Capacity Max
- Dynamic Site Assignment, Call Queuing, Priority and preemption.(available on TIII or greater, not on capacity plus)
Hytera XPT
Tier III" Non Standard vs Standard
Connect Plus
TRBOnet Plus
- Based on TRBOnet Enterprise, support for all TRBO systems; sold and supported by Motorola
- IP-based, integrated, AMBE vocoder, Modular based, Scalable, Direct IP interface to repeaters, remote administration
- GPS, Telemetry, Voice Recording, Automation, Fleet Management, Event logging, Text Messaging/Email, Job Ticketing, EBT, Phone Interconnect, Alarm Management, RF Coverage Management, Location Tracking, Indoor Positioning
- Multiple dispatch position, Each dispatcher can set up their position as they like
- System Bridging with 2 different system, Analog radios can migrate to the system
JVCKenwood DMR-S Trunking
- Information courtesy KD4EFM
- RR Thread on Up to 15 sites max, up to 8 repeaters per site
- S-Trunking is a JVCKenwood proprietary DMR-based TDMA Trunking system.
- There is support for DMR Tier 3 Trunking, and it's centralized trunking relay system that has exclusive control channel (FB8)*.
- Conforms to shared channel license environments, by: the TSCC is basically transmitted in intervals (data pulses). It negates interference to neighboring systems unlike the other equipment out there.
- Reference: ETSI TS 102 361-4 (DMR Tier III Trunking Systems)
- Shared channel (FB6) and Exclusive control channel (FB8) as defined by the FCC
TIER 3 Hytera
Tait Tier 2/3 IP-Based Simulcast
- Tier2
Simulcast achieves wide-area coverage with multiple (geographically separated) repeaters using the same receive and transmit frequencies. A digital voter is used on the receive sites to determine the best signal to relay. Simulcast is very useful when multiple frequency allocations may be hard to obtain, and reusing the same frequencies over a large area is more cost-effective. It also reduces channel changing and the number of re-registrations on a network.
Simulcast can also be DIFFERENT frequencies as each site. This eliminates the chance for distortion between transmitting sites.
- Tier3 Express (up to 6 simulcast sites)
- Tier3 Express20 (up to 20 simulcast sites with High Availability redundancy option)
- Tier3 Full Solution
DMR Tier III Motorola MOTOTRBO Capacity Max
- Motorola Video from 2015
- Can cover 15 facilities, 29 voice/data per site, additional 12 data channels per site.
- Advanced Location Tracking, Remote programming, Enhanced Security
- You might not see the LCN for the control channel that you're decoding in the control channel messaging.
- You may be able to calculate the LCN for the frequency that you're decoding if they're using a standard channel raster.
- Typically the control channel is dedicated and typically there are not voice calls on the control channel. And without voice calls, you won't see the application discover the LCN. If there is another site, you might be able to see the peers (neighbor list) which will give you the LCN of the site.
DMR Association
Understanding FCC License information
- Name "City of", etc
- Address is address of licensee (NOT the transmitters). Could be the home city/state of corporate owner of an entity/business
FCC Station Class Codes (RR Wiki)
FCC Radio Service Codes (RR Wiki)
NXDN
- NXDN™: A brief overview | What is NXDN™ ? | NXDN Forum Website
- NXDN (sigidwiki.com) NEXEDGE (RadioReference) NXDN (RadioReference) ['http://www.nxdn-forum.com/what-is-nxdn/technical-specifications-of-nxdn/ NXDN Forum
- NXEDGE 12.5KHz/9600baud NXDN is called "Narrow NXDN" in the programming software. (*Kenwood language)
- Icom's iDAS: 6.25KHz/4800baud NXDN is called "Very Narrow NXDN" in the programming software. (*Kenwood language)
- RAN (pronounced "ran" or "R" "A" "N"
- Some of the very low end commercial/business radios that Kenwood sold would only do 4800NXDN.
- Very Narrow NXDN tends to have a bit better coverage. It uses 6.25KHz wide channels, so it's easy to stick it in between other users.
Narrow NXDN tends to not have quite as good coverage, but it benefits from having a wider channel/higher data rate, so if you are using the radios to transmit data, video, GPS location, etc. it can be a better choice. Discussion
NXDN uses FDMA, and a NXDN channel be either 12.5 kHz or 6.25 kHz wide. 6.25 kHz dual-channel systems can be configured to fit within a 12.5 kHz channel. This effectively doubles the spectrum efficiency compared to an analog FM system occupying a 12.5 kHz channel. The architecture of NXDN is such that two NXDN channels, within a 12.5 kHz channel for example, can be allocated as voice/voice, voice/data, or data/data.
Kenwood's brand for NXDN equipment is "NEXEDGE", while Icom's brand for NXDN equipment is "IDAS", or Icom Digital Advanced System.
NXDN 6.25 kHz (iDAS)
- Vocoder AMBE+2
- Codec Rate 3600 bps
- Transmission Rate 4800 bps
- Modulation 4-level FSK
- Peak deviation 1.05 kHz
- Symbol Deviation: 01 +3 +1050 Hz, 00 +1 +350 Hz, 10 –1 –350 Hz, 11 –3 –1050 Hz
Emission designators
- 4K00F1D 6.25 kHz single channel digital data (NEXEDGE)
- 4K00F1E 6.25 kHz single channel digital voice (NEXEDGE)
- 4K00F1W 6.25 kHz single channel digital voice and data (NEXEDGE)
- 4K00F7W voice & data ???
- 4K00F2D 6.25 kHz single channel analog CW ID (NEXEDGE)
NXDN 12.5 kHz (NEXEDGE)
- Vocoder AMBE+2
- Codec Rate 7200 bps
- Transmission Rate 9600 bps
- Modulation 4-level FSK
- Peak deviation 2.4 kHz
- Symbol Deviation: 01 +3 +2400 Hz, 00 +1 +800 Hz, 10 -1 -800 Hz, 11 -3 -2400 Hz
Emission designators
- 4K00F2D CW ID
- 8K30F1D 12.5 kHz single channel digital data (NEXEDGE)
- 8K30F1E 12.5 kHz single channel digital voice (NEXEDGE)
- 8K30F1W 12.5 kHz single channel digital voice and data (NEXEDGE)
- 8K30F7W voice & data
iDas
- 3 types of systems: Single site, Multisite system linking multiple sites together, and a intersystem system linking multiple multisite as one.
- IDAS (RadioReference Understanding iDAS thread
- System ID has an Integrator Code (0 to 15) and System Code (0 to 32767) [default 1-1]
- Site IDs have a range of 1 to 250; 0 and 251 to 255. are reserved
P25 (APCO P25)
- P25 (Wikipedia)
- Project 25 Compliance Assessment Program (P25 CAP)
- Codan Communications P25 Systems Training Guide
Phase 1 vs Phase 2
- FDMA - Frequency Division Multiple Access - Original phase 2 application of splitting a 12.5 kHz frequency into 2 6.25 kHz slots
- TDMA - Time Division Multiple Access (Note: DMR is also TDMA) Splitting a 12.5kHz frequency into 2 faster data rates to create 2 "slots"
- C4FM - Continuous 4 level FM modulation—a special type of 4FSK modulation—for digital transmissions at 4,800 baud and 2 bits per symbol
- CQPSK - Compatible quadrature phase shift keying (C4FM receivers can demodulate)
Phase 1
- 12.5 kHz digital mode, single user per channel access, using C4FM
- Many talkgroups may use Dynamic Dual Mode, which allows the talkgroup to automatically switch to TDMA (Phase II) when only TDMA-capable subscriber radios are active on the talkgroup, but will revert to Phase I when older radios (not P2 capable) are active on the talkgroup. As a result, many talkgroups in "D" Mode (Phase I) may intermittently become T (TDMA, Phase II) and only be monitored on a Phase II capable scanner at any time.
Phase 2
- The P25 Phase 2 Standards are based on a two-slot TDMA channel access method within 12.5 kHz channel bandwidth and is used for P25 trunking systems. P25 Phase 2 two-slot TDMA trunking is an
addition to the P25 Standard and does not replace P25 Phase 1 FDMA. The P25 two-slot TDMA for Phase 2 doubles the spectrum efficiency of Phase 1 (12.5 kHz).
- The P25 Phase 2 TDMA CAI uses two different modulation schemes for over-the-air transmission of the 12 kbps data stream, Harmonized Continuous Phase Modulation (H-CPM), is a common constant-
envelope non-linear modulation and is transmitted by the subscriber equipment. Harmonized Differential Quadrature Phase Shift Keyed modulation (H-DQPSK), is a non-coherent modulation scheme and is transmitted by the fixed site equipment.
- A P25 Phase 2 FDMA solution was finalized (CQPSK), but never widely used
(information above by Coden***) See Page 96 for pictorial
Phase 2 Control Channels
- Some of the newest Phase 2 trunk system have a Phase 2 control channel, meaning that the other slot can be used for a voice slot. Most Phase 2 and all phase 1 systems, the control channel information takes up the whole bandwidth/rate of the frequency.
