BCD436HP and BCD536HP Scanner FAQ

Welcome to the BCD436HP and BCD536HP Scanner FAQ. This will cover the BCDx36HP Series 3 tier DMA scanners. Please feel free to add any commonly asked questions and answers related to these 2 scanners here. This page is devoted to usage, concepts, firmware and known issues. Items regarding software, third party accessories, reflectors and YouTube videos can be found on page 2 of this document. Uniden's Sentinel Software has its own special pages listed under Sentinel (Uniden software).

NOTE: We have separate FAQs for other Uniden products;

• If you are looking for HomePatrol-1 or HomePatrol-2 information, see the Uniden Home Patrol FAQ
• If you are looking for other Uniden 2 tier DMA driven scanners, see the Uniden DMA FAQ
• For the SDS100 and SDS200, see the SDS100 and SDS200 FAQ Page

The Nuts and Bolts

• If you're a newcomer, you've probably already discovered that there's a huge amount of terms that seem unfamiliar to you. Our Glossary has lots of these terms, along with definitions. Just click on the term you wish to view.

• When looking at frequencies in our database, float your mouse over the column header, and you should get a balloon with a brief description of the terms and abbreviations that are used there.

• The biggest hurdle for many is the concept of trunking. Our Trunking Basics article will get you started, as well as this PDF file written by UPMan. Note that you will need Adobe Acrobat or a compatible reader (such as Foxit) to read it.

Relevant Source Material

Easier to Read Manuals

• Easier to Read BCDx36HP Digital Scanner Manual
• BCDX36HP Sentinel Manual

Other Links

• DMR Search Spreadsheet (Created by UpMan, Modified by DSalomon)
• Nifty Electronics - Uniden Setup and Operating Guides

Related Wiki Articles

• BCDx36HP Series
• Location Based Scanning
• Uniden BCDx36HP Quick Keys and Number Tags
• Uniden DMA FAQ
• Uniden Scanners Systems, Sites and Groups/Departments
• Uniden Multi-Site Trunking
• Working with Scanners with Secure Digital (SD) Cards

Uniden TWiki Links

• Uniden Official BCD436HP TWiki Page
• Uniden Official BCD536HP TWiki Page

What Must I Do First?

• For the 436, see the instructions on the Uniden Official BCD436HP TWiki Page
• Or if you got the 536, follow the instructions on the Uniden Official BCD536HP TWiki Page. Be sure to update the firmware in the radio along with the firmware in the WiFi Dongle. See the answer below for the WiFi updates.

My new BCD436HP/BCD536HP is constantly asking me to set the time and date...what gives?

• From Uniden's UPMan:

Keep the Time!
Plug in your scanner and turn it on. The first things you'll see are prompts to set 
the date and time. The scanner has a real-time clock with backup power that will run 
the clock for about 1 week. The backup power needs to charge for about 50 hours 
before full backup-time becomes available. If the backup source is depleted before
power is restored, you will be prompted to set the time again upon power up.

• Upgrade the Firmware to a newer one if prior to 1.09.02.

Where do I go to register my new scanner(s)?

• Go to my.uniden.com

BCD536HP Only

Where can I download "Wi-Fi-Updater.zip"?

• Download the file from here
  • Run these updates as Administrator to ensure full hardware access.
  • Thread on wifi issues

Feature List and Function Discussions

DMR/MOTOTRBO Programming

• See the DMR and MOTOTRBO Tips for the BCDx36HP and SDS Scanners

Firmware

• Where is the official BCD436HP Firmware page?
  • Go to this page on the Uniden TWiki
• Where can I find the ProVoice or DMR upgrade for my BCD436HP?
  • Go to the BCD436HP TWiki and click on the appropriate button
• Where is the official BCD536HP Firmware page?
  • Go to this page on the Uniden TWiki; f/w update can only be made through the front port or by dropping f/w bin file into Firmware Folder
• Where can I find the ProVoice or DMR upgrade for my BCD536HP?
  • Go to the BCD536HP TWiki and click on the appropriate button
• Where can I find information on the NXDN update for the 436 and 536?
  • The page can be viewed here. Follow the instructions provided.
  • The upgrade is discussed in the NXDN Now Available for the 436, 536 Thread

I-Call

How do I set up I-Call (also known as Private Call)?

• See this section in the Easier to Read manual

LCN Finder

• LCN Finder (Easier to Read 436 / 536 Manual)
• LCN Finder Need Help Thread

Manually Add a P25 Frequency to any list

• See the Manually Add New P25 Frequency To Any List Thread

Modifications and Repair

(BCD536HP) Can I access the discriminator?

• Rich Carlson detailed how to tap the discriminator in this forum thread: Discriminator Tap Mod Thread

(BCD536HP) How do I replace the Backlight LEDs?

