Difference between revisions of "TrunkTracker IV"
From The RadioReference Wiki
m (updated link to avoid redirect) |
m (clean up poor english, correct errors) |
||
(5 intermediate revisions by one other user not shown) | |||
Line 1: | Line 1: | ||
− | Uniden's implementation of trunked two-way radio system monitoring in a scanner. Update to their [[TrunkTracker III]], precursor to [[TrunkTracker V]] | + | Uniden's implementation of trunked two-way radio system monitoring in a scanner. Update to their [[TrunkTracker III]], precursor to [[TrunkTracker V]]. The [[BC296D]] / [[BC796D]] models still use the Bank method, except for Trunked Radio Systems are entered into a Bank and Sub-Bank layout, with Talkgroups laid out in 10 groups of 10 per Trunked Radio System with x-1 being the Priority TGIDs. Both are [[Rebanding]] supported but the optional P25i card must be installed to receive P25 CAI . The [[BCD396T]] / [[BCD996T]], [[BCD396XT]] / [[BCD996XT]] and the [[HomePatrol-1]]. Colloquially called, (in the order listed) the x96D - but not normally, the T's and/or XTs and sometimes refer to as T/XT line, or HP-1, respectively. All are [[Rebanding]] supported, and do support up-to Phase I Digital voice (P25 CAI) decoding of transmissions. |
− | TrunkTracker IV can follow transmissions | + | |
+ | |||
+ | TrunkTracker IV can follow transmissions Trunked Radio Systems: | ||
+ | ;System Types | ||
+ | *Conventional Frequencies | ||
* [[Motorola Type I]] | * [[Motorola Type I]] | ||
* [[Motorola Type II]] | * [[Motorola Type II]] | ||
− | * [[Motorola Type IIi Hybrid]] | + | ** [[Motorola Type IIi Hybrid| Hybrid]] |
− | * [[ | + | ** [[Motorola Type II Smartnet| Smartnet]] |
− | * [[EDACS]] | + | ** [[Motorola Type II SmartZone| SmartZone]] |
− | * [[LTR]] | + | *** [[Motorola Type II SmartZone OmniLink| SmartZone Omnilink]] |
− | + | * [[EDACS]] | |
+ | ** [[EDACS Standard| Standard]] (FM-Wide) | ||
+ | *** Networked | ||
+ | ** [[EDACS Narrowband| Narrowband]] (NFM-Narrow) | ||
+ | *** [[EDACS Narrowband Networked| Networked]] | ||
+ | ** [[EDACS SCAT| SCAT]] | ||
+ | ** [[ESK]] | ||
+ | ** [[EDACS Provoice| ProVoice]] <sup>1</sup> | ||
+ | * [[LTR Standard]] | ||
+ | * [[APCO Project 25]] Standard | ||
+ | ** [[APCO Project 25#Project 25 Phases| Phase I '''ONLY''']] | ||
+ | |||
+ | ;System Voices | ||
* Analog | * Analog | ||
− | * | + | * EDACS |
+ | **Analog ONLY | ||
+ | *[[P25 CAI|P25 Common Air Interface]] | ||
+ | **Phase I '''ONLY''' | ||
+ | |||
+ | |||
+ | |||
+ | |||
[[Category:RR Glossary]] | [[Category:RR Glossary]] |
Revision as of 07:56, 1 September 2017
Uniden's implementation of trunked two-way radio system monitoring in a scanner. Update to their TrunkTracker III, precursor to TrunkTracker V. The BC296D / BC796D models still use the Bank method, except for Trunked Radio Systems are entered into a Bank and Sub-Bank layout, with Talkgroups laid out in 10 groups of 10 per Trunked Radio System with x-1 being the Priority TGIDs. Both are Rebanding supported but the optional P25i card must be installed to receive P25 CAI . The BCD396T / BCD996T, BCD396XT / BCD996XT and the HomePatrol-1. Colloquially called, (in the order listed) the x96D - but not normally, the T's and/or XTs and sometimes refer to as T/XT line, or HP-1, respectively. All are Rebanding supported, and do support up-to Phase I Digital voice (P25 CAI) decoding of transmissions.
TrunkTracker IV can follow transmissions Trunked Radio Systems:
- System Types
- Conventional Frequencies
- Motorola Type I
- Motorola Type II
- EDACS
- LTR Standard
- APCO Project 25 Standard
- System Voices
- Analog
- EDACS
- Analog ONLY
- P25 Common Air Interface
- Phase I ONLY