- The P25 Phase 2 trunking system uses an FDMA Phase 1 Control Channel (with TDMA extensions / advanced signaling) for all registration, channel access and other system control. Two-slot TDMA channels are used for voice traffic channels, and FDMA channels are used for data traffic channels. The Phase 2 subscribers request a voice traffic channel by communicating with the TRC on the control channel using advanced signaling (over Phase 1) to identify the TDMA time slots.
- A P25 Phase 2 two-slot TDMA fixed site trunking system and subscribers will support the Phase 1 CAI. This facilitates interoperability among multiple manufacturers’ equipment, migration planning from Phase 1 FDMA to Phase 2 two-slot TDMA, and inter-system roaming, according to network operator requirements
P1 vs P2
- P2 radios can revert to P1 as needed, by P1 radios can NOT access P2
- P1 is used by most(?) conventional, is used by trunking. P2 is usually only used in trunking applications
- Any manufacturer of P25 should be backwards compatible and offer interoperability with other P25 vendors
- NEW INFO
Phase 1 - radio systems operate in 12.5 KHz analog, digital or mixed mode. Phase 1 radios use Continuous 4 level FM (C4FM) non-linear modulation for digital transmissions. Phase 1 P25 compliant systems are backward compatible and interoperable with legacy systems, across system boundaries, and regardless of system infrastructure. In addition, the P25 suite of standards provides an open interface to the RF subsystem to facilitate interlinking of different vendors’ systems. Phase 2 - radio systems will achieve one voice channel or a minimum 4800 bps data channel per 6.25 kHz bandwidth efficiency. The P25 Phase 2 FDMA solution is finalized (CQPSK), and an alternate TDMA solution is currently under development. Phase 2 implementation achieves the goal of improved spectrum utilization. Also being stressed are such features as interoperability with legacy equipment, interfacing between repeaters and other sub-systems, roaming capacity and spectral efficiency/channel re-use. Phase 3 - Implementation of Phase 3 will address the need for high-speed data for public-safety use. Activities will encompass the operation and functionality of a new aeronautical and terrestrial wireless digital wideband/broadband public safety radio standard that can be used to transmit and receive voice, video and high-speed data in wide area, multiple-agency networks. The European Telecommunications Standards are working collaboratively on Phase 3, known as Project MESA (Mobility for Emergency and Safety Applications). Current P25 systems and future Project MESA technology will share many compatibility requirements and functionalities
NAC
- NAC is the Network Access Code, somewhat similar to PL tones or DPL tones used on analog (4096 codes available to use) (range of $000 to $FFF)
- Unlike most other applications, NAC is referred to by the HEX (hexadecimal) number. These will either be shown with "NAC" or preceded by a dollar sign ($)
- Used on conventional simplex, repeaters and simulcast systems.
- Used on trunked systems. Usually each site is assigned a "unique"* NAC (however it can be reused in the system elsewhere) [Each frequency on the site will use the same NAC]
- Note: No need to say "NAC code" and "NAC tone" is not appropriate.
Optional NAC
- $293 - Default code used by manufacturers, many interop channels
- $F7E - A receiver will pass through ANY NAC received (but the transmitter will use it's programmed NAC)
- $F7F - A receiver will pass through ANY NAC received and the repeater will transmit THAT NAC
P25 Data
- Data can be streamed......
P25 Conventional
Simulcast Repeaters (Conventional)
P25 Conventional Talkgroups (P1)
- Most conventional P25 systems are using a talkgroup, along with the NAC. Some systems have even have more than 1 talkgroup, but, for example, talkgroup 1 may have priority over the other talkgroups.
- 1, 2, 3 (Routine Group Call) (1 is the default on Motorola systems)
- 4095 Motorola DIU (Digital Interface Unit), often a phone patch
- 65535 (Routine Group Call) (usually the default on other vendor systems)
- Unit-to-Unit / Individual Call (will show the RIDs of each radio as the talkgroup)
- Programming You may need to program your scanner as a "P25 One Freq" to receive talkgroups. You'll need to use "P25 One Freq" to add and assign RIDs aliases.
Unit ID (UIDs) / Radio IDs (RID)
- Used on both Conventional and Trunked. Some trunked radios can assign a separate RID for each P25 trunked system that they can access
Specific Functions
- $000000 -- No-one. This value is never assigned to a radio unit
- $000001 to $98967F for general use.
- $989680 to $FFFFFE for talk group use or other special purposes.
- $FFFFFF -- Designates everyone. Used when implementing a group call with a TGID
P25 Options
P25 Encryption
- User selectable or strapped (can not turn off). Also see Michigan MPSCS Encryption Recommendations and Best Practices Idaho Encryption Guidance (PDF) FPIC Encryption documents Cybersecurity & Infrastructure Security Agency (CISA) documents
There are three different states for encryption: • Clear is used when there is no encryption on the talkgroup and the encryption cannot be turned on. • Selectable can be used to turn encryption on or off using a switch or button or other radio feature selectable setting. • Strapped (Secure) is used when the talkgroup is always encrypted and cannot be turned off.
- Encryption Key
- Applies to both trunking and conventional systems, as well as voice messages and data packets. The IMBE™ vocoder produces a digital bit stream for voice messages that is relatively easy to encrypt. Major advantages of the P25 encryption design are that encryption does not affect speech intelligibility nor does it affect the system’s usable range. Both of these advantages are major improvements over encryption previously used in analog systems.
- Encryption requires that both the transmitting and the receiving devices have an encryption key, and this key must be the same in each unit. This may be done using a Key Loader. Most P25 subscriber equipment is optionally available with the capability of storing and using multiple keys. That is, a unit could use one key for one group of users and use a separate key for another group of users. System management of keys may be done in a Key Management Facility, or KMF.
- The traffic channels of a trunked system can be encrypted in the same manner as a conventional system encrypted system, using the Algorithm ID, Key ID and Message Indicator for encryption variables. The control channel of a trunked system may also be optionally encrypted. In a TSBK message, the Opcode and Arguments may be encrypted and the Protected trunking block flag (P) is set to indicate encryption. In an MBT message, the Logical Link ID, (and in the alternate header format, the Opcode and Octets 8 and 9) as well as all Data (except the CRC) may be encrypted, and the SAP Identifier is set to indicate encryption.
- Types of P25 Encryption
- In the U.S. there are four general “types” of encryption algorithms. Type 1 is for U.S classified material (national security), Type 2 is for general U.S federal interagency security, Type 3 is interoperable interagency security between U.S. Federal, State and Local agencies, and Type 4 is for proprietary solutions (exportable as determined by each vendor and the U.S. State Department). The CAI supports use of any of the four types of encryption algorithms. P25 documents currently standardize two different Type 3 encryption processes. One encryption process is the U.S. Data Encryption Standard, or DES algorithm, which uses 64 bit Output Feed Back and is denoted as DES-OFB. Another encryption process is the Advanced Encryption Standard (AES) which is a 256 bit algorithm.
- P25 also includes a standardized Over The Air Rekeying (OTAR) function. OTAR is a way to greatly increase the utility of encryption systems by allowing transfer of encryption keys via radio. This remote rekey ability, controlled from a Key Management Facility, or KMF, means that radios no longer have to be physically touched in order to install a new or replacement key into a radio. OTAR signaling is sent as Packet Data Units over the Common Air Interface.
- Optionally, multiple encryption keys can be stored in P25 radio equipment. In order to identify the keys, they are stored with an associated label called a Key Identifier or KID. The type of algorithm to be used with the key is identified by an Algorithm ID or ALGID.
- Types of Encryption Algorithms
• ADP (Advanced Digital Privacy)/ARC4 Low security encryption. Usually loaded in template but can be loaded with keyloader. • DES-OFB (Digital Encryption Standard Output Feed Back) Medium security encryption that is usually loaded with keyloader but can be loaded with software. • AES256 (Advanced Encryption Standard) High security (Federal Grade) encryption that can be loaded with keyloader or software (in some radios).
P25 Emergency Switch
- The Emergency switch will allow the user to assert the emergency condition. Once asserted, the emergency condition remains active until cleared by some other means (eg. turning the radio off)
- EBT - Emergency Button
- May be on a separate talkgroup
P25 Conventional Control Messages
- Emergency Alarm is activated by a user to inform the dispatcher an emergency situation is encountered. The Emergency Alarm is typically used in a life threatening situation.
- Call Alert sends a data packet to the destination subscriber identifying the source of the Call Alert and requesting the destination to contact the source. Call Alert is typically used if the destination subscriber
did not respond to a voice message from the source.
- Radio Check is used to determine if a specific subscriber is currently available on the radio system. A response to the Radio Check is required, or the system will assume the subscriber is not available
- Radio Inhibit (Radio Uninhibit) is used to deny all calls between the inhibited subscriber and the RFSS. Radio Uninhibit cancels the inhibit status of the subscriber
- Status Update is used by a subscriber to indicate its current status (user and unit status) to a designated target address. Status Request is used by a subscriber to request the current status of a specified subscriber.
- Message May be sent by a subscriber or the RFSS to send a short message to another subscriber.