• Discussion (include pictures): Got tired of the dim pale blue BCD536HP display Thread

(BCD436HP) How do I mod the background color of the screen?

• Discussion (include pictures):436HP Mult-Color Screens Thread

Can the power cord from BCD996XT be used with the 536HP?

• Yes, in-theory any Power cord from 10.5vDC at 1500ma/1.5amp to 16v at 500ma/.5a with 5.5mm o.d-2.1mm i.d can be used, double check polarity.

NXDN Programming

• See the NXDN Tips for the BCDx36HP and SDS Scanners

Issues Discussions (General)

• Also see the Issues section of the BCDX36HP article

Audio from Simulcast Systems

The audio from my simulcast digital system is lousy / distorted. What is wrong?

• See the Simulcast digital distortion article for a full explanation
• Also see the Loose Open Squelch Improves Simulcast Reception Thread
• See the P25 audio decode level adjustment article for adjustment procedures
• Upgrade to firmware 1.11.31 even if you don't need ProVoice or DMR, some algorithms have been re-written with fixes

Favorite Lists

Are Favorites Lists automatically updated when the database is?

• No. It is prudent to keep an eye on the Favorites Lists you plan to use regularly and compare them to the latest database.

FM Broadcast Interference

I suspect I have issues with local FM BCers overloading my scanner. What are some good FM traps to use on these scanners?

• See the FM Bandstop Filter Comparison Thread

Headphones

If I am having headphones-issues, what can I do?

• See the UPMan's answer on headphones issues Thread
• If using noise-canceling headphones, don't, the audio output circuits were made for 32ohm headphones.

Noisy VHF Hi / UHF Reception

VHF-Hi and/or UHF Reception is noisy; the scanner seems less sensitive on this band when compared to other radios

• I get a lot of noise decoding a DMR (digital) UHF signal
  • See this Thread for a full discussion of this topic

Nothing to Scan

• See the Nothing to Scan article

Quick Keys

I am a little confused... What's the difference between Quick Keys and Number Tags?

• See the Uniden BCDx36HP Quick Keys and Number Tags article in our wiki

How do I use Favorites Lists and Quick Keys?

• See these, halfway down, on their respective pages: Favorites, Systems, Departments or Multi-Site Trunking
• A Favorite does have to be Downloaded, Monitored, and Enabled, then the System has to be Enabled, then as well the corresponding Department - Group of TGID(s) and Site(s)

Receiving P16 or P25 Systems

I'm having trouble receiving P16 or P25 systems. Is there a fix?

• See the UPMan's suggestion for P25 reception Thread
• See the P25 audio decode level adjustment article for adjustment procedures, believe it or not, before Audio can be decoded the CC has to be, so adjustment of decode will effect both reception ability and decode ability.
• See the Simulcast digital distortion article for a full explanation
• Check Band Plan setting is set to Custom for Motorola Type I or Type II where it's 800 MHz, or VHF or UHF, proper plan should allow reception
• Check to see System Hold Time is greater than 2 and "Digital Threshold Mode" is set to "Manual", for LSM Phase I or Phase II systems.

Simplex Reception

Why is Simplex reception not perfect?

• Scanner is has only a single receiver, not the 2 required for proper decode and reception.
• You may have overloaded the scanner with your Transceiver - transmitting close by.
• Try FM instead of NFM with Manual Digital Threshold Manual of between 1-5 available in ProScan and ARC.

Unit IDs (UIDs)

My Unit Id's UID are not displayed correctly, even when replayed?

• During a constant transmission, the scanner does not attempt to decode the UID multiple times, so therefore until transmissions breaks, the scanner will not re-attempt to decode another units identification number, as well as its not decoding digital data on the Control channel while it's on a voice channel, like your SDR or Commercial Radio can.

Issues Discussions (BCD436HP)

My BCD436HP seems to have "gone deaf"

In order of likelihood:

1. Actual "Site" has switched to a different Control Channel
2. DQK is not Enable/On, as well as Systems QKs or Favorites QKs aren't Enabled.
3. Site is "Avoid"ed, and/or a frequency is Avoided (possible with older version of software)
4. This is a situation where your unit has been operating without any issues, the user has made no changes to lists, the unit has not been moved, and the departments have not gone encrypted. In other words, everything looks fine but the unit just does not receive anything anymore. You will say, "It was working yesterday but today I'm not receiving anything." If you cannot even receive NOAA broadcasts, your unit has "gone deaf" and will need to be repaired. This is a repair covered under the Uniden one-year from purchase warranty and involves replacing the Q2 and Q3 circuits. When you ship the unit, describe the problem as "No channel reception."
5. Site is Down

Issues Discussions (BCD536HP)

Dongle is not found

Im having issues with my 536 not finding the dongle

• See the BCD536HP Not Reading WiFi Dongle Thread

---

• Go to page 2 of this document

Return to

• BCD436HP
• BCD536HP