- Telephone Interconnect Dialing will allow a subscriber to initiate a Unit to PSTN call, and will allow a telephone network to initiate PSTN to Group and PSTN to Unit calls.
- Radio Unit Monitor is used to cause a subscriber radio to key up when requested to do so by a dispatcher. Allows a dispatcher to listen to activity at the location of the subscriber.
P25 Location Services
- Location Services, such as GPS, provide a method of supplying a Location Service Host System (mapping software for example) with the location of subscriber units within a P25 Radio System coverage area. The Location Services can include information such as latitude, longitude, altitude, Coordinated Universal Time (UTC), GPS quality, and many other location information messages. The P25 standards break the location services into two tiers of service, Tier 1 and Tier 2.
- Tier 1 is a simple subscriber to subscriber interface for Conventional direct (talkaround) or repeated radio signals, without providing IP addressing, fixed host routing, or more advanced configuration of triggering and reporting.
- Tier 2 is a request/response protocol that allows an LSHS to make a request for location information from a subscriber unit or Mobile Data Peripheral (MDP), and to receive a response from the subscriber
immediately, periodically or under various triggering conditions. The information can be transmitted between subscribers in Conventional direct (talkaround) or repeated mode, or between a subscriber and a Fixed Data Host (FDH) in Conventional or Trunked Fixed Data mode. Tier 2 is used where there is the necessary infrastructure to allow routing and transport in a customer data network using IPv4. The Tier 2 approach utilizes Location Request/Response Protocol (LRRP) across the P25 Packet Data Service to transport UDP/IP addressed location information packets from the LSHS to the subscriber, and to transport location information from the subscriber to the LSHS. LRRP is an XML-based protocol, and uses Efficient XML Interchange (EXI) compression for efficient transmission over the Common Air Interface
P25 Over The Air Rekeying (OTAR)
- OTAR is the ability to rekey the radio over the system without the use of a keyloader. This provides the ability to issue a new key quickly and without the possibility of missing radios or having older keys that
don't work. This should be used to eliminate the possibility of a lost or stolen key or if constant key updates are needed for secure communication.
- (encryption) P25 also includes a standardized Over The Air Rekeying (OTAR) function. OTAR is a way to greatly increase the utility of encryption systems by allowing transfer of encryption keys via radio. This remote rekey ability, controlled from a Key Management Facility, or KMF, means that radios no longer have to be physically touched in order to install a new or replacement key into a radio. OTAR signaling is sent as Packet Data Units over the Common Air Interface.
P25 Trunking
- System/Network ID (NID) - $001 to $FFE
- WACN - $00001 to $FFFFE
- RFSS - $01 to $FE
- Site ID - $01 to $FE
- INTRODUCTION TO P2 5 T R U N K I N G
- In a conventional radio system, the operation of the system is controlled by the radio users, whereas in a trunked system the management of system operation, including call routing and channel allocation, is automatic. A trunking system is basically a group of communications channels automatically sharing among a large group of users. The users request access to the communication channels (also called traffic channels), and a trunking controller (also referred to as FNE – Fixed Network Equipment) grants access to the traffic channels. In a conventional system (non-trunked), the users control their own access to the traffic channels by direct selection of frequencies or channels.
- P25 trunking standards specify a control channel, and one or more traffic channels. The control channel can be a dedicated control channel, or optionally, a composite control channel. A dedicated control channel will operate as a control channel only, where a composite control channel can operate as a control channel or as a traffic channel when all other traffic channels are busy. A secondary control channel can also be specified, to be used when the primary control channel is unavailable.
- The P25 trunking standards and P25 digital conventional standards use identical modulation (C4FM), bit rate (9600 bps), voice messages (CAI), and control messages (data packets) for various features, including voice, data, status, message, or other features. The Common Air Interface for both trunking and conventional P25 digital systems is similar. The only difference is that the trunked version requires a command/response process to a trunking controller (on a control channel) using packet access techniques which coordinates the users’ access.
- IMPLICIT / EXPLICIT
- A P25 trunked system can be configured in either the implicit mode or the explicit mode of operation. In the implicit mode of operation, all radios are pre-programmed with the channel and frequency information. The radio then looks internally to the pre-programmed channels when switching between control and traffic channels. The explicit mode sends the channel and transmit or receive frequency over the air to the radio. The implicit mode of operation typically uses single block messages, where the explicit mode typically uses multi block messages
- Registration
The subscriber unit (mobile or portable radio unit) registers with the network whenever the subscriber is turned on or moves into a new zone. Registration ensures that only authorized users access the network, and that the network can track where the subscriber is located
Trunking Talkgroups (Working Group ID/WGID)
- TGID (talkgroup ID) ranges from hexadecimal $0000 to $FFFF and contains 65,536 addresses. These are usually referred to in DECIMAL in the scanning community
- $FFFF == All call group
- Announcement Group Call
- Unit-to-PSTN
- Unit-to-Unit
*************************************************###############################
The following TGID’s have specific functions:
- $0000 -- No-one or a talkgroup with no users. Used when implementing an individual call.
- $0001 -- Default TGID value and should be used in systems where no other talkgroups are defined.
- $0001 thru $FFFE - Assignable working group
- $FFFF -- Reserved as a talkgroup which includes everyone
The three main types of voice message calls are:
- Routine Group Call This is the most common type of call and is intended for a group of users within the radio system. This type of call is typically initiated by asserting the PTT switch.
- Emergency Group Call This type of call is similar to a Routine Group Call, but is used during an emergency condition. An emergency condition is defined by the radio system users This type of call is typically initiated by asserting the Emergency switch.
- Individual Call -- As addressed to a specific individual. The caller enters the subscribers Unit ID, that they wish to call, and this is used as the Destination ID by the radio making the call. This type of call is made after the Destination ID is entered into the radio
Analog vs. P25
- Transition - P25 equipment can be used in any configuration that is typically found in existing analog systems. Base Stations, remote bases, repeaters, voting, and simulcast systems are all configurations of P25 conventional systems. Transmitter RF power output levels and receiver sensitivity levels of P25 equipment are very similar to those of conventional analog equipment. P25 equipment can therefore be used in a “one-for-one replacement” scenario of analog equipment.
- ANALOG VS. P25 DIGITAL COVERAGE
- There is much discussion about the RF coverage area of an analog radio signal versus a digital radio signal. In theory, a P25 digital radio signal will allow for a slightly greater coverage area when placed in the same location as an analog radio. There are some factors, however, that may interfere with the digital signal to a greater degree than the interference to an analog signal.
- P25 Phase 1 uses C4FM modulation. Because C4FM is a constant amplitude modulation, it allows use of nonlinear power amplifiers. Use of nonlinear amplifiers results in digital equipment that produces RF power levels that are equal to the power levels of current analog equipment. Systems can be implemented with little or no loss of coverage. An analog transmitter can be replaced with a P25 Phase 1, digital transmitter that produces the same transmitter output level of the analog transmitter. This is currently not necessarily true for higher power analog systems that are replaced by some TDMA systems when bandwidth of the resultant signal is a critical issue
- See more on page 49 at Codan Training Guide
P25 Failsoft
- In P25 trunking applications, P25 Failsoft allows a dispatcher to continue voice communication during degraded P25 system operation.
- When a site fails, designated repeaters enter the Failsoft state which allows the console and affected radios to continue communicating using Failsoft channels in conventional mode. Failsoft operation supports Conventional Group Calls, PTT ID/ANI Alias, Emergency Calls/State, Late Entry, Call Alert, and Console-Controlled Encryption.
P25 Trunked on VHF
Missouri Statewide Wireless Interoperable Network (MOSWIN)
- For Example,, in Missouri P25 PDF
- Uses Federal Government frequencies for this project, Devices must operate throughout the 138-174 MHz VHF High band (see the link above for more system requirements)
- Device must be capable of Advanced Project 25 Control Channel functionality that enables explicit trunking. Due to the lack of standardized channel pairings in the public safety VHF High Band spectrum allocation, higher tier P 25 control channel functionality is required in subscriber devices on the MOSWIN network for it to be able to explicitly trunk and specifically assign unique, site based VHF channel pairings to a subscriber radio based on channels available, thereby enabling the subscriber to access the network.
- This specific method of granting a channel is a more extensive process for the network’s Control Channel than in implicit trunking, where the channel pairings are standardized and a reduced amount of messaging on the Control Channel dedicated to channel granting is required for each channel assignment. In addition to the above criteria, subscriber units proposed for use on MOSWIN need to be tested on the MOSWIN network to ensure consistent operation. Experience in other states, using both VHF High Band and 700/800 MHz Wide Area trunked systems, indicates that field testing of subscriber units prior to system certification is necessary to ensure that the full functionality of the subscriber is achievable and expectations of the users are verified. Those field tests include roaming throughout a system to ensure the subscriber transfers across all the zones of a system and we look forward to working with the vendor community on developing those tests.
- The Missouri Department of Public Safety anticipates developing a certification process in which subscriber units from multiple manufacturers can be approved to operate on MOSWIN. Any additional questions on the MOSWIN Project 25 requirements listed above, contact Stephen Devine at 573-522-2382 stephen.devine@dps.mo.gov
P25 IntelliRepeater (Trunking)
- GTR-8000 Turnkey ASTRO 25 RF Site
An IntelliRepeater is a trunked repeater with built-in capabilities to perform the trunking functions without the need for a site controller. Any IntelliRepeater at a site can provide this capability if a station was to fail. This eliminates the need for central controllers at every site, while still providing full system capabilities.
Other Digital Standards
TETRA
- A number of European countries submitted TETRA to ITU-R Working Party 8A on behalf of ETSI (the European Telecommunication Standards Institute). TETRA’s primary mode uses /4DQPSK modulation that requires a linear or linearized amplifier and fits four-slot TDMA within a 25 kHz channel mask.
IDEN/DIMRS
- Canada submitted DIMRS to ITU-R Working Party 8A. It is a six-slot TDMA system using 16QAM modulation that fits within a 25 kHz channel mask. It is designed primarily for public systems and is in use in a number of countries around the world. Motorola Inc. is the principal manufacturer of this equipment, under the name IDEN™
Cellular Networks
FirstNet
- Public Safety Nationwide Coverage
NexTel
- History
Early Mobile Phones
- 800 MHz/Scanners
- Banning of devices that can monitor cellular communications
SEARCHING FOR FCC LICENSES
- Legacy GENMEN database Call Sign By Licensee
- By Site / Market / Frequency
- Advanced License Search
- Geographic License Search (use coordinates, county/state, address, frequency)
- FCC Advanced Application Search
- FCC Archive License Search
- FCC ASR Registration Search
- Ham (Amateur) Radio Call Sign database
- CP/Paging Licenses cover a spectrum or frequency range, auctioned off by the FCC in blocks. (Note: These licenses DO NOT show up in the RadioReference FCC Database
- You can search some of these databases, by just name, or by LICENSEE city, by state or using coordinates (latitude longitude)
- Converting coordinates - Degrees Minutes Seconds to/from Decimal Degrees https://www.fcc.gov/media/radio/dms-decimal
- See also: FCC Field Offices
- Federal Government frequencies are NOT available for searching. NTIA
National Telecommunications and Information Administration https://www.ntia.gov/page/united-states-frequency-allocation-chart https://www.ntia.doc.gov/files/ntia/publications/redbook/2012-05/7_12.pdf https://www.gao.gov/assets/gao-22-105221.pdf
Searching for Mass Media / TV & Radio Stations
- FCC Mass Media database AM Query FM Query
- Broadcast Radio Links
Air / Military Air (MilAir)
- FCC Aircraft Search
- Airnav.com North American Airports/Frequencies
- Federal Aviation Administration
- Transport Security Administration
- [Silent AM and FM Broadcast Stations https://www.fcc.gov/media/radio/silent-radio-lists]
FREQUENCIES
BY CHART/LIST by Category
UNKNOWN FREQUENCY USAGE
- How to search. RR, FCC, etc.
- Antennas on a vehicle or at a building/tower site https://forums.radioreference.com/threads/identifying-unused-antennas-at-tower-site.467317/
(Radio) Towers/Transmitter Sites in your areas
- Try this to locate towers in your locale.
- Antenna Structure Registration (ASRN) Records Within A Radius
- AntennaSearch.com Search for Cell Towers and Antennas
- Cellular Tower Locater/Mapper
- TowerMaps.com
My History of Scanning
Former ScanIllinois.com website (hosted by unknown user on Angelfire hosting
- Notes
- I DO NOT monitor Aircraft or MilAir. I have made attempts on monitoring Railroads, but can never find interesting to keep me listening.
Nothing about the actual air frequencies that I enjoy either. Local UHF systems/repeaters on an airport are productive listening.
Conventional Uses
- Simplex mobile/portables
- Simplex Base/Mobile
- Repeater
- P25 on above
- DMR on above (MOTOTRBO)
- NXDN on above (NEXEDGE)
- Using "ONE FREQ DMR" or "ONE FREQ NXDN" or "ONE FREQ P25" on capable Uniden scanners
Monitoring DMR or NXDN on Radio Shack/GRE scanners
- These scanners are NOT capable of scanning a system, but is able to pick up the voice transmissions
Let say this is a conventional DMR system in use near you:
462.0375 467.0375 WRCR799 RM CC 15|TG 2|SL 1 Lodge Ch 2 Operations (Ch 2) DMR Business 462.0375 467.0375 WRCR799 RM CC 15|TG 3|SL 1 Lodge Ch 3 Operations (Ch 3) DMR Business 462.0375 467.0375 WRCR799 RM CC 15|TG 4|SL 1 Lodge Ch 4 Operations (Ch 4) DMR Business
- I would keep an eye on the slots. It's very possible that the talkgroups can be used on either slot.
- For example Ch. 4 has traffic, which is on SLOT 1, then Ch.2 wants to talk at the same time, ...It will go on SLOT 2, while SLOT 1 is still carrying the traffic on Ch 4. Ch 4 could stop for a second and Ch 2 could switch to SLOT 1. While Ch. 2 is on SL1, Ch. 4 starts back up again and will use SL2 (if they both are still carrying traffic)
Trunked Systems
- Motorola Type II (Legacy)
- EDACS (Legacy)
- LTR (Legacy)
- APCO P25 Digital Phase I (+ Simulcast)
- APCO P25 Digital Phase II (+ Simulcast)
- DMR Type I - Conventional Digital Mobile Radio (non licensed conventional, ie) MOVE????
- DMR Type II (Licensed conventional) MOVE????
- Internet Protocol Site Connect (DMR)
- DMR Type III Hytera (Trunking)
- DMR Type III Other (ie. Capacity Max) Trunking
- DMR Capacity Plus (Cap+)
- DMR Linked Capacity Plus - trunked multi-site multi-channel configuration of MotoTRBO which combines both Capacity Plus and IP Site Connect configurations.
- DMR Capacity Max
- DMR Connect Plus (Con+)
Channel Spacing
- Emissions below "fit" into the available channel spacing
- Radio/TV
- The smaller the channel spacing, the more users that we can fit in a block of frequencies
- The wider the channel spacing, the better the reception and audio fidelity
- 25 KHz - Wideband
- 12.5 KHz - Narrowband* (1/2 of wide)
- 6.25 KHz - Ultra-Narrow (1/2 of narrowband)
RF Channel FDMA TDMA (2 Time Slot) can carry 2 voice channels (Conversations)
Emissions / Emission Designators
Common Emission Designators See SCAN-AID Emissions for full list
Common Emission Designators | |
---|---|
11K0F1E | Digital voice using frequency modulation without modulating sub-carrier. (11K0F1D Narrowband digital data, using frequency modulation without modulating sub-carrier) |
11K0F2E | Digital voice using frequency modulation with modulating sub-carrier. (11K0F2D digital data) |
11K0F3E | Narrowband analog voice, considered by the FCC to be identical to 11K2F3E. |
11K2F1D | POCSAG paging (narrowbanded, i.e., Swissphone alerting). |
11K2F1E | Digital voice frequency modulated without modulating sub-carrier. |
11K2F2D | Frequency modulated (FM) 2.5 kHz deviation audio frequency shift keying within a 12.5 kHz channel spacing. Commonly used for 1.2 kbps packet, FFSK station alerting, and AFSK outdoor warning siren signaling. |
11K2F2E | Digital voice frequency modulated with modulating sub-carrier. |
11K2F3D | Frequency modulated (FM) 2.5 kHz deviation DTMF or other audible, non-frequency shift signaling, such as Whelen outdoor warning sirens or “Knox-Box®” activation. |
11K2F3E | Frequency modulated (FM) 2.5 kHz deviation analog voice, "narrowband 12.5 kHz" (FMN mode in RadioReference.com Database) – may also be 11K0 and 11K3 bandwidth in the United States, may also be 10K1 or 12K5 bandwidth in Australia or Canada. |
13K1F9W | Harris OpenSky (SMR – 4 slot). |
13K6W7W | Motorola iDEN (900 MHz). |
14K0F1D | Motorola 3600 baud trunked control channel (NPSPAC). |
14K0F3E | EDACS Analog Voice (NPSPAC). |
15K4F9W | Harris OpenSky (SMR – 4 slot Data/Voice). |
16K0F2D * | 4 kHz deviation FM audio frequency shift keying (72 MHz fire alarm boxes). |
16K0F3D | Frequency modulated analog data |
16K0F3E * | Frequency modulated (FM) analog voice, 4 kHz deviation (NPSPAC); (FM mode in RadioReference.com Database). |
20K0F3D * | Frequency modulated (FM) 5 kHz deviation DTMF or other audible, non-frequency shift signaling, such as Whelen outdoor warning sirens or “Knox-Box®” activation. |
20K0F3E * | Frequency modulated (FM) analog voice, 5 kHz deviation; "wideband 25 kHz" (FM mode in RadioReference.com Database). |
20K0F9W | A "catch-all" designator originally intended for a number of simultaneous emissions, but has been misused as a single designator to indicate multiple types of operation. |
4K00F1E | 6.25 kHz voice NXDN (Narrow IDAS, NEXEDGE). (4K00F1D 6.25 kHz data) |
4K00F1W | 6.25 kHz voice and data NXDN (Narrow IDAS, NEXEDGE) frequency modulated without modulating sub-carrier. (4K00F2W with subcarrier) |
4K00F2D | 6.25 kHz analog CW ID NXDN (Narrow IDAS, NEXEDGE). |
6K00F1D | SCADA Carrier Frequency Shift Keying. (6K00F2D SCADA Audio Frequency Shift Keying.) (6K00F3D SCADA Analog data that is not AFSK (variable tone, DTMF, etc.).) |
7K30F1E | Futurecom “MOBEXCOM” DVRS (mobile repeater) voice (P25 waveform, slightly narrower occupied bandwidth). (7K30F1D data) |
7K60F1E | 2-slot DMR (Motorola MOTOTRBO) TDMA voice. (7K60F1D Data) (7K60F1W Data and voice) 7K60FXE (7K60FXD Data) (7K60FXW Data and voice) |
2-slot DMR (Motorola MOTOTRBO) TDMA voice. | |
8K00F1D | P25 Phase I C4FM data. |
8K00F2D | Frequency Modulated digital data with modulating sub-carrier. |
8K10F1D | P25 Phase I C4FM data. |
8K10F1E | P25 Phase I C4FM voice (P25 mode in RadioReference.com Database). |
8K10F1W | P25 Phase II subscriber units (Harmonized Continuous Phase Modulation – H-CPM). |
8K30F1E | 12.5 kHz voice NXDN (Wide IDAS, NEXEDGE). (8K30F1D 12.5 kHz data) |
8K30F1W | P25 Phase I C4FM hybridized voice and data applications (most commonly seen on trunked licenses). |
8K30F7W | NXDN 12.5 kHz digital voice and data (Wide IDAS, NEXEDGE). |
8K40F1E | P25 Phase I (4 Level C4FM Voice). ( 8K40F1D 4 Level C4FM Data) |
8K50F9W | Harris OpenSky (2 slot narrowband). (8K40F9W NPSPAC – 4 slot Data/Voice) |
8K70D1W | P25 Linear Simulcast Modulation ASTRO (9.6 kbps in 12.5 kHz channel spacing). |
9K30F1D | SCADA/ EOD Robot Remote Control. |
9K36F7W | Yaesu System Fusion C4FM (Voice Wide * Voice Narrow + Data * Data Wide). |
9K70F1E | P25 Linear Simulcast Modulation “WCQPSK” voice (per Harris MASTR-V literature). (9K70F1D data) |
9K80D7W | P25 Phase II fixed-end 2-slot TDMA (Harmonized Differential Quadrature Phase Shift Keyed modulation – H-DQPSK), per Motorola literature. |
9K80F1D | P25 Phase II fixed-end 2-slot TDMA H-DQPSK data, per Harris MASTR-V literature. |
- When used between 136 – 470 MHz in Part 90 use, this technology is not compliant with 2013 narrowbanding requirements and must be discontinued by January 1, 2013. As of January 1, 2011, this emission may no longer be applied for between 136 – 470 MHz in Part 90 use, unless the applicant certifies that the station equipment meets the narrowband efficiency standard, or the licensee has been granted a waiver of the January 1, 2013 deadline for that station.
VHF Low Band has not been required to narrowband. A 20K0 emission bandwidth continues to be acceptable for nearly all uses.
Encryption
- May be called "crypto" for short. CAN NOT and WILL NEVER will be available to listen to on a scanner/receiver.
- Encrypted frequencies or talkgroups CAN NOT be monitored with-out permission of the agency. That agency may issue a Encryption Key for use in a two-way radio or Unication Pager to be able to monitor.
- Types of Encryption:
- Motorola radios require a MACE module and software upgrades
Mobile Extender/Vehicular Repeater/DVRS
- Increase the range of your portable radio, using your nearby mobile radio to reach out to a repeater, etc.
- Article on VR and the 700 MHz Band
- Article on 'SAR Teams Gain with VR
- [https://static1.1.sqspcdn.com/static/f/1281716/17209685/1332195037453/Public+Safety+Reports.pdf 800 MHz VR Licensing
- Air Force using VR at most sensitive remote bases ND, WY, MT, TX
Pyramid Communications
- The "original" vehicular repeater system. Made in the United States.
- All VRs work on a simplex channel. Can work IN-BAND with filtering options.
- VHF In-Band requires both the BPF-1604 Band Pass Filter and VHF Notch Filter. SVR Simplex MUST be 2 MHz or 5 MHz, or greater from all mobile frequencies (both TX and RX). The Notch filter is made in the 2MHz and 5MHz, with obviously the 2 MHz costing more. NOTE: This doesn't just mean the main channel you use, but ANY channel that may may need to use on the VR.
- (integrate above) BRF-1601 Notch Filter for as close as 5 MHz separation between mobile TX/RX and SVR-200. Use the narrower BRF-1602 Notch Filter for frequencies as close as 2 MHz separation
- VHF In-Band repeating is the most popular method of deployment, per Pyramid. Be aware, the 173 MHz MO3 frequencies are already crowded, at least with licenses in many areas. Much of this being used as constant data transmissions for water or waste-water monitoring systems.
- Pyramid (spent 5 years) worked to secure new MO3 channels on 173.2375, 173.2625, 173.2875, 173.3125, 173.3375, 173.3625. These are SHARED with telemetry users (as stated above). Recommended to work with EWA for licensing of these frequencies, as they helped. APCO or any Public Safety coordinator "Should" be able to help though.
- UHF In-band DOES NOT require the use of a Band Pass Filter (, only the Notch Filter. The Notch Filter must be 5 or 10 MHz away from ALL mobile frequencies (both TX and RX).
- Multi-Band Radios and In-Band - New TPLX-V-U-M 100W VHF, UHF, 7/800 MHz Triplexer, works with Kenwood and Viking..... Harris Unity or APX-8500 mobiles only have one antenna connection for all bands.
- Multi-Vehicle Priority: One unit on a scene will provide priority traffic, without interference from other VRs. MO3 2W Maximum Power
- Pyramid Digital Vehicular Repeater Webinar (YouTube)
- Bandpass Filter: The BPF-1604 is a high selectivity pre-selector filter that prevents the mobile’s transmitter from overloading the SVR-200VB receiver’s front end. The filter is tuned to the SVR-200’s simplex frequency and rejects everything except a narrow band of frequencies centered around the SVR-200 frequency.
- Notch Filter: Transmitters are designed to broadcast on a specific frequency, but no matter how good the design of that transmitter, it produces RF energy across a broad band of frequencies. The FCC sets limits on how much “off-frequency” energy a transmitter can produce, but even within the limits, it may be enough to cause interference in a receiver located close by, such as the SVR-200. No amount of bandpass filtering on the SVR-200 will reduce this interference since it is right on the SVR-200 receive frequency. The BRF-1601 or BRF-1602 notch filter is tuned to the SVR-200’s receive frequency but installed on the mobile’s antenna cable. The notch filter further attenuates the noise produced by the mobile that occurs on the SVR-200 receive frequency. This is also why frequency spacing is so critical. None of the mobile’s frequencies, transmit or receive, can be within 5 MHz using the BRF-1601 or 2 MHz using the BRF-1602. If a mobile transmit frequency is too close, the filter will consume too much of the transmitter power, damaging the filter and possibly the transmitter. If a receive frequency is too close, the mobile’s receiver sensitivity will be degraded.
SVR-200
SVR-250
SVR-252
SVR-P250
- for P25
SVR-P255 EVRS Enhanced Vehicular Repeater Solutions (Aug 2017) for Kenwood Viking P25 Trunking Systems, (like VM-900)
- P25 Smart Trunking Protocol, acts just like you were talking directly to the P25 trunking system. Simulates Trunking, still an MO3 License.
SVR-300 DMR
- Full Tier 2 DMR modulation to the portable radio, on a simplex talk-around channel using 1 Time-Slot. Encryption available.
- Mobile Radio can interface to Tier 2 or 3, Capacity Plus, Connect Plus, Max, Tier 3, IP Site Connect, etc.
- Interface cables for most popular DMR mobile radios
- Previous analog VRs DO WORK on DMR, but this is an upgrade from that.
- VHF, UHF, 700/800 MHz
- Uses Group IDs (GIDs)
SVR-300 NXDN
- NEXEDGE/iDAS. USB-D programming 6.25 or 12.5 MHz
- Uses RAN codes for priority signaling
Vehicular Repeaters / Mobile Extenders
- VRX1000 Vehicle Radio Extender provides federal agencies, state patrol and public safety first responders the ability to communicate on their portable radios in a mobile-only coverage area. Equipped with cross-band and in-band performance, and available in 700/800 MHz VHF and UHF frequencies, the VRX 1000 is compatible with P25 APX 7500, APX6500 and APX 4500 mobile radios.
- See Pyramid Communications
DVRS (Digital Vehicular Repeater System)
- In-Building etc.
- See Futurecom DVRS Explainer Video (on YouTube, by Futurecom Systems)
- Owned by Motorola Solutions as of Oct 2022 LINK For over 30 years, Motorola Solutions and Futurecom have collaborated on RF repeaters and extenders that are tightly integrated with Motorola Solutions’ radio networks and devices. These solutions help to ensure that first responders, even in remote locations, maintain critical communications and advanced features, such as encryption and data services, to do their jobs more safely and securely. FUTURECOM HAS A GREAT SELECTION OF VIDEOS ON YT: (LIST HERE) that explain how they work. Neat! for Fire Departments
- DVRS in Subway Tunnels, etc.]
- Example - Illinois State Police are using VHF P25 DVRS to extend their 700/800 MHz STARCOM21 mobile radios, etc. This CONVENTIONAL P25 system still passes through the P25 NAC, Site ID, RFSS, RID/UIDs, Talkgroup numbers. On a Uniden scanner it looks just like you are on the P25 Trunked System voice channel.
- PSU - Portable Subscriber Unit
- Can repeater to Conventional or Trunked. Multiple units on-scene can use the same DVRS.
- DVRS available through DataTronics, Alton IL
Motorola PDR8000 Portable Digital Repeater
PDR8000 [https://www.datatronicscom.com/downloads/motorola/motorola-pdr80000-datasheet.pdf Datasheet (PDF)
VRX1000
- Works with Motorola APX series mobile radios. 3 watt Simplex. LINK Datasheet (PDF)
Temporary Repeaters
- SOW Site on Wheels, COW
- Field/Incident Repeater (see youtube Jim G Field Incident Repeater/Portable Booster
Paging / Data
Two-Tone Paging
- Paging/Decoding/Alerting (See Unication and other scanners with available "Fire Tone-out")
- Unication
- True Two-tone paging is only on analog, On P25 trunked, the sounds are simulated as an alert, but the paging info is sent digitally in the transmission.
Store and Forward
- May be called "Store Forward"
- Midian Electronics PR-19i
Simplex Repeater Mode: The PR-10i can be connected to a simplex mobile or base station to create a simplex store and forward repeater. When the PR-10i sees a busy indication from the connected radio it will start recording the received audio. When the busy indication goes away for a programmed amount of time, the PR-10i will key the radio and retransmit the recorded audio. The following are applications for the PR-10i as a simplex repeater:
- Expand radio coverage into remote locations, tunnels, buildings (hospitals, campuses, etc), downtown areas and more. - Evaluate potential radio site or coverage problems by connecting the PR-10i to a mobile radio. A technician can then drive through the desired coverage area, key up and transmit voice, unkey and listen to the repeated audio quality.
Selective Repeat Mode: The PR-10i has an integrated decoder that can be programmed to decode 2-Tone, with an option for DTMF, 5-Tone or Pulse Tone (1500 Hz or 2805 Hz for HEAR Systems). When the tone decoder decodes the programmed sequence(s) it will give a validate output to the PR-10. The validate confirms that the PR-10i should repeat the incoming audio. The tones will also be regenerated. The following are applications for the PR-10i as a selective simplex repeater:
- Regenerate 2-tone or DTMF (optional) pages for fire departments into remote areas or buildings with poor coverage. - Regenerate Pulse Tone (optional) pages from ambulances in remote areas with poor coverage to hospitals (HEAR Systems).
Announcement Mode: The PR-10i can be programmed to repeat the last received audio message continuously at programmable intervals, applications include:
- Broadcasts for road or weather conditions - Aviation authority broadcasts for pilot information (ATIS � Automatic Terminal Information Service)
POCSAG
- Post Office Code Standardization Advisory Group, also known as Radio-paging code No. 1 Wikipedia (with Frequency List) Sigid Wiki info
- Numeric and Text Pagers often used by Hospitals/Medical facilities and more (Much less use with the popularity of cellular phones/networks)
- VHF (152/157-158 MHz), UHF (454/459 MHz) and probably rare use: VHF low band (35/43 MHz) 72-76 MHz
- 27 MHz CB band, with high power on 27.255 (CB Ch. 23), 4W limit on other frequencies.
- NEEDS NOTATION: 30.56-49.58 MHz, 150.775-162.000 MHz VHF bands and the 450-470 MHz band (plus 421-430 or 470-512 MHz in certain cities)
- HFunderground Frequency list
Super-POCSAG
- 1200 or 2400 BPS, has replaced most former POCSAG systems
- Decoding OpenPoc https://sourceforge.net/projects/openpoc/
Companies
- Unication
- Motorola
- Spok (used at 2200+ hospitals) (Largest paging network in the US)
- Critico Solutions (UK/Ireland)
Analog Data Transmissions (Non-DMR/NXDN/P25)
(used in monitoring water pressure/pumps,
- SCADA -
- Telemetry -
- Paging
- POGSAC
- CW-ID (Morse Code)
- DTMF - Dual Done Multi-Frequency DTMF Definition (by Techtarget)
- Can be used to activate a phone patch or other repeater options, can be used to active outdoor warning sirens (weather), can be used by some older style radios as a "tail" at the end of the transmission, denoting the radio's ID number.
- DTMF Data Tail (at end of a voice transmission)
- End-of-Train (EOT)
- Robots
- 1 Tone Paging
- 2 Tone Paging
- 1 Tone Paging
- DMR also offers advanced data communications such as SCADA, Telemetry
- NXDN
REPEATERS
- Conventional. For Trunking, see
![]() |
- A repeater added to the system allows radios to send their communications via a central point which repeats the message to the rest of the system. By installing a repeater high up (often on top of a building) the calls to the repeater are less affected by the obstructions. It also allows radios located far away from the repeater in opposite directions to communicate with each other, effectively increasing the range of the system.
![]() |
- Repeater stations can be connected together by either retransmitting received signals (parroting) or by sending received signals to other repeaters on the system via other methods (internet, unidirectional transmitter, etc). With these methods, the range of the system is only limited by the amount of infrastructure you install.
VOTERS / REMOTE LINKS
BDA/DAS In building Antennas
- In-building signal booster solutions typically include three key components: (from [1])
- A donor antenna that is mounted on the roof to seize the wireless signal from the outside.
- A Distributed Antenna System (DAS), which is a group of antennas placed throughout the structure to boost signal coverage.
- Bi-Directional Amplifiers (BDAs) that extend two-way radio coverage into difficult-to-reach areas, such as stairwells, underground hallways, tunnels, parking garages, and other challenging zones. (Depending on size, materials, and structural design, some buildings may not require a BDA, or a standard two-way radio Repeater may be sufficient.)
- Many buildings benefit from having BDAs, including hospitals, office buildings, schools, manufacturing plants, sports arenas, and more.
- Depending on the equipment chosen and how it is installed and programmed, BDAs can be deployed to improve team communications for facility staff who use two-way radio systems (usually VHF or UHF bands) and/or to meet Public Safety radio coverage requirements, as required by law (usually on the 450/700/800 MHz bands).
- Public Safety radios help keep first responders in contact with each other during an emergency. It increases their safety, but it helps public safety professionals serve building occupants and visitors better, as well.
- Cellular BDA is also available to help improve cell coverage in buildings. These are specifically for cellular devices and will not increase two-way radio coverage. Therefore, it’s recommended to install two separate systems for your building: one for two-way radios and one for cell phones.
Public Safety Distributed Antenna Systems (DAS)
- Also called an Emergency Responder Radio Communication System (ERRCS)
- Ensure that first responders have reliable radio communication in buildings and structures that might otherwise have areas with poor wireless coverage or heavy interference.
- Public Safety DAS is a relatively new development in the life-safety space. However, International Fire Code Section 510 (IFC 510) requires approved radio coverage for emergency responders in all buildings, making DAS an essential, code-driven system
- Improve radio communications - Boost the signal indoors for communication reliability of any two-way radio system in any frequency band - public safety or private enterprise.
- Comply with local mandates - Local jurisdictions may require adequate in-building coverage for public safety two-way radio systems before a building can be occupied.
- Lower total cost of ownership - A properly designed DAS can support multiple two-way radio systems, both public safety and private.
- Businesses like Tech Electronics St Louis
Radiating Coax (Radiating Coaxial Cable)
- May also be called "leaky coax"
- An application may require that the receiver be installed in one area, while the transmitter is used in another. In such an application, remote mounting the antennas insures that the performance area will receive proper RF coverage. Choosing the correct antennas, cabling, and mounting systems is essential for proper installation and Shure offers technical bulletins on this subject. But when the area being covered is an unusual shape, or if there are several areas, or if multiple floors of a building need to be covered with the same wireless system, radiating coaxial cable, or "leaky coax", can often provide a better alternative to stand-alone antennas.
- Similar to the standard coax cable used when mounting antennas remotely. What differentiates radiating coax are slots cut in the cable shield that allow RF to exit or enter the cable at any point along its length. An analogy is that of a light bulb and a fluorescent tube. While the bulb is a point source of light, like a whip or telescoping antenna, the fluorescent tube distributes light evenly along its entire length.
- Often used for distributed communication systems in tall buildings, tunnels, mines, and subway systems. The cable can be designed to handle any number of frequency ranges and can be installed in numerous ways. There are specialized mounting accessories and some cable designs are thin strips which can be mounted along ceiling tiles. Plenum-rated cables are also available.
For wireless microphone systems, radiating coax may be used in situations where a standard antenna will not provide adequate coverage. This cable can be fairly thick, 0.5 to 2 inches in diameter, so it is best suited to permanent installations, e.g. a museum with several floors. A single length of cable can be installed near the ceiling of each area that needs to be covered. Avoid placing radiating coax directly next to metal surfaces; it should be at least 2 inches away. Because the cable can potentially pick up more outside interference than standard coaxial cable, the transmitter should be within 40 feet of the cable for best performance. A 50 ohm termination load must be used to prevent standing waves or an unacceptable amount of signal loss. If there is a need to cover an outdoor area as well, the radiating coax can be terminated with a 1/2 wave antenna.
Radiating coax is also useful for personal monitor systems (PSM). In this application, the PSM transmitter drives the radiating coax and the PSM receivers pick up the RF signal being radiated.
Like standard coaxial cable, cable length and operating frequency directly effect the signal loss of radiating coax. In order to minimize losses or the impact on overall system performance, a large diameter cable must be used for longer length runs or higher frequencies.
SIMULCAST, etc.
Simulcast
Conventional Analog
- For example, a countywide Fire paging (tone-out) system using only 1 frequency. Multiple towers scattered throughout the county linked and synced to broadcasting the exact same traffic, all at perfectly the same time.
If it's off sync, it can cause pagers to not properly pick up the paging tones. Radio/Scanner users may hear the slight delay (or if it's actually out of sync, a bad delay)
- A bad simulcast delay would sound like this <<Insert YouTube/xxx link>>>
Conventional P25
- Same as analog, but with P25 can be synced by better means.
- How Simulcast works
Simulcast on 700/800 MHz system. Multiple towers with the exact same frequencies, in the same general area, broadcasting the exact same traffic, all at perfectly the same time. Radios and Scanners have to pick up the towers, that are all broadcasting, with different reception levels.
DMR (or NXDN ???) Conventional Simulcast
- Example, a college with 25 buildings across multiple acres. Could have just a few talkgroups needed/in use. Let's say 1 for Security/Admin, 1 for Maintenance, 1 for Janitorial/Housekeeping. Have 1 repeater at 5 different locations using 5 different frequencies, all capable of 2 SLOTS. All 5 frequencies will broadcast the exact same talkgroups on SL 1 and SL 2
What is Multicast?
Using a P25 800 MHz system, but the talkgroup traffic is also broadcasted on the old VHF system. It may be PATCHED, it may work both ways. Talk on the old analog frequency and you can talk on the units on the P25 system.
Inter RF Subsystem Interface (ISSI)
- For example, in Georgia, Fulton County and Cobb County have created an Inter RF Subsystem Interface (ISSI) link that allows users of certain Cobb County talk groups to automatically roam onto the Fulton County P25 system in certain areas where the Cobb County system has weak coverage but the Fulton County system has strong coverage. A temporary talk group on the Fulton County system is automatically assigned and linked back to the user's home talk group on the Cobb County system. Currently, Cobb County PD Precinct 2 units have access to such a temporary, automatically created ISSI patch on the Fulton County system. The talk groups below are part of a pool of talk groups that are automatically randomly assigned by the Fulton County system for these temporary ISSI links on an as-needed basis, with no user, dispatcher or system administrator intervention required. See Fulton County Public Safety P25
ANTENNAS
- Note: Some antennas are made to RECEIVE ONLY. So may be able to transmit a certain amount of wattage.
- [ The Future of Antenna Technology (innovations unleashed)] (by Antenna Expert, on YouTube)
How Antennas Work
Portable Antennas
Mobile Antennas
- Magnet Mount
- NMO
- Clip-On / Gutter Mount
- Canister Type - a low profile narrow band antenna such as the Antennex Phantom series TRA1500B. Not only is it a smaller target and narrow band, but because it is a canister type antenna (about the size of a soup can) you have more mounting options such as behind the grill of the vehicle.
- Through-Window
Base Antennas
- Poles, Chimney Mount
Special Situations
- HOA or spouse doesn't allow outdoor antennas ----- MOVE and/or divorce
- Attic
- Live in an apartment
- Live in a High-Rise without accessible windows.
- Live in a High-Rise with accessible windows.
- On the road, at a hotel, motel. etc.
- Campers, Camping, RVs
- Boats
FEED LINE / CONNECTORS
- Type of adapters / uses
- COAX
- SPLITTERS, Stridesburg, etc
- How to get coax into your house and keep it neat.
Attenuation
- Do you live close to cell phone towers, paging, large industrial, Public Safety or 2-way radio towers?
- You many need to attenuate your signal, either by frequency or the whole scanner (Global)
- Bands / Filters
- IF Frequency on your receiver xxxx
????
REFERENCE
Acronyms / Abbreviations
- AES - Advanced Encryption Standard which is a 256 bit algorithm. (P25) General use and is the required format for interoperable encryption.
- ALGID - Algorithm ID (for P25 Encryption)
- AM
- CAI - Common Air Interface #############
- CSQ - Carrier Squelch ####### (See terms)
- CTCSS
- CDCSS - See DCS
- DCS - Digital Coded Squelch (used on analog conventional)
- DPL - See DCS
- DES - Data Encryption Standard -- algorithm, which uses 64 bit Output Feed Back and is denoted as DES-OFB (P25). An encryption standard using a 56 bit key that was
previously approved by the Federal government. This standard is no longer certified by the Federal government but is still in widespread use.
- DTMF - Dual-Tone Multi-Frequency” - a signaling scheme used by the telephone system in which two voice band tones are generated for each keypad key press######
- Used by some two-way radio systems and Outdoor Warning Sirens
- DVP - Digital Voice Protection - An encryption algorithms used to provide secure voice radio transmissions
- DVRS - seeeeeee############
- FCC
- FDMA - Frequency Division Multiple Access (Phase I) More info
- FIPS - Federal Information Processing Standard (FIPS)
- FIPS Code - ###########NWS
- FM
- FMN (see NFM)
- ISSI - Inter Sub-System Interface
- KID - Key Identifier for Encryption (P25)
- KMF - Key Management Facility (P25)
- LMR - Land Mobile Radio
- LRRP (dsd+)
- LMR - Land Mobile Radio
- MDC - Mobile Data Computer (laptop in vehicle
- MDT - Mobile Data Terminal (laptop in vehicle
- NFM
- NIST - National Institute of Science and Technology - laboratory as compliant with the security requirements $$$$$$$ (P25 Encryption)
- NPSPAC - National Public Safety Planning Advisory Committee - User/industry advisory committee established by the FCC to develop a plan for the use of the 800 MHz Public Safety spectrum.
- NSW - National Weather Service (US Govt, NOAA) ###
- OTAR - Over The Air Rekeying
- OWSR - Outdoor Warning Sirens (these are general meant only to be heard when outside) (Tornado sirens etc)
- PTT - Push-to-Talk (switch on a radio that "key" up a radio transmitter by Mic*
- P25 - Project 25 - Defines system interfaces that are utilized to build P25 communications networks. TIA-102 Standards documents define the messages and procedures required for P25 features to operate across the P25 system interfaces.
- RF - Radio Frequency [also See RF-Link below)
- RID
- SCADA -
- TDMA - Time Division Multiple Access (Used on DMR, P25 Phase II; see above)
- TGID - Talkgroup ID
- TRS - Trunked Radio System
- UHF - Ultra High Frequency (300 MHz - 3 GHz)
- UID - Unit ID (see also Working Unit ID / WUID) see RID * (P25)
- VHF - Very High Frequency (30 - 300 MHz) may also be called "High Band"
- WUID - Working Unit ID (see UID) (P25)
- WFM
Emissions
- CSBK
Terminology
- Bandwidth - The difference between the limiting frequencies of a continuous frequency band. Typically measured in Kilohertz. May be considered the amount in kilohertz required for a single communications channel.
- Base Station
- Carrier Squelch - A radio receive mode of operation that causes the receiver to unmute in the presence of a received signal
- Channel Spacing - Typically measured in kilohertz from the center of one channel to the center of the next-adjacent-channel. May, or may not, be identical to bandwidth
- Clear Channel - Usually referring to AM stations that (only had
- Covert - Adjective used to describe undercover operations by government agents. “Covert” communications are generally encrypted
- Encrypt/Encryption/Encrypted - A coding of plain voice or text, into unintelligible forms, for secure transmission, that cannot usually be decoded by those without a "key"
- Firmware - Software that is stored in a device, such as a scanner/receiver/two-way radio, that is used to operate the device. Manufacturers can send out updates if/when they elect.
- Fixed Base / Control (Repeater input)xxxxxxxxxxxxxxx
- FLEET - While in many cases, these usually is a companies "vehicles", Fleet is used in the communications world as "radios" (mobiles, portables, etc) *may also be referred to as "Subscriber radios"
- Full-Duplex - Transmission is permitted, simultaneously, in both directions on a telecommunications channel.(requires 2 channels/frequencies)
- High Band - VHF (usually referred to the 150-174 MHz band, but technically includes others)
- Input
- Landline - Telephone (old-fashioned telephone service/call)
- Low Band - Usually referring to radio systems operated below 45 MHz
- Output -
- Packet - terminology // noun - ham radio term
- Public Service - By Telephone (used by Public Safety for meaning info from telephone, etc)
- Repeater -
- RF Link -
- Secure - Encrypted
- Signal (How is my signal)
- Silent - Station is off the air
- Silent Key - Ham Radio operator (who has past away) "John WB9ABC is a silent key"
- Simplex -
- Squelch
- Strapped - Talkgroup is always encrypted and cannot be turned off (opposite: user selectable)
- SUBSCRIBER - Radios that "subscribe" (have access) to the radio systems (mobiles, portables, desktop control stations, repeaters, DVRS, etc)
- Twenty One - Reference to 10-21 10 Code for telephone call
- Vehicular Repeater /// mobile extenders // DVRS
- Related wiki pages
- National Communications Magazine
- Mark's Scanners Easier-to-Read Scanner Manuals (Highly recommend)
Codes
- 10-Codes
- Common Language Protocol - (The Agency is) Using no codes at all. All plain language
- TIPS - Illinois State Police codes (mostly not used any longer)
Abbreviations/Codes/Terms for Radio Traffic
some terms above may need to be moved here
- Flatbed - Flatbed truck for towing (either too big or too damaged to drag with a tow truck)
- Hook - Tow Truck
- Next on the list - Driver didn't request specific tow truck, so use the in-house list of rotating tow trucks
- In-house - Usually referring to the Local/PD's database on information (Phone numbers, addresses, citizens)
- NCIC
Scanner Websites/Social Media/eMail Groups/YouTube
Learning
- THIS wiki page!
- The Scanner Guys Website Facebook YouTube
- Scanner School Website, with Phil Lichtenberger YouTube Patreon
- Mark's Scanners "Easier-to-Read" Manuals Website
Two-Way Radio
- [https://www.taitradioacademy.com/ Tait Radio Academy - Learn everything you need to know about LMR (Land Mobile Radio)
YouTube
- Boy and a Scanner All things scanners and radios! Get yer freq on! Website
Discord
- Scanner School
Discussion/Forums
- RadioReference Forums
- ioGroups (replacement eGroups/YahooGroups)
Places to buy Scanners, Pagers, Antennas, Feed Wire and more
- ScannerMaster (Use this link to give referral money to ScannerSchool!
- Zip's Scanners
- HRO ?
- MFJ (closing it's local manufacturing in May 2024, will still distribute products by other manufacturers)
Two-Way Radio Sales and more
- Bearcom (North America's Largest Voice, Video And Data Rental Partner For Live Events, Industrial And Market Solutions)
- Futurecom Systems Group (a Motorola Solutions Company as of Oct 2022) DVRS Testing Series on YouTube
Datatronics (Metro St Louis)
- Vehicle Upfitting Services (Public Safety/Municipal in Greater St Louis , Northeast MO, and Southwest IL
- Two-way Radio and Wireless Communications Solutions (Motorola Solutions channel partner)
- Marine Electronics (for ships on the Mississippi River and other lakes/waterways throughout the Midwest)
- DVRS
Warner Communications (Metro St Louis)
- Radio systems, Rentals and wide-area coverage systems Location Map
- P25, TETRA, NXDN, DMR Tier 2 and Tier 3, fleet vehicle installs, connecting multiple sites over IP, and building and deploying dispatching solutions are some of our specialties.
- Bought IE Communications in Trenton IL in 2015
- 2014 acquisition of Dittronics in Benton MO (Founded in 1974, serving the SE MO region for 40 years.)
- 2000 bought some assets of former St. Louis company A&E Electronics
- Voceon founded in Houston TX in 2015, expanded into Chicago in 2016 and San Antonia in 2018
WirelessUSA (Metro St Louis)
- Website Based out of Maryland Heights MO, with satellite offices in Collinsville IL....... Jefferson City MO
- Trunked Radio Systems
(ILLINOIS)
BeckTech - A Barbeck Company
- Website Offices in Decatur, Dixon, Effingham, Urbana IL
- WAVE PTX™ from Motorola Solutions / Push-to-Talk Wide Area Coverage Nationwide PTT Website
DataTronics (Alton IL)
MISSOURI
Radio Comm. Co
- Website
- A Motorola Solutions Channel Partner is based in Washington, MO. We are located about 50 miles west of St. Louis. We are uniquely geographically situated in Missouri to serve both rural communities and the St. Louis metro area.
Some of the counties and cities in our local service area include: Franklin County Jefferson County St. Charles County St. Louis County Sullivan County Warren County
Central Communications Service Company (Sedalia)
- Website Appears to currently be down
(ARKANSAS)
Smith Two-Way Radio Inc (Fayetteville)
Frequency Coordination
- See WIKIPEDIA for full explanation; WIKIPEDIA on Coordinators APCO
- Frequency Coordination is a technical and regulatory process that removes or mitigates radio-frequency interference between different radio systems that operate on the same frequency or adjacent frequencies.
- The Federal Communications Commission (FCC) has certified specific associations to perform the coordination process used to choose appropriate frequencies for land mobile radio systems before they, the FCC, will accept applications for licensees to operate two-way radio systems. This is essential to ensure the numerous systems across the country have clear and interference-free operation on their critical radio systems.
- It is REQUIRED for (nearly) all FCC Part 90 radio radio frequency applications and many "major" modifications. (Major has a certain definition per the FCC rules).
(mix
- Anything that requires Frequency Coordination must be electronically submitted by the Coordinator. Frequency Coordination is required for a new filing. Major Modifications and Amendments that change or add frequencies, emissions, ERP, Output Power, Antenna Height, Ground Elevation, change location of Base, Fixed, Mobile or Control stations or number of Mobile units and any change to station class. (Hydro frequencies listed in CFR 47 Section 90.265(a). Go through the National Oceanic and Atmospheric Administration (NOAA) for coordination.
- Frequency Coordination is not required for STAs unless the applicant is requesting a waiver of the 180-day limit of STA. Developmental and Demonstration applications, Radiolocation (RS) applications, Itinerant operations and station classes ending in the letter "I" or "L" and applications for 6.1 Meter Control Stations.
Frequency Coordinators
- Public Safety Coordinators (FCC)
- APCO International Public Safety
- Enterprise Wireless (EWA)
- RadioSoft
- AAR (American Association of Railroads)
- The only Frequency Coordinator for the railroad frequencies, 160.215-161.565 MHz and 452 and 457 MHz bands. Can also help with General Business Pool 30-50 MHz,150-173 MHz, & 450-470 MHz bands; can assist with frequencies in cooperation with the Automobile (LA), Petroleum (IP), Power (IW) frequency coordinators.
Frequency Consulting and Advisory
- ATEC Wireless (RF engineering services firm)
Licensing
FCC
New Licenses / Modification Applications
Notice of Return letter
- This letter is sent when the FCC finds discrepancies in the application submitted. It will need to be corrected in ULS as an application amendment. See LINK
Searching the database
Renewing Licenses
Construction/coverage reminder letter and build out deadline (FAILURE)
- The buildout deadline is the FCC’s request that all license holders notify them when the frequencies have been placed into service. You have 1 (one) year from grant date to do this. Approximately 90 days from the build out deadline, the FCC will send a courtesy letter notifying you of this deadline in the form of a Construction/Coverage letter. Not filing within a timely manner will result in frequency termination. LINK
Need Two-Way Radios? Frequencies??
- Part 95 FRS, MURS, GMRS
- license itinerant frequencies for a wide area.
- Available frequencies:
- OVERUSED frequencies: 464.5, 469.5, 464.55, 469.55, 151.505, 158.4 and others. Often 67.0 PL tone
Related Wiki Pages (Coming soon)
- Metro St Louis Road (info and construction)
- Metro St Louis Radio Stations - AM
- Metro St Louis Radio Stations - FM
Metro St Louis Radio Personalities/Shows
Farmer Dave Schumacher
- 5-6 AM on 550 KTRS St Louis; Mon-Fri, Market updates at 10 AM and Noon. (Sat version 6-7 AM with ....)
- Last show after 28 years, was on Friday April 12, 2024
- Webpage Facebook page Facebook Fan Group Past Shows on Soundcloud
Frank O Pinion / Large Morning Show in the Afternoon
- RR Wiki page FOP Website Facebook page Facebook Fans group
- Not currently on a station or broadcasting on the internet
JC Corcoran
- K-WOLF Mornings (as of 2023)
Search and Rescue Mutual Aid (SARMA)
- Former Illinois Weather Alert Radio Network (I-WARN)
- 155.205 assigned for use in Illinois statewide, Temporary Base, mobiles, Base Station located in Madison County. May also be used in St Louis City and County WQCI585
- 152.285 Repeater with 157.585 input (licensed, but no longer on air). Bases licensed in Illinois, but mobiles on both frequencies authorized for use in Missouri, Illinois and Indiana WQBB433